October 31, 2008 -
Installed as integrated subsystem of ShMM-500R Shelf Manager, IntegralHPI(TM) enables Hardware Platform Interface (HPI) accessibility to fully loaded AdvancedTCAŽ (ATCA) shelf. It preserves binary interface for OpenHPI client applications, tightly integrating its operation with Shelf Manager. Leveraging Shelf Manager's redundancy architecture, product deliver HPI service that is un-interrupted across Shelf Manager switchovers.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Pigeon Point Systems Unveils Breakthrough Integrated HPI for Leading ATCA Shelf Manager
IntegralHPI(TM) Delivers Greater Than 20x Performance Improvement for ATCA System Managers
MOUNTAIN VIEW, Calif., Oct. 20 -- Pigeon Point Systems, the leading provider of TCA management components and a wholly owned subsidiary of Actel Corporation (NASDAQ:ACTL), today introduced its new IntegralHPI(TM), an innovative implementation of the Hardware Platform Interface (HPI) that can be installed as an integrated subsystem of the company's market-leading Shelf Manager. Tested last month at the PICMG TCA Interoperability Workshop (TCA-IW) in Straubenhardt, Germany, IntegralHPI was shown to enable HPI accessibility to a fully loaded AdvancedTCA(R) (ATCA) shelf within seconds after startup, minimizing the time until manageability for high-functionality shelves.
"Enea included the Pigeon Point OpenHPI in version 2.0 of the Enea Accelerator Platform, an industry-proven, off-the-shelf software foundation for the development of carrier-grade next generation equipment. The dramatic improvements the new IntegralHPI from Pigeon Point can offer would further strengthen our next-generation platforms, especially in the initial discovery time for large ATCA shelf configurations," said Terry Pearson, vice president of marketing at Enea. "With the preservation of the binary interface for OpenHPI client applications and support for redundancy, IntegralHPI is a very attractive alternative to existing solutions."
The HPI is emerging as a strongly favored foundation layer among major Network Equipment Providers for management layers that monitor systems based on ATCA and other types of hardware platforms. Defined by the Service Availability Forum (SAF), the HPI provides an abstracted interface for managing computer hardware, including bladed shelf/chassis architectures, such as ATCA and IBM BladeCenter.
"Our tier one Network Equipment Provider customers and their suppliers are increasingly focused on using HPI as the foundation interface for management access to their ATCA shelves, so it makes sense for us to add HPI as a native interface of the market-leading Pigeon Point Shelf Manager," said Mark Overgaard, president of Pigeon Point. "IntegralHPI preserves the gains in robustness and specification compliance that have already been delivered to those customers in Pigeon Point OpenHPI, but in a significantly more efficient implementation and with other advancements, such as inherent support for redundancy."
IntegralHPI is supported on the large memory configuration of the market-leading Pigeon Point ShMM-500R Shelf Manager that manages the majority of the world's ATCA shelves. As a subsystem of the Shelf Manager, IntegralHPI provides substantial improvements over Pigeon Point's OpenHPI, an optimized distribution of an external open-source HPI implementation. By tightly integrating its operation with the Shelf Manager, IntegralHPI is dramatically more efficient, with initial startup times for richly populated ATCA shelves that ranged from 29x to 53x faster than the Pigeon Point OpenHPI solution with less than half the memory requirements.
In addition, IntegralHPI leverages the Shelf Manager's proven redundancy architecture to deliver an HPI service that is un-interrupted across Shelf Manager switchovers. IntegralHPI also directly reuses source code from the Pigeon Point OpenHPI product, especially for the numerous additional sensors and controls that are required by the SAF's HPI-to-ATCA mapping specification. In addition, IntegralHPI preserves the binary interface used by OpenHPI client applications to access the HPI service, simplifying the transition to IntegralHPI for current OpenHPI users.
Availability
The new IntegralHPI is delivered on a subscription basis and will be available in Q4 2008. Technical support is provided by Pigeon Point's ATCA and HPI experts.
About Pigeon Point Systems
Pigeon Point Systems, a wholly owned subsidiary of Actel Corporation, delivers world-class management components for modular platforms based on the AdvancedTCA(R), AdvancedMC(TM) and MicroTCA(TM) architectures to leading companies worldwide. Pigeon Point's focus on providing dependable, proven solutions for the mandatory management controllers in these architectures allows customers to concentrate on the value-add aspects of their products. Deep expertise on these architectures ensures compliance and interoperability in the Pigeon Point components.
Pigeon Point, an executive member of PICMG, is a leader in its AdvancedTCA, AdvancedMC and MicroTCA subcommittees and is active in many other technical subcommittees. Pigeon Point is also a contributing member of the Service Availability(TM) Forum and a leader in its HPI Working Group. For more information about Pigeon Point Systems, please visit http://www.pigeonpoint.com/ or http://www.actel.com/.
The Pigeon Point name and the stylized lighthouse logo, as well as the IntegralHPI name and logo, are trademarks of Pigeon Point Systems. The Actel name and logo are trademarks of Actel Corporation.
CONTACT: Anna del Rosario of Actel Corporation, newsroom@actel.com
Contacts:
General Information:
Anna del Rosario
USA E-mail this person Company Information: Name: Pigeon Point Systems Address: P.O. Box 66989 City: Scotts Valley State: CA ZIP: 95067 6989 Country: USA Phone: 831-438-1565 FAX: 831-438-3709 http://www.pigeonpoint.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
