March 11, 2009 -
Designed to attach directly to permanent magnet DC motors up to 1/6 hp, TightDrive(TM) offers 20:1 speed range with max output of 90 V. Variable speed SCR drive is housed in aluminum extrusion, which offers NEMA1/IP30 protection and heat dissipation. Three accessible adjustable potentiometers provide settings for minimum RPM, maximum RPM, and current limiting. Intended for 115 V 50/60 Hz operation, unit comes with 3 ft power cord and NEMA 5-15P plug.
Bison Gear Introduces New TightDrive(TM) Motor-Mounted Speed Control
Compact, multi-featured variable speed SCR drive attaches directly to permanent magnet DC electric motors and gearmotors to conserve energy while offering tighter speed regulation.
St. Charles, IL - February 26, 2009 - Bison Gear's new TightDrive(TM) speed control for permanent magnet DC (PMDC) motors was designed for applications that require a convenient location for the control ... on the motor! The majority of PMDC gearmotors and motors used in industry today require speed controls in order to operate. Typically, the control is wired to the motor through a costly, complicated cable system and the motor and control can be many steps away from each other. Bison's voice of the customer research brought forth the need for a convenient "point of use" motor speed control that was robust for industrial environments, while offering practical features and exceptional value.
Bison Gear & Engineering's new TightDrive(TM) motor-mounted speed control can be easily field mounted on Bison PMDC gearmotors up to 1/6 horsepower (124 watts) and offers a 20:1 speed range with maximum output of 90 Volts. The TightDrive(TM) is housed in a durable aluminum extrusion which offers NEMA 1 (IP 30) protection and superior heat dissipation. Speed is controlled with a combination on/off switch and speed potentiometer. In addition, three easily accessible adjustable potentiometers provide settings for minimum RPM, maximum RPM, and current limiting. The simple, yet innovative, SCR control architecture also provides much tighter speed regulation than alternative controls.
"Simple solutions are often the best," said Matt Hanson, Bison Gear vice president, portfolio management. "The new TightDrive(TM) enables machine builders to put the control, the power and the gearmotor more conveniently at the point of use, while saving installation time and reducing costs. As a bonus, users can maximize energy savings by easily changing speeds as requirements change."
The TightDrive(TM) is designed for 115 volt 50/60 Hz operation and comes complete with three foot power cord and NEMA 5-15P plug. Users can mount the drive directly to the motor in 90° increments to optimize position of cord exit and motor leads. The new TightDrive(TM) speed controls are available for immediate shipment from Bison's distribution network or direct from the Bison Gear web site.
Like all of Bison's gearmotor products, the TightDrive(TM) speed controls are American made to Bison's high quality standards in order to ensure reliable, long-life operation and direct supply chain fulfillment from Bison's modern St. Charles, Illinois facilities. In addition, Bison's Innopreneurial(TM) application and design engineering capabilities to customize or adapt these controls to meet specific OEM needs are readily available.
About Bison Gear & Engineering Corp.
Founded in 1960, Bison Gear & Engineering Corp. designs and manufactures fractional horsepower electric motors, gearmotors and gear reducers used in industrial and commercial OEM applications worldwide. Bison's strong engineering tradition, based on Robusticity(TM) principles, offers products with up to twice as much torque in the same package size as competitors. The Bison Gear team of nearly 270 associates is headquartered in its St. Charles, Illinois facility which produces gearmotors and reducers in parallel shaft and right angle configurations, as well as AC and DC electric motors, for applications where dependability and long lifetimes are important. www.BisonGear.com
CONTACT:
Brenda Thiessen, Marketing Supervisor
Bison Gear & Engineering Corp.
Phone 1-630-443-5797
bthiessen@bisongear.com
Contacts:
Marketing:
Brenda Thiessen Marketing Supervisor
USA
Phone: 630-443-5797 E-mail this person Company Information: Name: Bison Gear & Engineering Corp. Address: 3850 Ohio Ave. City: St. Charles State: IL ZIP: 60174 Country: USA Phone: 800-AT-BISON FAX: 630-377-6777 http://www.bisongear.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
