October 15, 2008 -
Designed for maintenance specialists who keep automation and process plant equipment operational, Fluke Color ScopeMeter® 225C (200 MHz, 2.5 GS/s) and 215C (100 MHz, 1 GS/s) verify electrical integrity of bus and network by performing physical layer tests. They perform signal validation of all critical signal parameters, such as amplitude and noise, and have floating and fully isolated inputs for true differential signal measurements on 2-wire differential bus systems.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
New Fluke Color ScopeMeter® Test Tool Makes Fieldbus Testing Easy with Bus Health Test Feature
Everett, Wash. - Fluke Corporation, the global leader in handheld electronic test and measurement equipment, introduces two new models to its range of Fluke Color ScopeMeter® Test Tools with automated test capability for Fieldbus, Profi Bus and other industrial communication protocols. The new models, the Fluke ScopeMeter 225C (200 MHz, 2.5 GS/s) and 215C (100 MHz, 1 GS/s), include all the features of the market-leading Fluke 199C and 196C Color ScopeMeters.
The Fluke 225C and 215C ScopeMeter Test Tools are designed for maintenance specialists who keep automation and process plant equipment operational. Today's plants and industrial facilities are installing digital networking systems to improve efficiencies, gather management data and improve quality. These systems often operate in harsh environments requiring special techniques and tools for maintenance and troubleshooting, including verification of electrical signal quality on industrial buses such as Fieldbus Foundation, CAN-bus (or DeviceNet), Profi, RS-485, ModBus, ASI and more. The new instruments feature easy signal validation of all the critical signal parameters like amplitude and noise, and have floating and fully isolated inputs for true differential signal measurements on 2 wire differential bus systems. They allow users to verify the electrical integrity of bus and network, performing "physical layer tests" and getting answers quickly and easily.
Bus Health Test
Bus Health Test analyzes the electrical signals on the industrial bus or network and gives a clear "good", "weak" or "bad" validation mark for each relevant parameter, next to the actual measured value. Measured values are compared to standard values based on the bus type selected, or personal reference values if users require different tolerances.
The Fluke 225C and 215C ScopeMeter Test Tools can validate the signal quality as soon as electrical signals are passed along the network, without looking at data content. They help in finding errors like improper cable connections, bad contacts, incorrect grounding and missing or superfluous terminators.
Floating, independently isolated input channels
The independently isolated input channels and the floating inputs mean that the Fluke ScopeMeter Test Tools can take truly floating differential measurements from balanced 2-wire systems like RS-485 and CAN. One input channel can measure the voltage between the two signal wires, and at the same time the other can independently measure the common mode voltage over ground.
The large color screen shows the individual parameters with validation, the actual measured value, the minimum and maximum values recorded over time, and the reference values used for the validation. The choice of parameters differs with the bus type and may include bias voltage, signal high- and low-levels, rise- and fall-times, in-band and out-band noise levels, jitter, pulse width, baudrate, and more.
Activity indicators tell users that the data flow is ongoing, and stop flashing the moment communication comes to a halt. In the eye-pattern mode, a waveform display is built over successive signal passes to give a visual indication of overall signal quality, noise levels and signal jitter.
All Fluke ScopeMeter Test Tools allow users to perform basic electrical tests like copper resistance and isolation on an electrical system or a cable. They also have extensive network signal analysis capabilities. The isolated channel structure gives excellent immunity to common mode noise and disturbances, and can measure common mode voltages separately.
Like all members of the Fluke Color ScopeMeter Test Tool family, the 190C series (including the 225C and 215C) includes a wide range of test capabilities that make these instruments the signal analysis tool of choice for engineers working on electronic and electrical systems. The instruments include FFT analysis for identifying individual frequency components contained in a signal. The TrendPlot paperless recording function helps uncover long-term trends and shows changes in any of the measurable parameters (like the risetime of a signal). The ScopeRecord function allows waveform recordings to be made for up to 48 hours and the 'Replay' function enables the user to take a closer look at any anomaly seen flashing by on screen, by re-playing the last sequence of 100 screen images.
The Fluke Color ScopeMeter Test Tools are available immediately. For more information on Fluke ScopeMeter Test Tools, visit www.fluke.com, or contact Fluke Corporation, PO Box 9090, Everett, WA USA 98206, call (888) 308-5277, fax (425) 446-5116 or e-mail fluke-info@fluke.com.
Fluke Corporation
Fluke Corporation is the world leader in compact, professional electronic test tools. Fluke customers are technicians, engineers, electricians and metrologists who install, troubleshoot, and manage industrial electrical and electronic equipment and calibration processes for quality control.
Contacts:
Marketing:
Larry Wilson Public Relations Manager
USA
Phone: 425-446-5671 E-mail this person Company Information: Name: Fluke Corp. Address: 6920 Seaway Blvd. City: Everett State: WA ZIP: 98203 Country: USA Phone: 800-44-FLUKE FAX: 425-446-5116 http://www.fluke.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
