May 22, 2009 -
Equipped with one 16-bit A/D converter per channel, MSXB 081 Signal Interface Module monitors signals simultaneously from up to eight 4-20 mA current loops. Device provides both 300 V of isolation from channel to channel and 700 V from channel to PC. Users can acquire data from as many modules as needed by connecting them to DAP boards in networked DAPservers. System is then controlled from any PC on network using DAPstudio or third-party Windows software.
Channel-to-Channel Isolation for 4-20 mA Current Loops Signal Interface (SI) Module Samples Simultaneously
Bellevue, WA, May 6, 2009 - A new signal interface (SI) module lets you monitor signals simultaneously from up to eight 4-20 mA current loops, with channel-to-channel isolation. SI module MSXB 081 - new from Microstar Laboratories, Inc., maker of Data Acquisition Processor (DAP) boards and network-ready DAPservers - has one 16-bit A/D converter per channel to let you acquire signals simultaneously. MSXB 081 provides both 300 volts (peak) of isolation from channel to channel and 700 volts (peak) from channel to PC.
Each DAPserver contains up to four DAPs, and each DAP communicates with, configures, and controls each of up to eight SI modules connected to it. A system consists of any number of networked DAPservers, and includes as many SI modules as your application requires.
Signal Interfacing
SI modules like MSXB 081 fit into a backplane in a standard industrial enclosure as do other products that conform to the hardware specifications of the Microstar Laboratories channel architecture: signal connectors on 3U (100mm high) Eurocard B (220mm deep) boards - Eurocards - that often pre-process a signal. Signals connect to a DB37 male connector or to Wago connectors. A backplane connector on each board connects it to a digital backplane factory-fitted into the industrial enclosure. An interface board that also plugs into the backplane sends digitized waveforms to a DAP board controlled from a PC or DAPserver. Each DAPserver includes a 10-slot Eurocard cage with a preinstalled digital backplane for SI modules like MSXB 081. Separate industrial enclosures are required only when this 10-slot limit is exceeded.
Other SI Modules
If your application requires voltage inputs and outputs as well as 4-20 mA current inputs, you can choose from SI modules for analog input, analog output, analog input and output, and digital input and output. The SI designation is reserved for MSXB products that are intelligent: those that a DAP can communicate with and configure. All new MSXB products are SI modules. The full range of SI modules and earlier MSXB products is described on the company Web site, arranged in these eight function groups:
simple termination
simple multiplexing
anti-alias filtering
simultaneous sampling
isolation
counter/timer
quadrature-decoder
signal conditioning
SI modules all include the level of isolation required to prevent ground loops. Using these boards saves you from having to take other steps against this common nuisance. If spurious currents are corrupting your signals, your application is not doing the job you want it to do.
DAP boards make a robust platform for high-performance data acquisition and control systems. PCs and rack-mountable DAPservers each can contain - and control - more than one DAP. Every DAP includes an onboard processor running a real-time operating system. Windows applications that support DLL calls can control a DAP by communicating with this onboard operating system. You can control a DAP from DAPstudio - a Windows application from Microstar Laboratories - as well as from third-party (or your own) software, and you can do this from any PC on a network. For smaller systems, you can hook up a single DAPserver to any PC with an Ethernet connection. You also can work directly on the DAPserver: add a screen, and connect a keyboard and mouse to the front-panel USB ports.
Conclusion and Next Step
If you need to monitor any number of 4-20 mA current loops - sampled simultaneously - and you want channel-to-channel isolation with the convenience of a network-ready Windows solution, check out the new signal interface (SI) module, part number MSXB 081, from Microstar Laboratories.
This 8-channel SI module is designed to scale up to however many current loops you may need to monitor. It lets you take advantage of the field-proven data acquisition and control systems that the company has manufactured since 1982 ... with continuous improvement over more than a quarter-century.
You can install MSXB 081 SI modules in an industrial enclosure and connect them to a DAP board you control from a PC, or you can install them directly into a DAPserver that contains one or more DAPs. You control DAP boards by using DAPstudio - or other Windows software - on any PC or DAPserver on a network. You can download a full version of DAPstudio to try it out. To try out all its features, you will need a DAP board. The company provides evaluation hardware at no charge. You can order MSXB 081 SI modules at
US$1395 each for immediate delivery.
Microstar Laboratories, Inc. claims Microstar Laboratories, Data Acquisition Processor, DAP, DAPserver, and DAPstudio as trademarks.
Microsoft Corporation has registered Microsoft and Windows as trademarks.
National Instruments Corporation has registered LabVIEW as a trademark.
Other organizations may claim - or may have registered - as trademarks any trade names, logos, and service marks that appear in this document but not in the list above.
Microstar Laboratories makes it a practice to use an appropriate symbol at the first occurrence of a trademark or registered trademark name in a document, or to include trademark statements like this with the document. Company Information: Name: Microstar Laboratories, Inc. Address: 2265 116th Ave. NE City: Bellevue State: WA ZIP: 98004-3039 Country: USA Phone: 888-678-2752 FAX: 425-453-3199 http://www.mstarlabs.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
