Gear Cutting Machines do not use any fluids for processing.
December 3, 2008 -
Able to process workpieces with ODs up to 150 mm, SE15A gear shaping machine employs counterbalancing shafts that reduce vibration and noise for stable machining at max speed of 2,000 spindle strokes/min. Gear hobbing machine, GE25A, is equipped with gear-tooth chamfering device and achieves cycle time of 40 sec. It can machine workpieces with up to 250 mm ODs at speeds of 250 m/min. Both machines come with software for setting conditions and graphic display of operating status.
MHI to Unveil 2 High-speed, Fully "Dry-Cut" Gear Cutting Machines: "SE15A" Gear Shaping Machine for Small-size Workpiece Processing and "GE25A" 40 Sec. Cycle-Time Gear Hobbing Machine with Chamfering Device
Tokyo, October 20, 2008 - Mitsubishi Heavy Industries, Ltd. (MHI) will unveil two newly developed "dry-cut" type gear cutting machines - systems not using any cutting fluid for processing - at the 24th Japan International Machine Tool Fair (JIMTOF 2008) to take place at Tokyo Big Sight from October 30 through November 4. The "SE15A," which can process workpieces up to 150 millimeters in outside diameter, will be added to the company's "SE" series of dry-cut gear shaping machines. The new "GE25A," a gear hobbing machine, will become available with a newly added chamfering device.
SE15A Gear Shaping Machine
The SE15A, which enables high-speed processing of small-size workpieces, will be available in two types with different peripheral device arrangements - a stand-alone type and a production line configuration type - to meet the customer's specific production environment.
The SE15A, a fully "dry-cut" type unit that does not require cutting oil to reduce wear of the cutting tool or cleaning of the tool and workpiece during the cutting process, produces no oil mist or waste oil, and as a result contributes to a clean working environment while also addressing environmental demands. The machine also eliminates electricity normally needed for cutting oil-related devices such as the oil circulation pump and cutting oil cooler, thereby enabling a 20% saving in energy compared with the SD15CNC, the existing "wet-cut" machine for small-size workpiece machining.
Featuring counterbalancing shafts optimally arranged within the gear train of the machine's drive system, the SE15A greatly reduces vibration and noise and enables stable machining at a maximum high speed of 2,000 spindle strokes per minute, about 50% faster than the current model. Together with a new machine design that requires roughly 18% less installation space than the SD15CNC, the SE15A facilitates easy configuration of production lines through modularized peripheral equipment and a conveyor system. Easy and simple operation software for setting the machining conditions and graphic display of the machine's operating status further enhance this model's operability and ease of maintenance.
New GE25A Hobbing Machine
The new GE25A, based on the current GE25A system, is now equipped with a gear-tooth chamfering device. In customer's preference, the new machine is also available with a new hob introduced earlier this month, which uses Dry Cut III thin-film coating technology. Through these refinements, the new GE25A achieves a high-speed cycle time of 40 seconds for a final reduction gear of passenger cars together with highly precise hobbing capability. The elimination of chamfering after the hobbing machine, which has been required for the previous GE25A model, enables more compact gear cutting lines.
The GE25A is capable of totally dry-cut machining of workpieces up to 250 millimeters in outside diameter, such as final reduction gears of automobiles, at a high speed of 250 meters per minute with high accuracy conforming to Japanese Industrial Standards (JIS) N8 grade standards. This is achieved by increasing the number of index points of the ring loader for automatic workpiece shifting to four, doubled from the previous model. The four-position ring loader moves the hobbed workpiece to the next index point of the chamfering station. By integrating the chamfering and hobbing processes, productivity is enhanced and a more compact gear cutting line becomes possible. For improvement of the working environment, workpiece machining is conducted within a fully enclosed unit to prevent machining chips from scattering. As with the SE15A, the new GE25A is equipped with easy, simple operation software.
Going forward, along with further expansion of its dry-cut gearing cutting machine portfolio, MHI will introduce additional Dry Cut III tools, which have greatly enhanced wear resistance compared with existing tools, to provide customers with gear cutting systems incorporating both dry-cut machines and tools. The company will vigorously conduct marketing activities for this portfolio in a quest to respond flexibly to all customer needs and production environments.
Main Specifications of SE15A Gear Shaping Machine
Maximum workpiece diameter (millimeters: mm):
External gear: 150
Internal gear: 60 + cutter diameter
Maximum module: 4
Maximum workpiece width (mm): 32
Spindle stroke speed (stokes/minute): 400 - 2,000
Radial travel (mm): -30 - 195
Radial rapid traverse (mm/minute): 10,000
Cutter spindle diameter (mm): 90
Table diameter (mm): 260
Main motor output (kW): 7.5
Total power consumption (kVA): 31
Installation space (mm): Type I *: 1,780 x 2,300
Installation space (mm): Type II*: 1,690 (narrowest front: 1,280) x 2,700
Machine weight (kg) 5,500
*Type I: Standard stand-alone type. Type II: Narrow width to fit in production line configuration.
Main Specifications of GE25A Gear Hobbing Machine with Chamfering Device
Maximum workpiece diameter (mm): 250
Maximum module: 6
Maximum hob size (mm, diameter x length): 130 x 230
Chamfering cutter diameter (mm): 110
Total power consumption (kVA): 52
Installation space (mm): 2,170 x 2,770
Machine weight (kg): 9,900 Company Information: Name: Mitsubishi Heavy Industries America Address: 600 Cherry Fork Ave. City: Leetonia State: OH ZIP: 44431 Country: USA Phone: 330-427-8900 FAX: 330-427-8909 http://www.mhi.co.jp
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
