Vortex Shedding Flowmeters feature 316 SS construction.
September 2, 2008 -
Offered in ¾, 1, 1½, and 2 in. pipe sizes, CoolPoint(TM) stainless steel flowmeters measure and monitor corrosive fluids and water with chemicals added. Maximum 4-20 mA transmitter flow rates are 25, 50, 100, and 200 gpm, respectively. Featuring PVDF sensors and Viton® fluoroelastomer seals as standard, electronic meters have no moving parts to stick or coat, eliminating potential for clogging. Units provide ±2% full-scale accuracy and repeatability of ±.25% of indicated flow.
Universal Flow Monitors Expands Line of Stainless Steel Coolpoint(TM) Flowmeters
Universal Flow Monitors, Inc. introduces four new sizes of stainless steel CoolPoint(TM) vortex shedding flowmeters for corrosion resistance in processing cooling water, water/glycol coolant or low-viscosity fluids.
CoolPoint(TM) flowmeters of 316 SS construction are now offered in 3/4 inch, 1 inch, 1 1/2 inch and 2 inch pipe sizes for measuring and monitoring higher flows of corrosive fluids and water with chemicals added. The vortex shedding flowmeters with 316 SS bodies also continue to be available in 1/4 inch and 1/2 inch pipe sizes.
Stainless steel CoolPoint(TM) flowmeters provide flow consistency as a result of their +/-2 percent full-scale accuracy and high repeatability (+/-.25 percent of indicated flow). They are electronic meters that have no moving parts to stick or coat, eliminating potential for clogging.
Maximum 4-20 mA transmitter flow rates for the new stainless steel CoolPoint(TM) pipe sizes are: 3/4 inch, 25 gallons per minute (95 liters per minute); 1 inch, 50 GPM (190 LPM); 1 1/2 inch, 100 GPM (380 LPM); and 2 inch, 200 GPM (750 LPM).
All four of the new, larger sized CoolPoint(TM) 316 SS flowmeters can be equipped with a temperature transmitter for flow applications involving heat removal. In addition to measuring flow rate, meters with the transmitter have the added capability of monitoring temperature readings and transmitting them to a process controller.
CoolPoint(TM) stainless steel flowmeters feature polyvinylidene fluoride (PVDF) sensors and Viton® fluoroelastomer seals as standard equipment. Meters with the 316 SS bodies can be equipped with Kalrez® perfluoroelastomer seals for added reliability in harsh chemical environments.
A flow totalizer is available on the new CoolPoint(TM) stainless steel units to increase their ability to measure, monitor and control the total amount of water used in a process. The optional flow totalizer features a pulse output, reset button and six-digit LED in either liters or gallons.
Flow turndown of 20:1 is also an option on the 3/4 inch through 2 inch pipe sizes, up from 10:1 turndown as standard. The increased turndown ratio improves user capability to detect, read and record low flows, an advantage in batching and in standardizing on a single flowmeter model for multiple applications.
Universal Flow Monitors, Inc., located in Hazel Park, Mich., has manufactured flowmeters for a variety of industries for more than 20 years. The company can be reached at (248) 542-9635 or at www.flowmeters.com.
Flowmeters.com visitors can access product literature for the CoolPoint(TM) 3/4 inch through 2 inch pipe sizes, as well as for other CoolPoint(TM) sizes, by scrolling to "Water Flow Meter" on the homepage.
Viton® and Kalrez® are registered trademarks of DuPont Performance Elastomers, Wilmington, DE.
Contact Email: tma1995@tmaapr.com
Contact Information:
(866) 542 - 9641
(248) 398 - 4274 (Fax)
FlowMeters.Com
1755 East Nine Mile Road
P.O. Box 249
Hazel Park, MI 48030 Company Information: Name: Universal Flow Monitors, Inc. Address: 1795 E. 9 Mile Rd. City: Hazel Park State: MI ZIP: 48030 Country: USA Phone: 800-394-9636 FAX: 248-398-4274 http://www.flowmeters.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
