Vehicle Data Logger acquires OBD and CAN bus data.
October 20, 2009 -
Used for in-vehicle diagnostics, DAWN(TM) Mini Logger fits within mating J1962 connector under dashboard. Stand-alone device supports leading automotive protocols, such as CAN and J1939, to acquire on-board diagnostics (OBD) and enhanced diagnostic data. Able to connecto to PC via various interfaces for data analysis and display, logger can acquire parameters from multiple controllers simultaneously. Using special test mode, data is acquired up to 250 samples/sec for each parameter.
Southfield, MI - October 14, 2009 - HEM Data (www.hemdata.com) has introduced a new mini-data logger for in-vehicle diagnostics that is the industry's smallest high speed data logger. HEM Data's DAWNTM Mini Logger is so compact that it fits within the mating OBD (J1962) connector under the dashboard. Its small size means it is easy to install since it just snaps onto the OBD (On-board Diagnostics) connector. It is then ready to acquire data and is hidden from the driver.
The stand-alone logger supports all of the leading automotive protocols including CAN (Controller Area Network) to acquire OBD and Enhanced Diagnostic data. In addition, it supports the J1939 heavy duty protocol. The DAWN Mini Logger works well for a wide range of applications including fleet monitoring, R&D, duty cycle measurements, and service. The user has the option to connect a PC to the Mini Logger for real-time data analysis and display. Computer interface options include USB, Bluetooth and a cellular modem.
DAWN (Data Acquisition With Networks) has a Windows user-interface that allows the user to easily configure the logger without any programming using flowcharts, tables and dialogs. The same DAWN software acquires and displays real-time data on a PC and configures the stand-alone logger with the parameters to acquire. The software also displays the data as a post process.
By acquiring Enhanced Diagnostic data, DAWN can acquire a few hundred parameters from multiple controllers simultaneously. Using a special test mode, data is acquired up to a rate of 250 samples/sec for each parameter. This overcomes the limitations of most acquisition tools that can only acquire from one controller at a time. It also overcomes the typical OBD limitation of only acquiring data at 20 samples/sec aggregate. Thus, 5 simultaneous parameters could only be acquired at 4 samples/sec each for a competitive system.
The Mini Logger automatically starts and stops acquiring data when the vehicle ignition is turned on and off. It has a low power mode when shutdown and a 1 year warranty. Also included are a Cabin Temperature Sensor and a 3-axis MEMS accelerometer. Options include a cellular modem and an 8 channel A/D. Storage media is up to 2 GB on a mini SD card. Its operating temperatures range from -40 to 70C and operating voltages range from 6 to 40V.
The DAWN software works with any J2534 compatible device. J2534 is the SAE standard that defines the Application Program Interface (driver API) between the PC and OBD test tool. This means that the DAWN software works with any test tool that conforms to the J2534 specification.
The introductory list price for the DAWN Mini Logger is $1,495.00 for one unit, and there are discounts for volume orders.
HEM Data
HEM Data Corporation was founded in 1986 to develop software for data acquisition and analysis. HEM Data's products include DAWN(TM) (Data Acquisition With Networks), Snap-Master(TM) (data acquisition with real-time & post analysis), and NOVA(TM) (Noise and Vibration Analyzer). Applications include: testing in vehicles, laboratory, field, and factory settings. HEM Data offers complete hardware and software solutions that work with a PC and as a stand-alone logger / flight recorder.
HEM Data Corp. conducts a seminar for the Society of Automotive Engineers (SAE) entitled "Acquiring & Analyzing Data from Sensors and In-Vehicle Networks." This seminar covers the traditional way to acquire data directly from sensors and the newer alternative to acquire data directly from the in-vehicle network, which could have hundreds of parameters available without adding any sensors. If you want this seminar conducted at your location or tailored to your applications, please contact HEM Data at support@hemdata.com, or call (800 436-4330). Tutorials for acquiring in-vehicle network data using CAN and other protocols are covered in HEM Data's eNewsletters.
Contacts:
General Information:
Rick Walter
USA
Phone: 238-559-5607 ext 111 E-mail this person Company Information: Name: HEM Data Corp. Address: 17336 12 Mile Rd. City: Southfield State: MI ZIP: 48076 2106 Country: USA Phone: 800-436-4330 FAX: 248-559-8008 http://www.hemdata.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
