DC/DC Converter offers output disconnect and soft-start.
October 4, 2006 -
Model LTC3526 1 MHz current mode, synchronous boost dc/dc converter has internal 500 mA switches that deliver 5 V output from 0.85-4.4 V input, making it suitable for Li-Ion/Polymer or single/multicell alkaline/NiMH applications. Available in 2 x 2 x 0.75 mm DFN package, LTC3526 delivers up to 100 mA of continuous current at 3.3 V from single alkaline cell. Synchronous rectification enables efficiencies of up to 94% while Burst ModeŽ operation lowers quiescent current to only 9ľA.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
LTC3526: 500mA, 1MHz Synchronous Boost Regulator Offers Output Disconnect & Soft-Start in a 2mm x 2mm DFN
MILPITAS, CA - August 31, 2006 - Linear Technology Corporation announces the LTC3526, a 1MHz, current mode, synchronous boost DC/DC converter with output disconnect and integrated soft-start capability. Its internal 500mA switches can deliver output voltages as high as 5V from an input voltage range of 0.85V to 4.4V, making it ideal for Li-Ion/Polymer or single/multicell alkaline/NiMH applications. The LTC3526 can deliver up to 100mA of continuous output current (at 3.3V) from a single alkaline cell. Synchronous rectification enables efficiencies of up to 94% while Burst ModeŽ operation lowers quiescent current to only 9uA, providing extended battery run-time in handheld applications. The combination of a 2mm x 2mm DFN-6 package and a constant switching frequency of 1MHz minimize both inductor and capacitor sizes, providing a tiny solution footprint required in handheld applications.
The LTC3526 uses internal switches with an RDS(ON) of only 0.40 Ohm (N-Channel) and 0.60 Ohm (P-Channel) to deliver efficiencies as high as 94%. The output disconnect feature allows the output to be completely discharged in shutdown. It also limits the inrush of current during start-up, minimizing surge currents seen by the input supply. Additional features include anti-ringing control, short-circuit protection, soft-start, and thermal protection. The LTC3526 delivers an ideal solution for boost applications requiring up to 200mA of output current and where a small solution size and low maximum battery run-time are defining factors.
For applications demanding the lowest possible noise operation, a LTC3526B version is available with the Burst Mode feature disabled. The LTC3526B version runs in continuous mode at all current levels, slightly reducing light load efficiency. However, it minimizes possible interference of switching noise with onboard noise sensitive circuitry.
LTC3526EDC and LTC3526BEDC are both available from stock in 6-lead DFN packages. 1,000-piece pricing starts at $1.75 each.
Summary of Features: LTC3526/B
o Delivers 3.3V @ 100mA from a Single Alkaline/ NiMH Cell or 3.3V @ 200mA from Two Cells
o VIN Start-Up Voltage: 850mV
o 1.6V to 5.25V VOUT Range
o Up to 94% Efficiency
o Output Disconnect
o 1MHz Fixed Frequency Operation
o VIN > VOUT Operation
o Integrated Soft-Start
o Current Mode Control with Internal Compensation
o Automatic Burst Mode Operation with 9uA Quiescent Current (LTC3526)
o Low Noise PWM Operation (LTC3526B)
o Internal Synchronous Rectifier
o Logic Controlled Shutdown (IQ < 1uA)
o Anti-Ringing Control
o Low Profile (2mm x 2mm x 0.75mm) DFN Package
About Linear Technology
Linear Technology Corporation, a manufacturer of high performance linear integrated circuits, was founded in 1981, became a public company in 1986 and joined the S&P 500 index of major public companies in 2000. Linear Technology products include high performance amplifiers, comparators, voltage references, monolithic filters, linear regulators, DC-DC converters, battery chargers, data converters, communications interface circuits, RF signal conditioning circuits, and many other analog functions. Applications for Linear Technology's high performance circuits include telecommunications, cellular telephones, networking products such as optical switches, notebook and desktop computers, computer peripherals, video/multimedia, industrial instrumentation, security monitoring devices, high-end consumer products such as digital cameras and MP3 players, complex medical devices, automotive electronics, factory automation, process control, and military and space systems. For more information, visit www.linear.com.
Worldwide Contacts
North America and General Information
John Hamburger
Tel: (408) 432-1900 ext. 2419
jhamburger@linear.com
China (PRC)
Fanny Lau
Tel: 852-2428-0303
flau@linear.com
Japan
Kazuto Takahashi
Tel: 81-3-5226-7291
ktakahashi@linear.com
Contacts:
General Information:
John Hamburger
USA
Phone: 408-432-1900 ext 2419 E-mail this person Company Information: Name: Linear Technology Corp. Address: 1630 McCarthy Blvd. City: Milpitas State: CA ZIP: 95035-7417 Country: USA Phone: 408-432-1900 FAX: 408-434-6441 http://www.linear-tech.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
