Battery Charger Controllers require no blocking diode.
June 11, 2009 -
Supporting multiple battery chemistries, Model LTC4012 offers adjustable battery termination voltage, while Models LTC4012-1 and LTC4012-2 utilize programmable internal resistor divider to charge from 1-4 series Lithium cells at multiples of 4.1 and 4.2 V, respectively. PWM units operate at input voltages from 5-28 V with output voltage of 2-28 V and programmable charge current to 4 A. Synchronously rectified, buck switching topology enables efficiencies greater than 90% at 3 A.
4A Multicell/Chemistry Battery Charger Controllers in Compact 16mm2 Package Require No Blocking Diode
MILPITAS, CA - June 8, 2009 - Linear Technology Corporation introduces the LTC4012, LTC4012-1 and LTC4012-2, fast-charge 4A capable high efficiency switchmode battery charger controllers for multiple battery chemistries. The LTC4012 supports Li-Ion/Polymer, NiMH, NiCd and sealed lead acid battery chemistries in single and multicell configurations. The LTC4012 offers an adjustable battery termination voltage, while the LTC4012-1 and LTC4012-2 utilize a programmable internal resistor divider to charge from 1 to 4 series Lithium cells at multiples of 4.1V and 4.2V, respectively. All devices feature a wide output voltage range of 2V to 28V. The devices' analog INFET control means there is no need for an external blocking diode at the power input, thereby increasing efficiency and reducing the solution footprint. Also, AC adapter current limiting maximizes the charge rate for a given fixed input power level, allowing the end-product to operate at the same time the battery is charging without complex load management algorithms. The ICs operate at input voltages from 5V to 28V and are intended for applications including portable computers, portable instruments, and battery backup systems.
The LTC4012/-1/-2's synchronously rectified, buck switching topology drives all n-channel MOSFETs and enables efficiencies >90% at 3A. Final float voltage accuracy is specified at ±0.5% and charge current is programmable with an accuracy of ±4%. The ICs quasi-constant frequency PWM architecture guarantees no audible noise operation and minimizes filtering needs, while the high 550kHz operating frequency allows the use of small inductors and capacitors. Improved non-overlap control keeps efficiency high as external power FET turn-on/off times may vary with temperature and supplier.
The LTC4012/-1/-2 consumes <30uA without a DC power input, increasing battery run time in portable applications. For safety and autonomous charge control, the ICs include battery float voltage over-voltage protection, reverse charge current protection, charge current monitoring, soft start, AC adapter present indication, and current limit indication.
The LTC4012/-1/-2 are housed in a compact 20-lead, low-profile (0.75mm) 4mm x 4mm QFN package. They are guaranteed for operation from 0°C to 85°C ambient temperature.
Pricing starts at $3.15 for the LTC4012 and $3.25 each for the LTC4012-1 and LTC4012-2 each in 1,000-piece quantities. For more information, visit www.linear.com.
Summary of Features:
LTC4012, LTC4012-1, LTC4012-2
High Efficiency PWM Switchmode Battery Charger Controller
Multiple Battery Chemistries & Multi-Cell
Configurations Supported:
o Li-Ion/Polymer, NiMH, NiCd, SLA, Supercaps
o Li-Ion/Polymer 1 to 4 Cell: 4.1V, 8.2V, 12.3V, 16.4V (LTC4012-1)
o Li-Ion/Polymer 1 to 4 Cell:4.2V, 8.4V, 12.6V, 16.8V (LTC4012-2)
Programmable Charge Current up to 4A: ±4% Accuracy
Analog INFET Control Eliminates Need for External Blocking Diode
550kHz Switching Frequency Enables Small
External Components
±0.5% Output Float Voltage Accuracy
Wide Input Supply Voltage Range: 6V to 28V
Wide Output Battery Voltage Range: 2V to 28V
No Audible Noise with Ceramic Capacitors
Synchronous Rectification: High Efficiency >90% @ 3A
Enhanced Non-Overlap Control of External Power FETs
Indicator Outputs for AC Adapter Present, Charging, C/10 Current Detection and Input Current Limiting
Analog Charge Current Monitor
Micropower Shutdown
Compact, Low-Profile (0.75mm) 4mm x 4mm QFN-20 Package
4A Multichemistry Switchmode Battery Chargers with Analog INFET Control
About Linear Technology
Linear Technology Corporation, a manufacturer of high performance linear integrated circuits, was founded in 1981, became a public company in 1986 and joined the S&P 500 index of major public companies in 2000. Linear Technology products include high performance amplifiers, comparators, voltage references, monolithic filters, linear regulators, DC-DC converters, battery chargers, data converters, communications interface circuits, RF signal conditioning circuits, µModule® products, and many other analog functions. Applications for Linear Technology's high performance circuits include telecommunications, cellular telephones, networking products such as optical switches, notebook and desktop computers, computer peripherals, video/multimedia, industrial instrumentation, security monitoring devices, high-end consumer products such as digital cameras and MP3 players, complex medical devices, automotive electronics, factory automation, process control, and military and space systems.
LT, LTC, LTM, Burst Mode, and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.
Worldwide Contacts
North America and General Information
John Hamburger
Tel: (408) 432-1900 ext. 2419
jhamburger@linear.com
Doug Dickinson
Tel: (408) 432 1900 ext. 2233
ddickinson@linear.com
Contacts:
Marketing:
John Hamburger
USA
Phone: 408-432-1900 ext 2419 E-mail this person
General Information:
Doug Dickinson
USA
Phone: 408-432-1900 ext 2233 E-mail this person Company Information: Name: Linear Technology Corp. Address: 1630 McCarthy Blvd. City: Milpitas State: CA ZIP: 95035-7417 Country: USA Phone: 408-432-1900 FAX: 408-434-6441 http://www.linear-tech.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
