November 3, 2009 -
Designed to shorten cycle times, CR-5000 Lightning v12.0 supports interactive and automatic trombone lengthening with dynamic push-aside. Graphical layer stack editor lets users control impedance in manual and automatic routing. In addition to Signal Integrity simulation, Power Integrity, and EMI analysis features, functionality covers parameter sweep and waveform comparison, error resolution, as well as automatic escape routing and smart fan-out.
October 15, 2009 - Munich, Germany and Westford, MA, USA - Zuken is launching the latest version of its high-speed design and verification environment CR-5000 Lightning, focused on ease of use and advanced capabilities for cutting edge high-speed designs. Version 12.0 highlights include the introduction of automatic 'escape routing' and 'smart fan-out' to simplify the routing process, along with support for S-parameter models, easy-to-use parameter sweep and waveform comparison functionality, and improved error resolution capabilities for the latest high-speed boards.
Kazuhiro Kariya, Zuken's Chief Technical Officer comments on the rationale behind the new functionality in CR-5000 Lightning 12.0. "Delivering market leading products not only demands that design software solutions have the capability to deal with high-density, high-speed boards; the solutions also need to enable designers to deliver within record times. By providing automated functionality and intelligent features for improved ease of use, Zuken is directly helping companies to reduce their design cycle times. In addition, we have continued our strategy to open the access of our cutting-edge technology to a broader segment of users by improving our cross tool integration within the entire CR-5000 design solution."
Shortening design cycles with new ease of use functions
Impedance control is essential in high-speed design; in response Zuken has introduced a new graphical layer stack editor, featuring the ability to intelligently define multi-layer impedance templates for both single ended and differential signals. By applying these templates to groups of signals, the routing tools will automatically calculate the values during the routing process, allowing users to control impedance efficiently in both manual and automatic routing.
CR-5000 Lightning now supports interactive and automatic trombone lengthening, with dynamic push-aside, valuable for meeting matched route length constraints in tight spaces. And in alignment with Zuken's strategy to unify functionality across the CR-5000 environment, all interactive, intelligent lengthening functionality of CR-5000 Lightning 12.0 is also available in CR-5000 Board Designer, the core layout tool within the CR-5000 design solution.
To reduce routing time within the Dragon Autorouter, The Routing Consultant which identifies potential routing blockers now includes more checks and provides suggested solutions. In the intelligent routing strategy generation, enhancements have been made to boost routing completion and constraint obedience.
To optimize signal integrity, electrical performance needs to be analysed by sweeping various design parameters simultaneously. Parameter sweep enhancements allow users to view and compare sweep result waveforms, making it much easier to make important design decisions.
The introduction of new ease-of-use features relating to Signal Integrity (SI) simulation, Power Integrity (PI) and EMI analysis have extended the usage of such tools within the entire CR-5000 design flow, helping designers to deliver right-first-time. For example, simulation model assignment for SI analysis, and options handling and results management in PI and EMI analysis have been simplified.
Maintaining market leadership by delivering innovative high-speed design and analysis capabilities
New tools have been added to optimize the generation of fan-out and escape routing for FBGA devices. A 'smart fan-out' tool has been incorporated that can intelligently adapt fan-out patterns for a device, to avoid obstacles such as decoupling devices. Often escaping from an FPGA with routing to the rest of the design is a very complex task and can take up to one week for a large pin count device. Escape routing generates this pattern concurrently in just minutes, using the minimum number of layers required.
Zuken now supports S-Parameter models of passive components such as filters. Most signal integrity tools for PCB design operate in the time domain, while, by contrast, S-Parameter models describe high-speed signal transmission and reflection at a range of frequencies. Zuken has now married these two techniques using IdEM (provided by IdemWorks s.r.l, Italy) to transform S-Parameter models so they can be simulated in the time domain, providing extended simulation accuracy that helps designers deliver right-first-time.
Further numerical enhancements in the time domain simulation kernel have improved simulation accuracy for AC coupling and closely coupled parallel traces.
CR-5000 Lightning is available from Autumn. For more information about CR-5000 Lightning visit www.zuken.com/cr-5000-lightning
About Zuken
Zuken works globally with leading companies to optimize their electrical and electronic engineering design and related manufacturing processes through the provision of leading-edge software and consulting services. The company's unique combination of proven experience, technological expertise and agility creates best in class solutions. Zuken's transparent working practices and belief in integrity in all aspects of business produce long lasting and successful customer partnerships.
Zuken's robust market position is reinforced by an established position in the industry with over 30 years experience, and solid financial foundations. As a stable multinational company, listed on Tier 1 of the Tokyo Stock Exchange, Zuken is able to remain focused on being a long-term innovation and growth partner. The security of an investment by partnering with Zuken is further reinforced by the company's people - the foundation of Zuken's success. Coming from a wide range of industry sectors, specializing in many different disciplines and advanced technologies, Zuken's people are able to relate to and understand each company's unique requirements.
For further information and reader enquiries:
Americas
Amy Clements, Zuken USA Inc., 238 Littleton RD, STE 100, Westford, MA 01886, USA
Tel: +1 972-691-3284
Fax: +1 972-691-1304 E-mail: amy.clements@zuken.com
Web: www.zuken.com
Southern Europe
Laetitia Simonian, Zuken S.A., 3 avenue du Canada, Bâtiment Thêta 2, 91974 Les Ulis, France
Tel: +33 1 69 29 48 00
Fax: +33 1 69 07 80 85 E-mail: laetitia.simonian@zuken.com
Web: www.zuken.com
Central Europe
Petra Haberer, Zuken GmbH, Am Soeldnermoos 17, 85399 Hallbergmoos, Germany
Tel: +49 (0)89 607 696-52
Fax: +49 (0)89 607 696-01 Email: Petra.Haberer@zuken.com
Web: www.zuken.com
Contacts:
General Information:
Amy Clements
USA
Phone: 972-691-3284
FAX: 972-691-1304 E-mail this person Company Information: Name: Zuken U.S.A Address: 238 Littleton Rd City: Westford State: MA ZIP: 01886 Country: USA Phone: 978-692-4900 http://www.zuken.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
