June 24, 2009 -
Model 2891-IQ Upconverter processes analog I and Q baseband signals for testing transceiver's transmitter and also processes output signals for testing its receiver. Able to interface with RF transceivers with single-ended or differential inputs, it provides EVM floor of 41 dB to optimize modulation measurements. Unit's gain adjustments interface with various wireless chipsets and devices. Compact system is controlled via USB connection and programmed with simplified SCPI command set.
New Upconverter Supports Transceiver Test, Simplifies Test System Design
Cleveland, Ohio - June 9, 2009 - Keithley Instruments, Inc. (NYSE: KEI), a world leader in advanced electrical test instruments and systems, introduces the Model 2891-IQ Upconverter, which provides comprehensive support for transceiver testing by processing analog I and Q baseband signals for testing a transceiver's transmitter, as well as processing analog I and Q output signals for testing a transceiver's receiver. To learn more about Keithley's Model 2891-IQ, visit http://keithley.acrobat.com/p28202891/.
The Model 2891-IQ converts single-ended baseband analog I and Q signals from a signal generator into differential output signals to provide input signals for testing transceivers with differential baseband I,Q inputs. On the receiver side, it converts the receiver's down-converted differential I and Q signals into a modulated, up-converted signal for receiver performance testing by an RF signal analyzer. It speeds and simplifies designing transceiver test systems because it interfaces easily with both RF transceivers and with Keithley's Series 2900 RF Vector Signal Generators and Series 2800 RF Vector Signal Analyzers.
The combination of the Model 2891-IQ with the Model 2920 Vector Signal Generator and the Model 2820A Vector Signal Analyzer makes it easy to create a small, simple, and cost-effective RF transceiver test system. The Model 2891-IQ contains gain adjustments so that it can interface with a wide variety of wireless chipsets and devices. Furthermore, the Model 2891-IQ can interface with RF transceivers with either single-ended or differential inputs. Its EVM floor of 41dB, even for wideband 40MHz-bandwidth 802.11n signals, makes it possible to use the Model 2891-IQ when making high quality modulation measurements.
This instrument's compact size makes it ideal for locating it close to the wireless device under test (DUT), which helps minimize loading, even on high impedance devices, and maximizes signal bandwidth. Similarly, the selectable 50(TM)/100k(TM) input impedance of the Model 2891-IQ's inputs allows it to connect to high impedance devices with minimal signal loss. The instrument's high performance IQ modulator provides excellent signal fidelity, allowing the DUT's receiver signals to be measured without noise floor or spurious signal interference from the instrument itself. For example, the Model 2891-IQ's sideband suppression is less than 51dBc.
The instrument is controlled through a USB connection and programmed with a simplified SCPI command set. An easy-to-use software control panel provides intuitive access to these commands. Signal differential offsets may be set and adjusted and modulator gain set. A non-volatile EEPROM allows storing and recalling ten user instrument states.
The Model 2891-IQ will be introduced to the wireless test market at the International Microwave Symposium (IMS), the world's premier microwave conference. In 2009, the IEEE Microwave Theory and Techniques Society (MTT-S) International Microwave Symposium 2009 (IMS 2009) will be held in Boston, Massachusetts, as the centerpiece of Microwave Week 2009, scheduled from June 7 through June 12.
Price and Availability
The price of the Model 2891-IQ Upconverter is $5,000 USD. Orders are being taken now for delivery in 10 weeks.
For More Information
For more information on the new Model 2891-IQ Upconverter or any of Keithley's other RF/wireless test solutions, visit http://www.keithley.com/products/rfmi... or contact the company at:
With more than 60 years of measurement expertise, Keithley Instruments has become a world leader in advanced electrical test instruments and systems from DC to RF (radio frequency). Our customers are scientists and engineers in the worldwide electronics industry involved with advanced materials research, semiconductor device development and fabrication, and the production of end products such as portable wireless devices. The value we provide them is a combination of products for their critical measurement needs and a rich understanding of their applications to improve the quality of their products and reduce their cost of test.
Products and company names listed are trademarks or trade names of their respective companies.
Contacts:
General Information:
Ellen Modock
USA
Phone: 440-498-2746 E-mail this person Company Information: Name: Keithley Instruments, Inc. Address: 28775 Aurora Rd. City: Cleveland State: OH ZIP: 44139 1891 Country: USA Phone: 800-552-1115 FAX: 440-248-6168 http://www.keithley.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
