November 3, 2009 -
Integrating GSD4e chip along with external flash, A2100-A module enhances GPS receiver capability for mobile devices. Chip features SiRFaware technology, which maintains hot start conditions continuously and can provide accurate position within seconds. With -160 dBm navigation sensitivity and -163 dBm tracking sensitivity, solution draws as little as 50-400 µA and offers capability for detecting, attenuating, and removing up to 8 different jamming signals.
With new SiRFaware technology you never walk alone
Munich, Germany - October 26, 2009 - Vincotech, a leading supplier of GPS receiver and telematics hardware solutions, announces the first modules based on the new SiRFstarIV technology. Vincotech module designs integrating the new GSD4e chip open the door for enhanced GPS receiver capability across a broad range of customer applications, including telematics, commercial and consumer mobile devices, providing a level of performance as never seen before.
The SiRFstarIV technology in CSR's latest GSD4e chip addresses the most pressing questions asked of a GPS receiver across a broad spectrum of applications demanding optimal performance in less than ideal operating environments. The first requirement is the availability of position information to the receiver, as needed, when needed. The GSD4e chip, with SiRFaware technology, provides hot start positional fix within a matter of seconds, regardless of the power-off state of the receiver before a fix was requested. SiRFaware maintains hot start conditions continuously and can provide an accurate position within seconds. Secondly, position data will be available and continuously maintained under even the harshest environmental conditions. With -160dBm navigation sensitivity (calculating new positions) and -163dBm tracking sensitivity (following the satellites' signals) the GSD4e GPS technology creates an unimaginable enhancement in the user experience.
In addition, the SiRFaware mode addresses a requirement that is becoming increasingly critical in the integration of GPS receiver capability in mobile devices; namely, minimizing power consumption to the lowest possible level. In this mode the GSD4e draws as little as 50 to 400µA.
As mobile device product designs and application development evolves to address market requirements, the need for GPS receiver technology to be integrated efficiently alongside other wireless interfaces, including WLAN, Bluetooth and Zigbee becomes apparent. The new GSD4e chip technology, having the capability of detecting, attenuating and even removing jamming signals completely, alleviates the issue of having multiple radios functioning effectively alongside the SiRFstarIV GPS receiver in a mobile device. During the design phase of new products such jammers can be detected and therefore attenuated if not eliminated. In addition, with its active jammer removal capability, the GSD4e is the solution that addresses the issue of external jammers that can't be controlled. This could be motors or deliberately transmitted jamming signals within the L1 band intended to prevent GPS receivers from calculating a position. The GSD4e is capable of detecting and removing up to 8 different jamming sources.
The first GSD4e based modules by Vincotech are designed for efficient integration into mobile devices, including telematics applications, with integrated passive antenna as an option, and highest sensitivity and earliest availability of a fix being the principle objectives.
Vincotech's first module, the A2100-A, integrates the GSD4e along with external flash and adapts the 1.8V technology to the 3.3V rail widely used in the telematics world. Furthermore, in facilitating a fast, seamless upgrade path for the leading A1084-B SiRFstarIII based module, the new A2100-A is pin and footprint compatible with its SiRFstarIII based predecessor. In addressing the development of a broadening array of mobile devices requiring advanced GPS technology integration, more modules based on the two variants of the GSD4e will follow. Emphasis on features and functions will include antenna modules, implementation of 1.8V technology, and a size optimized ROM version. Additionally, the integration of the SiRFstarIV technology into Vincotech's own telematics platforms is foreseen in the near future.
Vincotech is a trademark.
ABOUT VINCOTECH
Vincotech develops and manufactures subsystems and electronic components and offers manufacturing services geared to help customers to master complex challenges in electronics integration. Vincotech's extensive portfolio encompasses standard and tailored solutions, engineering services, and technical support for customers worldwide. These products and services contribute to sustainable, environmentally sound solutions that help modern society embrace mega-trends and explore new avenues.
With approximately 600 employees worldwide, backed by vast experience and a long history in electronics integration, Vincotech leverages these assets to help customers achieve maximum market success.
Marketing:
Karina Seifert
INTL
Phone: 49-89-8780-67-115 E-mail this person
General Information:
Hans Wiedemann Head of Product Marketing POS
USA
Phone: 49-89-8780-67-151 E-mail this person Company Information: Name: Vincotech GmbH Address: Biberger Straße 93 City: Unterhaching Country: Germany Phone: http:///www.vincotech.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
