NAS Appliances drive storage network performance, efficiency.
October 8, 2009 -
FXT Series automatically and dynamically moves data in real-time between Solid State and HDD tiers, promoting performance while avoiding over-provisioning of storage, inefficient use of limited data center space, and wasted power consumption. Respectively, FXT 2300 and 2500 feature eight 146 and 450 GB 15k SAS disks for total HDD capacities of 1.2 and 3.6 TB - scalable to 29.2 and 90 TB per cluster. Clusters scale to 25 appliances and support millions of operations/sec performance.
Avere Systems FXT Series Delivers High Performance and Greater Efficiencies to Storage Networks
NAS appliances scale performance to millions of ops/sec; enable a 5:1 reduction in disks, space and power.
PITTSBURGH - October 5, 2009 - Avere Systems, an emerging company focused on delivering Demand-Driven StorageTM solutions, today unveiled its FXT Series of NAS appliances that dynamically move data between Solid State and HDD tiers, yielding higher performance and lower costs while avoiding over-provisioning of storage capacity, inefficient use of limited data center space and wasted power consumption.
The FXT Series is ideal for organizations looking to improve the current performance of their storage networks while significantly driving down the cost of their existing architectures.
With the introduction of the FXT Series, business demand for rapid data access is met by storing active client data on a cluster of high-performance FXT appliances. The FXT moves inactive data to a legacy NAS file server that is optimized for capacity and data retention. System performance scales linearly by adding additional appliances to the FXT cluster and capacity scales by adding disk storage to the NAS file server or mass storage system. Decoupling storage network performance from the disk capacity available enables Avere to deliver enterprise-class application performance while slashing CAPEX acquisition costs by 60% and ongoing OPEX expenditures by a 5:1 ratio on average.
"Before we added the Avere FXT Series to our storage network, we were seriously considering replacing some of our slower mass storage systems due to their inability to keep up with client demands," said Bryan Nielsen, IT Architect at the Salk Institute. "The introduction of the FXT into our network took the load off of these devices, breathing new life into our current storage infrastructure investments. In addition, Avere's FXT opens up new possibilities in price, performance and size considerations for future storage investments."
The FXT appliances contain both solid-state storage and traditional spinning media to optimize performance without compromises on all types of workloads. Reads, writes and metadata are allocated to storage media via Avere's unique approach to dynamic tiering. Allocation algorithms running on the FXT appliance monitor access frequency patterns and workload type and manage data placement on multiple internal tiers to increase performance, distribute workload in the cluster and minimize requests to the mass storage server. Movement of data occurs in real-time - not in hours or days - and occurs at the file or even block within the file level. All of this is done automatically by the system - there are no complex policies to configure or update.
"Conceptually, an architecture like this could quite literally change everything we thought we knew about storage and I/O. If the Avere architecture can perform as intended, it might just turn decades of thinking on its head," said Steve Duplessie, Founder of ESG.
The Avere FXT Series launches with two available configurations. The FXT 2300 features eight 146GB 15k SAS disks for an HDD capacity of 1.2TB, which can scale to 29.2TB per cluster. The FXT 2500 features eight 450GB drives for 3.6TB of capacity and up to 90TB of HDD per cluster. Both appliances come in a 2U form factor and feature 64GB of DRAM and 1GB of NVRAM with a maximum of 1.6TB of DRAM per cluster. FXT clusters can scale to 25 appliances and support millions of operations/sec performance and tens of gigabytes/sec throughput. Each appliance provides redundant network ports and power and has either two 10GbE and two 1GbE network ports or ten 1GbE ports. List pricing starts at $52,500.
"The FXT Series is a milestone in the evolution of storage products with its dynamic use of storage media to maximize speed while minimizing cost," said Ron Bianchini, co-founder and CEO of Avere Systems. "The end-result is a product line that can deliver tremendous business value to customers by providing high performance and high efficiency to the storage network simultaneously."
About Avere Systems
Avere provides Demand-Driven Storage(TM) solutions that dynamically organize data in response to business demand. The Avere FXT series enables faster application performance at dramatically lower cost by intelligently moving active data between traditional storage devices and FXT appliances. The FXT series appliances tier data on SSD and HDD media and can be clustered for maximum scalability. www.averesystems.com Company Information: Name: Avere Systems, Inc. Address: 5000 McKnight Rd. City: Pittsburgh State: PA ZIP: 15237 Country: USA Phone: 412-635-7170 FAX: 412-635-7171 http://www.averesystems.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
