June 3, 2008 -
StrataXGS® 4 series of 65 nm switches suits OEMs designing modular, stackable, and fixed form factor equipment for service providers, data centers, and enterprise markets. Model BCM56624 is 48-port GbE + 4-port 10GbE solution with IPv4 and IPv6 routing, metro encapsulation protocols, security, and QoS features. Featuring HiGig switch fabric, BCM56720 provides one half terabit of packet switching capacity on one chip, scalable to multi-terabits of capacity on one backplane.
Broadcom Expands the Market for Merchant Switch Silicon with New StrataXGS® 4 Switching Architecture
Next Generation 65nm Switch Family Delivers High Performance, Scalable Solution Enabling a Single Hardware Platform for Enterprise, Data Center and Service Provider Networks
LAS VEGAS, April 29, 2008 -- Interop 2008 -- Broadcom Corporation (Nasdaq: BRCM), a global leader in semiconductors for wired and wireless communications, today announced the StrataXGS 4 -- the company's next generation family of single-chip 65 nanometer (nm) switches. This new product family enables OEMs to build single high-density systems that meet the cost, power, performance and scalability requirements of service provider, data center and enterprise markets using a merchant silicon solution. Broadcom's 4th generation StrataXGS architecture utilizes a low power, 65nm CMOS process technology to enable the scalability necessary for data center 3.0 applications, the security required for enterprise networks, as well as the protocols and quality of service (QoS) needed to implement next generation service provider networks.
As today's network continues to evolve, bandwidth requirements for service providers and data centers are growing at an unprecedented rate. Traditionally, equipment manufacturers have relied on custom application specific ICs (ASICs) or field programmable gate arrays (FPGAs) for their high- end networking products in these markets. This approach, however, has high development and product costs, a lengthy time-to-market, and results in a product that consumes too much power and is difficult to manage. Legacy networking technologies are being phased out in favor of a converged Ethernet- based virtualized network, and as a result, system providers are now confronted with new demands and challenges. New equipment must be developed and brought to market quickly with dramatically reduced total cost of ownership (TCO) and must retain support for critical and intricate protocols, as well as maintain high availability (HA) and advanced QoS. Broadcom is the first silicon provider to effectively address these requirements in a single high performance platform that reduces development costs and time-to-market; an accomplishment that can help to facilitate the industry transition from custom ASICs to merchant silicon.
Announced today is the Broadcom StrataXGS 4 multi-layer switch family in 65nm that includes two new products: the BCM56624 and BCM56720. A third product, the BCM56820 was announced in November 2007 and completes the product family. StrataXGS 4 products offer a new solution to OEMs designing modular, stackable and fixed form factor equipment for the service provider, data center, and enterprise markets. Using a platform approach for design flexibility, StrataXGS 4 products allow OEMs to meet the requirements of on- demand networks including the seamless migration of servers and storage subsystems across the data center, while eliminating the cost of deploying and maintaining separate, disparate fabrics such as Fibre Channel, InfiniBand and others. For service providers, the StrataXGS 4 architecture facilitates a converged network by collapsing voice, video and data onto a single IP backbone that supports both wired and wireless connectivity.
"Broadcom's next generation StrataXGS 4 architecture is unprecedented in its advancements in integration, speed, feature set and density," said Martin Lund, Vice President and General Manager of Broadcom's Network Switching line of business. "Our StrataXGS 4 products are built upon the success of three generations of field-proven StrataXGS architecture and we anticipate that they will fuel a new class of high-density systems that would benefit next generation networks, and ultimately, millions of end-users worldwide."
BCM56624: High-Density, Multi-Layer GbE Switch
The Broadcom BCM56624 is a 48-port Gigabit Ethernet (GbE) plus 4-port 10 Gigabit Ethernet (10GbE) solution that is the most scalable, feature rich 48+4 GbE switch available today. The new 65nm chip provides carrier-class features such as IPv4 and IPv6 routing, as well as advanced metro encapsulation protocols and advanced security mechanisms such as IPFix and large access control lists (ACLs) for user and flow-based authentication. The BCM56624 also includes advanced QoS features for service provider applications with a new dynamic adaptive memory buffer technology that provides better QoS and network performance. It also features large external address and security tables that scale to meet the demands of high performance equipment at the core of the network.
BCM56720: High-Density Switch Fabric
The BCM56720 is a 4th generation StrataXGS HiGig switch fabric, also designed in 65nm, that provides half a terabit of packet switching capacity on a single chip and scales to achieve multi-terabits of capacity on a single backplane. It is compatible with the new StrataXGS 4 series of products as well as products from earlier StrataXGS architectures. This switch fabric also raises the bar for stacking capability using the company's industry- leading HiGig stacking protocol and service aware flow control (SAFC) to provide OEMs with the industry's highest performance stackable solution.
Broadcom's SAFC technology is a key feature in all StrataXGS 4 products that makes it possible to build converged networks. SAFC provides reliable delivery of latency sensitive network traffic, such as storage, and extends priority access to time-critical applications including clustering, voice and video. Data center traffic can now be converged onto a single unified network fabric eliminating the need for separate networks, and results in a data center that is smaller, consumes less power and is easier to manage and cool.
BCM56820: High-Density, Low Power 10GbE Switch
Announced in November 2007, the BCM56820 is a 24-port, multi-layer 10GbE switch solution for the data center and other high performance applications. Also designed in 65nm, the BCM56820 offers significant per port power savings over previous generation 10GbE switch products, providing greater density at a lower power. This enables cooler operations for a 'green' data center, scalability for social networking and online gaming, reliability for enterprise applications and QoS for streaming video.
Green by Design
Broadcom and its foundry partners are leveraging today's most advanced lithographic node for manufacturing semiconductors. By designing solutions in 65nm process technology, Broadcom is able to provide significant environmental benefits over competitive solutions in 90nm and 130nm processes by enabling lower power consumption, smaller size and higher yields while providing higher levels of integration that result in fewer components. Additionally, Broadcom supports the current industry initiatives to remove lead (Pb) and other hazardous materials, such as halogens like bromide and chlorine, from all products. With the depth and breadth of Broadcom's advanced portfolio of market-proven IP, the company is able to drive innovative new products to market while reducing the impact on human health and the environment.
Availability and Pricing
Broadcom's StrataXGS 4 switch products, including the BCM56624, BCM56720 and BCM56820, are now sampling in volume to customers. Pricing is available upon request.
The StrataXGS 4 family is fully supported by Broadcom's widely adopted software applications programming interface (API), which is common across the entire product line and supported by multiple third-party software vendors, as well as Broadcom's FASTPATH® application layer software. Reference designs are also available to help speed time-to-market and include software, schematics, layout files and related documentation.
About Broadcom
Broadcom Corporation is a major technology innovator and global leader in semiconductors for wired and wireless communications. Broadcom products enable the delivery of voice, video, data and multimedia to and throughout the home, the office and the mobile environment. We provide the industry's broadest portfolio of state-of-the-art system-on-a-chip and software solutions to manufacturers of computing and networking equipment, digital entertainment and broadband access products, and mobile devices. These solutions support our core mission: Connecting everything®.
Broadcom is one of the world's largest fabless semiconductor companies, with 2007 revenue of $3.78 billion, and holds over 2,600 U.S. and 1,200 foreign patents, more than 7,450 additional pending patent applications, and one of the broadest intellectual property portfolios addressing both wired and wireless transmission of voice, video, data and multimedia.
Broadcom is headquartered in Irvine, Calif., and has offices and research facilities in North America, Asia and Europe. Broadcom may be contacted at +1.949.926.5000 or at www.broadcom.com. Company Information: Name: Broadcom Corp. Address: 16215 Alton Pkwy. City: Irvine State: CA ZIP: 92618 Country: USA Phone: 949-450-8700 FAX: 949-450-8710 http://www.broadcom.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
