June 6, 2008 - Mounted through outer wall of shielded enclosure, Series FCP power line penetration filters are RFI-secure and supplied with threaded nipple. Products are supplied with bleeder resistors to prevent shock hazards and can withstand 140% of rated current for 15 min without any deterioration. Providing specified insertion loss of 100 db min over indicated frequency range, series filters from 60-400 Hz with 100 db attenuation from 14 KHz to 10 GHz and 100 KHz to 10GHz.

(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

See related product stories
	Power Inlet Filters operate at 60 Amps.
	Inductor-Based EMI Filters suit mobile/wireless handsets.
	EMI/ESD Filter Arrays feature less than 1 dB input loss.
	Line Filters suppress EMI in high frequency applications.
	Common Mode Choke EMI Filter integrates ESD protection.

See more product news in:
	Communication Systems and Equipment
	Electrical Equipment and Systems
	Electronic Components and Devices

Tools for you
del.icio.us	DIGG
Facebook	Reddit
StumbleUpon	Twitter
Print This Page	E-Mail Story
Watch_Company	Save Story
View Company Profile
Company web site
More news from this company

More Tools and information

Search for suppliers of

Radio Frequency Interference (RFI) Filters

Power Line Filters

Interference Filters

Military EMI/RFI Filters

EMI/RFI Filters

Electronic Filters

Join the forum discussion at:

Tools of the Trade

Wired In

Newsletters

Your Gateway to a Fast Changing World Product News Alerts
	Receive similar stories and other customized news to keep you in the know on the products shaping industry.
	Subscribe Free Today Subscribe View Sample

Industry Market Trends Has Got It
Latest developments Trends Best practices Opinions & Commentary
Get Ahead. Get IMT. Subscribe Free Today Subscribe View Sample

See more related product stories:
	Power Filters are offered in DIN rail-mount versions.
	RF Dielectric Filters are designed for W-CDMA amplifiers.
	Module filters EMI and suppresses transients.
	EMI Filters are offered in single- and three-phase versions.
	RF Noise Canceller IC boosts signal strength.
	EMI/RFI Filters protect high-res LCD screens in 3G phones.
	IEC Inlet Filters are offered in high attenuation versions.
	Interference Filters are designed for laser applications.
	EMI Filter Plates feature epoxy potting and pin protector.
	EMI Filter supports 10 high-speed data lines.
	Power Filter and Connection Kit is NEC compliant.
	Power Line Filters feature panel mounting option.
	Power Filter offers surge protection and noise filtering.
	Flexible Lead EMI Filters come in bolt and broadband versions.
	Active Power Quality Filters are microprocessor controlled.
	Compact Power Line Filters feature slide-in mounting.
	EMI Filter has 15-100 V range.
	Common Mode Filter suppresses EMI on DisplayPort interfaces.
	DC Front End Module comes in 2.28 x 2.2 x 0.5 in. package.
	EMI Filter Adapters come with 9, 15, 25, or 37 pins.

Electronic RF Filters for Shielded Enclosures

Fil-Coil's EMI/RFI filters are available with more than 25 years of design and manufacturing expertise. Quality EMI/RFI filters are provided fault-free to the electronics industry. A wide range of off-the-shelf noise interference filters are available. Fil-Coil announces a breakthrough in the Power Line penetration filters with the FCP filters available in four series.

This FCP series of Power Line penetration electronic filters can be mounted through the outer wall of a shielded enclosure. The filters are RFI secure and are supplied with threaded nipple. To prevent shock hazards, filters are supplied with bleeder resistors. Series FCP filters from 60 Hz to 400Hz with 100db attenuation from 14 KHz to 10 GHz, and 100KHz to 10GHz; measured per MIL-STD-220A full load. The filters shall be capable of withstanding 140% of rated current for 15 minutes without any deterioration. Plus the filters shall provide the specified insertion loss of 100db minimum over its indicated frequency range when measured in accordance with MIL-STD-220A.

Fil-Coil's EMI RFI filter range provides an off-the-shelf solution for the vast majority of electronic equipment noise problems. Our standard product range is particularly wide, embracing both chassis-mounting and PCB-mounting types, allowing users to select an optimal choice in both performance and cost efficiency terms. Our product line includes Power Line filters, RF Power Line penetration filters, RFI/EMI filters and tubular design filters from 40dB to 80dB.

Fil-Coil, The Company With All the Solutions To All Your EMI RFI Filter Needs:
Contact the experts @ 631-467-5328, fax: 631-467-5066 or email Fil-Coil at sales@custompowersystem.com.

Company Information:
Name: Fil-Coil Filters
Address: 77-18 Windsor Place
City: Central Islip
State: NY
ZIP: 11722
Country: USA
Phone: 631-467-5328
FAX: 631-467-5066
http://www.custompowersystem.com

More New Product News from this company:
	EMI/RFI Filters meet MIL-F-15733 specification.
	EMI/RFI Filters are intended for noise generating equipment.

Brought to you by Thomasnet.com Browse ThomasNet Directory

News provided by ThomasNet News^® (TNN). TNN is a comprehensive source of new and timely product information in the industrial marketplace. TNN supplies new product information to the web sites, e-marketplaces and print publications that serve the industrial marketplace. For press release submissions please go to http://news.thomasnet.com/submitpr.html. BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE AGREEMENT.

Electronic RF Filters are designed for shielded enclosures.

Electronic RF Filters for Shielded Enclosures

Post a comment about this story