Digitizers are available in bandwidths up to 1 GHz.
November 7, 2008 -
Models NI PXI-5153 and NI PCI-5153, 500 MHz, and NI PCI-5154, 1 GHz modules feature up to 256 MB onboard memory/channel, sustaining up to 2 GS/sec real-time sampling rates over extended data capture windows. T-Clock technology synchronizes multiple instruments and allows users to integrate units with various hardware. Users can build systems with up to 34 channels in single PXI chassis, all simultaneously sampling at 1 GS/sec, and systems work with all National Instruments software.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
National Instruments Expands High-Speed Digitizer Product Line
With 10X Higher Measurement Throughput, New Digitizers Offer High-Speed Measurement Capability Optimized for Automated Test
AUSTIN, Texas, Oct. 27, 2008 / / - National Instruments (NASDAQ:NATI) today announced the expansion of its digitizer product line with the introduction of three new digitizers/PC-based oscilloscopes. The 500 MHz NI PXI-5153 and NI PCI-5153 and the 1 GHz NI PCI-5154 modules round out the NI 515x series of digitizers, following the introduction of the NI PXI-5154 in July. With the NI 515x series, engineers can take advantage of a complete line of high-speed digitizers - with 300 MHz, 500 MHz and 1 GHz bandwidths - for demanding automated test and streaming applications where high-bandwidth measurements are required.
All three new products feature up to 256 MB of deep onboard memory per channel, providing accurate measurements by sustaining up to 2 GS/s real-time sampling rates over extended data capture windows. Engineers can use these digitizers to address a wide range of measurement needs in the consumer electronics, semiconductor, aerospace and defense and life sciences industries.
"High-bandwidth measurements are a complicated and expensive part of any automated test system," said Ray Morgan, senior product engineer at ON Semiconductor. "With the 1 GHz PXI-5154 digitizer and the 2.7 GHz PXI-2547 8x1 high-frequency multiplexer, we created a low-cost 16-channel oscilloscope. The 1 GHz digitizer in the modular format has helped us test our new high-bandwidth products at a fraction of our previous test times."
NI 515x digitizers are the first high-bandwidth digitizers on the market with three characteristics that make them optimized for automated test - tight synchronization between channels, ease of integration with other instrumentation and high data throughput. Using T-Clock technology, which synchronizes multiple instruments and was patented by National Instruments, engineers can integrate NI 515x digitizers with a variety of NI hardware, including arbitrary waveform generators and digital waveform generator/analyzers, to customize and build a complete, automated mixed-signal test system. Engineers also can synchronize multiple digitizers to build systems with up to 34 channels in a single PXI chassis, all simultaneously sampling at 1 GS/s and synchronized to picosecond-level accuracy between modules.
The PXI platform, upon which NI high-speed digitizers are built, provides measurement throughput up to 10 times faster than alternative instrument architectures because of the high-bandwidth and low-latency PCI bus. The digitizers' high bandwidth, fast data throughput and tight multi-module synchronization are particularly beneficial for applications including mass spectrometry, radar, signal intelligence, non-destructive test and high-channel-count physics experimentation.
Engineers can combine the new digitizers with NI LabVIEW SignalExpress interactive measurement software to quickly acquire data, perform measurements and view and analyze data in Microsoft Excel or NI DIAdem test management software. Additionally, the NI 515x digitizers work with all National Instruments software including the NI LabVIEW graphical system design platform and the NI LabWindows(TM)/CVI ANSI C development environment as well as other development environments such as ANSI C, Microsoft C++ and Visual Basic.
National Instruments (www.ni.com) is transforming the way engineers and scientists design, prototype and deploy systems for measurement, automation and embedded applications. NI empowers customers with off-the-shelf software such as NI LabVIEW and modular cost-effective hardware, and sells to a broad base of more than 25,000 different companies worldwide, with no one customer representing more than 3 percent of revenue and no one industry representing more than 10 percent of revenue. Headquartered in Austin, Texas, NI has more than 4,800 employees and direct operations in nearly 40 countries. For the past nine years, FORTUNE magazine has named NI one of the 100 best companies to work for in America. Readers can obtain investment information from the company's investor relations department by calling (512) 683-5090, e-mailing nati@ni.com or visiting www.ni.com/nati.
CVI, DIAdem, LabVIEW, National Instruments, NI, ni.com and SignalExpress are trademarks of National Instruments. The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other product and company names listed are trademarks or trade names of their respective companies.
Source: National Instruments
CONTACT: Ernest Martinez, 1-800-258-7022, of National Instruments
General Information:
Ernest Martinez
USA
Phone: 800-258-7022 Company Information: Name: National Instruments Corp. Address: 11500 North Mopac Expwy. City: Austin State: TX ZIP: 78759-3504 Country: USA Phone: 888-217-7186 FAX: 512-683-8411 http://www.ni.com/
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
