Automotive LVDS Crosspoint Devices are AEC-Q100 certified.
September 3, 2008 -
Automotive-grade PowerWise® products include three 2 x 2 crosspoint switches, one set of single and dual differential drivers and receivers, as well as dual-line driver and receiver pair. Using LVDS common-mode and differential technology, they deliver optimal signal integrity and noise immunity at data transmission rates up to 3.125 Gbps while consuming as little as 105 mW of power per channel. Each product is AEC-Q100 Grade 3 certified and operate up to 85°C.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
National Semiconductor Introduces Industry's First AEC-Q100 Compliant LVDS Crosspoint Switches, Drivers and Receivers
PowerWise LVDS Crosspoints Deliver Industry's Best Signal Integrity for Automotive Infotainment, GPS Navigation and Imaging Systems
SANTA CLARA, Calif. - August 27, 2008 - National Semiconductor Corp. (NYSE:NSM) today announced a new family of automotive-grade low-voltage differential signaling (LVDS) 2 x 2 crosspoint switches that deliver the industry's best signal integrity and noise immunity at data transmission rates up to 3.125 Gbps. These PowerWise® crosspoints, which consume as little as 105 mW of power per channel, combine with National's line drivers and receivers to reduce power consumption and heat dissipation in a wide range of automotive applications including infotainment, instrument cluster displays, GPS navigation, and backup and lane departure camera warning systems.
National's LVDS family has been characterized and qualified to meet the certification requirements of the AEC-Q100 standard as defined by the Automotive Electronics Council. LVDS is a robust differential signaling technology that's well-suited for automotive applications. It provides low power operation and high bandwidth, yet generates very little electromagnetic interference (EMI). Additionally, the wide LVDS common-mode and differential technology deliver exceptional noise immunity. This combination of low noise (EMI) generation and high noise immunity is critical as electronic systems continue to proliferate throughout the automobile in areas such as ignition, power-train management, infotainment and safety.
The eight new LVDS devices include three 2 x 2 crosspoint switches, a set of single and dual differential drivers and receivers, and a dual line driver and receiver pair. Each device is AEC-Q100 Grade 3 certified and guaranteed to operate up to 85 degrees C:
o The PowerWise DS25CP102Q 2 x 2 LVDS crosspoint switch delivers the industry's best jitter performance (6 ps typical) at data transmission rates up to 3.125 Gbps. The device features selectable transmit pre-emphasis and receive equalization to extend signal transmission reach in cables and FR-4 backplanes. It's supplied in a 16-pin LLP® package. For more information or to order samples and an evaluation board, visit www.national.com/pf/DS/DS25CP102Q.html.
o The PowerWise DS25CP152Q 2 x 2 LVDS crosspoint switch, without signal conditioning, also offers industry-leading jitter performance at data transmission rates up to 3.125 Gbps. It's supplied in a 16-pin LLP package. For more information or to order samples and an evaluation board, visit www.national.com/pf/DS/DS25CP152Q.html.
o The DS10CP152Q 2 x 2 LVDS crosspoint switch, without signal conditioning, provides lower speed (1.5 Gbps) data transmission operation. It's supplied in a 16-pin LLP package. For more information or to order samples and an evaluation board, visit www.national.com/pf/DS/DS10CP152Q.html.
o The DS90LV011AQ LVDS differential line driver and DS90LT012AQ LVDS differential line receiver both support switching rates up to 400 Mbps (200 MHz). Both devices are supplied in 5-pin SOT-23 packages. For more information or to order samples, visit www.national.com/pf/DS/DS90LV011AQ.html and www.national.com/pf/DS/DS90LT012AQ.html.
o The DS90LV027AQ LVDS dual differential line driver supports switching rates up to 600 Mbps (300 MHz), while the DS90LV028AQ LVDS dual differential line receiver and DS90LV049Q LVDS dual line driver and receiver pair each support switching rates up to 400 Mbps (200 MHz). The DS90LV027AQ and DS90LV028AQ are supplied in 8-pin SOIC packages and the DS90LV049Q is supplied in a 16-pin TSSOP package. For more information or to order samples, visit www.national.com/pf/DS/DS90LV027AQ.html, www.national.com/pf/DS/DS90LV028AQ.html and www.national.com/pf/DS/DS90LV049Q.html.
About National's LVDS Portfolio
National Semiconductor's LVDS technology is a low-power, low-noise method for high-speed data transmission over copper interconnects. LVDS solves current and future high-performance data transmission challenges in bandwidth-hungry applications by delivering data at gigabits per second at milliwatts of power. National is the world's largest supplier of high-speed LVDS products, according to Databean's 2007 Analog IC Market Share survey. National's LVDS products include interface line drivers and receivers, LVDS-LVDS signal conditioners, LVDS-LVDS switching/multiplexing/repeating functions, LVDS serializer/deserializers, FPD link display solutions and ADCs with high-speed digital interfaces. For more information on National's LVDS products, visit www.national.com/LVDS.
Pricing and Availability
Available now in 1,000-unit quantities, the DS25CP102Q with signal conditioning, DS25CP152Q without signal conditioning and lower speed DS10CP152Q without signal conditioning are priced at $6.54, $5.46 and $4.29, respectively. The DS90LV011AQ / DS90LT012AQ driver / receiver pair is priced at $1.16. The DS90LV027AQ / DS90LV028AQ dual driver / receiver pair is priced at $2.08 and the DS90LV049Q LVDS dual driver and receiver pair is priced at $1.02.
About National Semiconductor
National Semiconductor creates energy-efficient analog and mixed-signal semiconductors. Its PowerWise® products enable systems that consume less power, extend battery life, and generate less heat. Headquartered in Santa Clara, Calif., National reported sales of $1.89 billion for fiscal 2008 which ended May 25, 2008. Additional company and product information is available at www.national.com.
Contacts:
Marketing:
Mark Alden PR Manager
USA
Phone: 408-721-6929 E-mail this person Company Information: Name: National Semiconductor Corp. Address: 2900 Semiconductor Dr. City: Santa Clara State: CA ZIP: 95051-0695 Country: USA Phone: 800-272-9959 FAX: 408-739-9803 http://www.national.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
