FMC Mezzanine Cards support Xilinx Virtex-6 FPGAs.
August 11, 2009 -
FPGA Mezzanine Card (FMC/VITA 57) modules include 3 GSps, 8-bit, dual-channel ADC512 as well as 1.5 GSps, 8-bit, 4-channel ADC513, which both support up to 1,500 MSps data throughput per channel. Products eliminate data bottlenecks by supporting bandwidths in excess of 6 B/s with direct, low-latency connections to host FPGAs, including Xilinx® Virtex®-6 FPGAs. Air- and conduction-cooled versions are available for rugged deployed embedded applications.
New FMC (FPGA Mezzanine Card) Analog-to-Digital Converter (ADC) Mezzanine Cards Support New Xilinx Virtex-6 FPGAs
High Wycombe, UK - June 24, 2009 -- Curtiss-Wright Controls Embedded Computing, a leading designer and manufacturer of commercial off-the-shelf (COTS) VME, VPX, VXS, and CompactPCI products for the aerospace and defense (A&D) market, today announced support for the new Xilinx® Virtex®-6 FPGAs and targeted design platforms via its family of high sampling rate, high bandwidth FPGA Mezzanine Card (FMC/VITA 57) modules. These include the new ADC512, a 3GS/s 8-bit, dual channel analog-to-digital converter (ADC) card, and new quad channel ADC513, a 1.5 GS/s 8-bit, analog-to-digital converter (ADC) card, able to support up to 1,500MS/s data throughput per channel. These new FMC cards eliminate data bottlenecks by supporting bandwidths in excess of 6B/s with direct low latency connections to host FPGAs such as a Virtex-6. This helps system designers optimize and increase DSP subsystem performance.
The Curtiss-Wright Controls FMC cards enable system designers to optimize the performance of Virtex-6-based digital signal processing (DSP) subsystems. The high-speed ADC I/O are routed directly to the Virtex-6 FPGAs on the host board via the FMC connector to eliminate data bottlenecks and increase performance.
"Our new high-bandwidth ADC512 and ADC513 FMC modules deliver dedicated I/O for advanced FPGAs and enables system developers to take full advantage of Xilinx's next generation Virtex-6 FPGAs and targeted design platforms," said Lynn Patterson, vice president and general manager of Modular Solutions, Curtiss-Wright Controls Embedded Computing. "Our growing family of FMC FPGA I/O mezzanine cards significantly speeds and simplifies the use of FPGAs in rugged deployed embedded applications."
"The integration of industry-standard FMC modules is a key element of Xilinx's targeted design platform strategy, and allows us to go to market with a simplified offering of base boards and daughter-card extensions for our Virtex-6 base platform," said Raj Seelam, senior marketing manager of Platform Solutions at Xilinx. "Curtiss-Wright Controls has fully embraced this approach, and their support of Virtex-6 FPGAs with the new ADC512 and ADC513 FMC modules ensures that our mutual customers can meet the performance requirements of the most demanding embedded and DSP applications."
Available in both air-cooled and conduction-cooled rugged versions, the ADC512 and ADC513 are designed for use in demanding reconfigurable computing applications, such as direct RF down-conversion, SigInt/Surveillance, Satellite communications and SDR. They speed and simplify the integration of FPGAs into rugged deployed embedded system designs.
About FMC (VITA 57)
FMC modules enable I/O devices that reside on an industry standard (VITA 57) mezzanine card to be attached to, and directly controlled by FPGAs that reside on a host board. About half the size of a PMC module, FMCs provide a small footprint, reduced I/O bottleneck, increased flexibility, and reduced cost through the elimination of redundant interfaces. To maximize data throughput and minimize latency, the FMC connector provides numerous I/O pins that support high-speed signals for moving data between the FMC and the FPGA.
For more information on the ADC512 click here. For more information on the ADC513 click here.
Inquiries: Please forward all Sales and reader service inquiries to Jerri-Lynne Charbonneau, Curtiss-Wright Controls Embedded Computing, Tel: (613) 254-5112; Fax: (613) 599-7777; e-mail: sales@cwcembedded.com.
About Curtiss-Wright Controls Embedded Computing
Curtiss-Wright Controls Embedded Computing is the industry's most comprehensive and experienced single source for embedded solutions, ranging from Processing, Subsystems, Data Communication, DSP, and Video & Graphics to the most advanced board level components and fully integrated custom systems. The Embedded Computing group serves the defense, aerospace, commercial and industrial markets and is part of Curtiss-Wright Controls Inc.
About Curtiss-Wright Controls, Inc.
Headquartered in Charlotte, North Carolina, Curtiss-Wright Controls is the motion control segment of Curtiss-Wright Corporation (NYSE: CW). With manufacturing facilities around the world, Curtiss-Wright Controls is a leading technology-based organization providing niche motion control products, subsystems and services internationally for the aerospace and defense markets. For more information, visit www.cwcontrols.com.
Note: All trademarks are property of their respective owners.
Contacts:
General Information:
Jerri-Lynne Charbonneau
USA
Phone: 613-254-5112
FAX: 613-599-7777 E-mail this person Company Information: Name: Curtiss-Wright Controls Embedded Computing Address: 741-G Miller Drive, SE City: Leesburg State: VA ZIP: 20175 Country: USA Phone: 703-779-7800 FAX: 703-779-7805 http://www.cwcembedded.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
