Flow Sharing Control increases hydraulic system dynamics.
July 31, 2008 -
Electrohydraulic Flow Matching (EFM) control generates adjusting signals for pump at same time valves are controlled, ensuring adequate flow is made available. Promoting accelerated response to implement hydraulics, solution is operated in open control chain as electro-proportional variable pump. Pressure losses between pump and valve adjust themselves according to operating point.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Rexroth's Electrohydraulic Flow Matching Increases the Dynamics of Hydraulic Systems Equipped with a Load-Sensing Pump
Rexroth's Electrohydraulic Flow Matching provides better dynamics and improved energy usage
Rexroth presents next generation of flow-sharing controls: Electrohydraulic Flow Matching (EFM) for better dynamics, improved energy usage in certain machine operating states, and improved toughness in control technology.
(Bethlehem, PA - www.boschrexroth-us.com) In conventional flow-sharing (LUDV) systems, the pump controls the supply pressure of the valve control via a hydraulic-mechanical mode. Consequently, the pump reacts to every change of pressure made by consumers. The electrohydraulic flow matching (EFM) system replaces this pressure control loop with a new kind of control. The EFM control generates the adjusting signals for the pump at the same time the valves are controlled, thereby ensuring that adequate flow is made available.
With this system, the implement hydraulics react a lot faster to the user's commands and are therefore easier to operate.
EFM also improves the extent to which energy is utilized, namely in the machine's operating states in which the hydraulic consumers' demand for flow is smaller than the pump's maximum flow capacity. Thus, as long as the maximum capacity of the implement hydraulics is not reached, the EFM saves energy by up to 10 percent, depending on the operating point. This savings is based on the fact that the pressure losses between pump and valve adjust themselves according to the operating point. Because of this, they are smaller than the losses created by the hydraulic-mechanical flow-sharing (LUDV) solutions due to rigidly adjusted pressure surpluses.
EFM also achieves an improved toughness in closed loop technology. Particularly in critical operating points such as fast changes in set-point values or serious changes in load pressure, this toughness has a positive effect due to a decreased vibration tendency. This advantage is achieved by EEM because the pump in the EFM system is no longer operated in the pressure control loop, but instead in an open control chain as an electro-proportional variable pump. Consequently, fewer breakdowns and mutual influences caused by various consumers occur. This also contributes to the machine's improved ease of use, thereby making the user's task easier.
The EFM system is based on Rexroth components that include a variable pump with an electrohydraulic pilot control, such as the A10VO, an electronic joystick (e.g. from the Rexroth THE series), an electrohydraulic load-sensing valve (e.g. SX14NGE or M7), as well as a BODAS controller (for instance the RC36-20) with the expanded BODAS VAC (valve control) software to which the specific EFM function has been added.
Bosch Rexroth AG, part of the Bosch Group, achieved sales of approximately $7.4 billion (5.4 billion Euros) in 2007 with nearly 33,000 employees. Under the brand name of Rexroth the company offers all drive and control technologies, from mechanics, hydraulics and pneumatics to electronics and associated service. Over 500,000 customers worldwide utilize Rexroth's unique technological know-how to implement their innovative and future-oriented systems and machine concepts. The global player, represented in over 80 countries, is an extensive supplier of components and systems for industrial and factory automation and mobile applications. Visit www.boschrexroth-us.com for more information.
Please Send Any Reader Inquiries To:
Eric Deist
Account Coordinator - Lead Management Services
MarketSense
681 Commerce Street
Burr Ridge, IL 60527
Phone: (630) 654-0170, ext. 115
Fax: (630) 654-0302
edeist@market-sense.com
Contacts:
Public Relations:
MarketSense
Eric Deist Account Coordinator - Lead Management Services
681 Commerce Street
Burr Ridge IL 60527
USA
Phone: 630-654-0170 ext 115
FAX: 630-654-0302 E-mail this person Company Information: Name: Bosch Rexroth Corp., Industrial Hydraulics Div. Address: P.O. Box 2407, 2315 City Line Rd. City: Bethlehem State: PA ZIP: 18017 Country: USA Phone: http://www.boschrexroth-us.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
