August 19, 2009 -
Offering response time as fast as 8 ms, low-profile EZ-SCREEN® LP provides 14 or 25 mm resolution, defined areas from 270-1,810 mm, and detection ranges up to 7 m. First and last beams of unit are positioned at ends of light screen, delivering continuous detection along entire length and eliminating dead zones. Interconnection of cascade sensors has been optimized, allowing up to 4 sensor pairs and Emergency Stop or interlocking guard switches to be connected at end sensor.
DELIVERS LOW-PROFILE DESIGN AND CONTINUOUS DETECTION ACROSS ENTIRE SCREEN LENGTH
Minneapolis, MN-August 6, 2009- Banner Engineering Corp. has expanded its EZ-SCREEN® family of safety light screens to include low-profile models, which pair a space-saving footprint-ideal for safeguarding of smaller machines-with reliable performance suited even for large power presses. The first and last beams of the new EZ-SCREEN Low Profile (LP) are positioned at the ends of the light screen, delivering continuous detection along the entire light screen length and eliminating the dead zones found on traditional safety light curtains.
"In many safeguarding applications, space can be limited," said Mike Carlson, Technical Manager for Banner's Safety Products. "In these cases, the safety light screen might need to be positioned within the frame of the machine. With traditional safety light curtains, this would result in a gap, or dead zone, in the opening of the machine that could lead to a hazardous situation." Carlson added, "The EZ-SCREEN LP solves this problem with a compact 28 x 26 mm housing and end-to-end sensing, while maximizing ease of installation and flexibility."
The EZ-SCREEN LP offers exceptional versatility with 14 or 25 mm resolution models, defined areas from 270 to 1810 mm and detection ranges up to 7 m with excellent excess gain to solve a variety of application needs. The interconnection of cascade sensors has also been optimized with no big cable loops, allowing up to four sensor pairs and an Emergency Stop or interlocking guard switches to be connected at the end sensor. Also, there are models with nickel-plated housing for ESD-safe applications, clear anodized aluminum housing or "safety" yellow powder-coat housing.
The mounting scheme includes brackets for end or side mounting with no dead zone, both styles included with each sensor. Additional mounting options include a "Universal" adapter bracket for mounting to slotted framing, a solution for mounting the sensor inside tubular framing such as P1000 Unistrut®, and fixed or pivoting angle brackets to make installation of cascade sensors quick and easy.
The EZ-SCREEN LP offers the high performance and convenient features expected of EZ-SCREEN safety light screens, including simple alignment and setup, flexible wiring to allow emitters and receivers to be used interchangeably, easily configured reduced resolution and fixed blanking, and cascading. Blocked beams are identified using zone indicators, and a 7-segment display shows diagnostic information and number of blocked beams.
Applications. The EZ-SCREEN LP delivers reliable safeguarding in a wide range of applications, including:
Small assembly equipment
Pick-and-place machines
Power and molding presses
Palletizers and packaging machinery
Roll formers
Automated production equipment
Lean and robotic work cells
These features of the EZ-SCREEN LP make it particularly useful in the above applications:
14 or 25 mm resolution models
Defined areas from 270 to 1810 mm with detection ranges up to 7 m
Response times as fast as 8 milliseconds
Exceeds OSHA/ANSI Control Reliability requirements, certified to cULus NIPF, and CE certified to Type 4, Category 4 PLe and SIL 3
Simple, two-piece integrated design
Convenient setup without a PC, disassembly or additional devices
Easily configured reduced resolution and fixed blanking
Two solid-state safety outputs (500 mA each); includes selectable trip/latch output
User configurable auxiliary output at 250 mA
Learn more about the EZ-SCREEN LP Safety Light Screens.
About Banner. Banner Engineering is the world's leading manufacturer of electronic machine guarding systems, photoelectric and ultrasonic sensors, vision sensors, wireless networks, fiber optic assemblies and precision measurement systems.
For further information, contact Banner Engineering Corp., 9714 Tenth Avenue North, Minneapolis, MN 55441. PH: 888.373.6767 (Toll-free North America), or 001.763.544.3164 (International). FAX: 763.544.3213. Email: mailto:sensors@bannerengineering.com. E-commerce: http://www.bannerengineering.com/buyonline Web: http://www.bannerengineering.com Company Information: Name: Banner Engineering Corp. Address: 9714 Tenth Ave. N. City: Minneapolis State: MN ZIP: 55441 Country: USA Phone: 763-544-3164 FAX: 763-544-3213 http://www.bannerengineering.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
