Machine Vision Camera suits medical X-ray, 3D laser profiling.
October 6, 2009 -
With image sensor optimized for sensitivity and quality, Genie(TM) HM1400-XDR (extended dynamic range) captures image data at speeds to 64 fps in full 1,400 x 1,024 resolution. GigE Vision-compliant solution acts as single machine vision component that integrates camera and board image acquisition technologies. In addition to global electronic shutter with exposure control, features include on-board flat-field correction and 1000x anti-blooming.
DALSA Introduces New Genie(TM) Camera for Medical X-Ray and 3D Laser Profiling Applications
WATERLOO, ONTARIO - August 12, 2009. DALSA Corporation (TSX: DSA), a global leader in machine vision technology, today introduced a new member to its line of affordable and easy-to-use GigE Vision-compliant cameras with the release of the Genie(TM) HM1400-XDR camera, a model with extended dynamic range (XDR). The Genie HM1400-XDR camera features a high quality, high sensitivity DALSA image sensor and is specifically designed for digital image capture in applications such as medical X-Ray and 3D laser profiling where light sensitivity is not a factor.
This new Genie camera offers unprecedented high speed image acquisition with uncompromised signal-to-noise ratio, significantly optimizing the opportunity for increased yield. The Genie HM1400-XDR camera captures image data at speeds of up to 64 fps in full resolution (1400x1024). Additional features include: global electronic shutter with exposure control and on-board flat-field correction to produce crisp and clear images. The GigE Vision camera acts as a single machine vision component-integrating both advanced camera and board image acquisition technologies in one small package.
"This Genie HM1400-XDR camera is unique in the marketplace in that the sensor is optimized in terms of both speed and resolution, enabling it to use the entire GigE bandwidth," comments Manuel Romero, Genie Product Manager at DALSA.
GigE Vision(TM)
Like all Genie cameras, the Genie HM1400-XDR is certified GigE Vision compliant, and is based on the AIA (Automated Imaging Association) GigE Vision Standard to directly link the camera to a PC. This new Genie camera takes full advantage of Gigabit Ethernet technology, transmitting data over standard CAT-5e and CAT-6 cables to distances of up to 100m allowing for a greater distance between the camera and inspection system. DALSA continues to lead the deployment of the GigE Vision standard in terms of adopting the technology into their product development efforts.
Software Advantage
The Genie HM1400-XDR camera is supported by DALSA's Sapera(TM) Essential software and its Genie Framework package for fast and simple camera set-up - from initial set-up to grabbing images in minutes. Moreover, the Genie Framework employs DALSA's advanced Trigger-to-Image Reliability engineering, significantly accelerating application development and deployment time by providing developers with a 360° view of the entire acquisition process.
Features and Benefits
Shorter development time: Genie Framework software package contains advanced tools to enable faster application integration and set up;
Trigger-to-image-reliability: Sapera LT allows monitoring of the behavior of various tasks such as: triggering, image capture and data transfer;
Ruggedized RJ45 connector: DALSA is the first vendor to use this cable connector - ideally suited for robotics applications;
Optimized speed and resolution: This model captures image data at speeds of up to 64 fps in full resolution (1400x1024), features global electronic shutter with exposure control and on-board flat-field correction.
1000x Anti-blooming: resulting from DALSA's proprietary CMOS technology.
DALSA's Genie family of cameras is easy-to-use and affordable. For more information on other models in the Genie camera family, please visit the Genie cameras product page. For a full resolution picture of a DALSA Genie camera, please visit DALSA's online media kit.
About DALSA's Machine Vision Products and Services
For more than 25 years DALSA has led the design, manufacture and deployment of digital imaging components for the machine vision OEM market, and now offers Vision Appliances for factory floor deployment. Today, DALSA image sensors, cameras, frame grabbers, software, and Vision Appliances are used in thousands of automated inspection systems around the world and across multiple industries including semiconductor, flat panel display, electronics, automotive, medical, packaging and general manufacturing.
About DALSA Corporation
DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees worldwide. Established in 1980, the company designs, develops, manufactures and markets digital imaging products and solutions, in addition to providing semiconductor products and services. DALSA's core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing. Products and services include image sensor components (CCD and CMOS); electronic digital cameras; vision processors; image processing software; and semiconductor wafer foundry services for use in MEMS, high-voltage semiconductors, image sensors and mixed-signal CMOS chips. DALSA is listed on the Toronto Stock Exchange under the symbol "DSA" and has its corporate offices in Waterloo, Ontario, Canada.
DALSA Expands Genie Family of Affordable and Easy-to-Use Cameras with the Introduction of the Genie HM1400-XDR Company Information: Name: DALSA Address: 605 McMurray Rd. City: Waterloo State: ON ZIP: N2V2E9 Country: Canada Phone: 978-670-2000 FAX: 519-886-8023 http://www.dalsa.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
