Cabling System features pre-terminated, Category 6 design.
September 28, 2009 -
Ideal for installation in data centers and office environments, Belden 3600 Pre-terminated Cabling System offers bandwidth of 280 MHz. Braided sleeve and pulling eyes provide protection when pulling and routing assemblies through overhead trays, raised floors, cabinet poke-throughs, and cable management hardware. Available in 6-cable bundles in 1 ft increments from 6-50 ft long and in 5 ft increments from 55-295 ft long, system includes CAT6+ RJ45 Modular Couplers.
Belden 3600 Pre-Terminated 'Green' Cabling System Reduces Installation Time and Costs, Provides Reliable Category 6 Performance
RICHMOND, Ind., Sept. 21 / / - Belden (NYSE:BDC), a world leader in the development of signal transmission products for the enterprise, industrial, building management, broadcast, and security markets, introduces the new Belden 3600 Pre-Terminated Cabling System. Belden's eco-friendly Pre-Term Made Easy(TM) cabling solution delivers robust and reliable Category 6 performance, making it ideal for installation in data centers and office environments.
The 3600 Pre-Terminated Cabling System is easy and convenient to configure and install. It can reduce installation time and labor costs by as much as 90 percent. Since all system components are factory-tested, there is no need for the extensive testing and troubleshooting typically required in cabling installations. In addition, this "green" system provides for plug-and-play installation and component reusability, resulting in lower cost and less waste. The system is fully supported under Belden's IBDN 3600 Certification Program, including guaranteed bandwidth of 280 MHz and Belden's 25-Year IBDN Product Warranty.
At the heart of Belden's 3600 Pre-Terminated Cabling System are the following core components:
- 3600 Pre-Terminated Cable Assemblies - small, flexible cable assembly
design, combined with RJ45 plugs, allows for fast, easy installation
and termination. The use of a braided sleeve and pulling eyes
provides additional protection when pulling and routing the assemblies
through overhead trays, raised floors, cabinet poke-throughs and cable
management hardware.
The cable assemblies come in standardized 6-cable bundles. Each 23 AWG 4-pair cable features Belden's patented Bonded-Pair technology to ensure Category 6 performance and reliability, before and after installation. The assemblies are available in 1-ft increments from 6-50 ft assembly lengths, and in 5-ft increments from 55 to 295 ft assembly lengths. Each is labeled with a unique serial number and bar code for easier asset management.
- CAT6+ RJ45 Modular Couplers - the inherent simplicity of this
RJ45-RJ45 feed-through coupler (or inline coupler) brings modularity
and flexibility to the 3600 System, along with a new and higher level
of RJ45 plug-and-play performance. The Coupler also provides
outstanding transmission performance in short and long channels and it
is reusable and reconfigurable for both front and back patch panel
reconfiguration. And since the Coupler is compatible with Belden's
full line of KeyConnect(TM) modular patch panels, adapters and
faceplates there is no need for special installation hardware.
Also Available New KeyConnect Modular Jack Colors
Belden has also announced that its KeyConnect 10GX, CAT6+ and CAT5E Modular Jacks are now available in 17 colors. Traditionally these jacks were available in TIA 606 matching colors as well as Gray, White, Almond and Black. The new colors include Ivory, and darker versions of Orange, Red, Yellow, Green, Blue and Purple. Belden KeyConnect Jacks can be used in Belden's 10GX, KeyConnect and AngleFlex(TM) Patch Panels, as well as Belden KeyConnect and MediaFlex Workstation Outlets.
For more information about the Belden 3600 Pre-Terminated Cabling System, request New Product Bulletin #304. Contact Belden at P.O. Box 1980, Richmond, Indiana 47375, 1.800.BELDEN.1. FAX: 765.983.5294. Or visit our Web site: www.belden.com.
About Belden
Belden is a customer focused company. We ensure that our customers' communications infrastructure issues are resolved and that they benefit from the best signal transmission performance for their investment. We deliver leading-edge copper and fiber cabling/connectivity systems, wireless technologies, and active switch devices. We employ customer-centric go-to-market strategies and we implement and retain world class manufacturing processes. Our partners span the globe, helping our customers design, install, operate and maintain their communications applications. And our experience is vast, including expertise in Enterprise, Industrial, Infrastructure, Transportation, Professional and Enterprise Audio and Video, and Government applications. To obtain additional information contact Investor Relations at 314-854-8054, or visit our website at www.belden.com.
Public Relations:
Adventive Marketing, Inc.
Janet Killen
USA
Phone: 847-590-1110 Company Information: Name: Belden Address: 2200 US Hwy. 27 S. City: Richmond State: IN ZIP: 47375 Country: USA Phone: 800.235.3364 FAX: 765-983-5294 http://www.belden.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
