Multi-Purpose Calibrator accommodates range of uses.
May 5, 2008 -
With stability and accuracy traceable to international standards, JOFRA AMC910 provides signal, temperature, and pressure calibrations. Additional fully isolated measurement channel allows calibration of process transmitters and signal isolators. It features 2 voltage ranges, one mA current range, one mA current range with simultaneous 24 V power, and selectable 250 W HART resistor. External PC control is possible via RS232, IEEE-488, or optional USB interface cable.
The new JOFRA AMC910 multi-purpose calibrator from AMETEK Calibration Instruments provides high precision signal, temperature and pressure calibrations. With the performance of a laboratory calibrator, an additional isolated measurement channel and optional external pressure modules, the system is ideally suited for multiple calibration requirements.
The exceptional stability and accuracy of the JOFRA AMC910 are traceable to international standards. It has applications in the calibration of dataloggers, strip chart recorders, multimeters, hand-held calibrators and other industrial instruments.
Signal calibration capabilities of the JOFRA AMC910 include, current, voltage and resistance. In temperature mode, the unit can read and source any of 11 types of thermocouples and 9 RTD types as well as YSI-400 and Ohms for non-standard curves. In pressure mode, the instrument operates with all JOFRA APM modules and covers pressure ranges from vacuum to 700 bar / 10,000 psi, selectable through more than 60 different pressure modules, representing vacuum, absolute, gauge and compound pressure types as well as all relevant pressure units with up to 0,01% Full Scale accuracy.
The additional fully isolated measurement channel effectively creates two instruments in one and allows the calibration of process transmitters and signal isolators. It features two voltage ranges, a mA current range, a mA current range with simultaneous 24 volt power and a selectable 250 ohm HART resistor. Extremely easy to use, the JOFRA AMC910 features direct keyboard entry of mode, range and value and two clear backlit displays. External PC control is possible via the RS232, IEEE-488 or optional USB interface cable.
AMC910 features:
o Superior calibration accuracy to ±0.003% of reading ±0.001% F. S.
o Source/Read 13 thermocouples, 9 RTD's, Voltage, Current, Pressure (read only)
o Custom RTD and SPRT profiles
o 9 setpoints for each output range and type
o Isolated measurement channel
- Two voltage ranges: 10V and 100 V DC
- MilliAmp range 0 to 50 mA
- MilliAmp range with simultaneous 24 VDC power
- Selectable 250 Ohm HART(TM) resistor
- Accuracy of 0.005% of reading on voltage ranges
o Pressure reference capability increases the flexibility of the instrument. Accuracies up to 0.01% using external pressure modules
o Direct keyboard entry or cursor entry with decade controlfrom keyboard
THE NEW JOFRA AMC910 REPLACES THE JOFRA AMC900
Sales & Service Offices:
AMETEK Mansfield & Green (North America)
Tel: +1 800 527 9999 o cal.info@ametek.com
Headquarter:
AMETEK Denmark A/S
Gydevang 32-34 o 3450 Aller o Denmark
Tel: +45 4816 8000 o ametek@ametek.dk
AMETEK Calibration Instruments is one of the world's leading manufacturers and developers of calibration instruments for temperature, pressure and process signals as well as for temperature sensors both from a commercial and a technological point of view.
JOFRA Temperature Instruments
Portable precision thermometers. Dry-block and liquid bath calibrators: 4 series, with more than 25 models and temperature ranges from -90° to 1205°C / -130° to 2200°F. All featuring speed, portability, accuracy and advanced documenting functions with JOFRACAL calibration software.
JOFRA Pressure Instruments
Convenient electronic systems ranging from -1 to 1000 bar (25 inHg to 14,500 psi) - multiple choices of pressure ranges, pumps and accuracies, fully temperature-compensated for problem-free and accurate field use.
JOFRA Signal Instruments
Process signal measurement and simulation for easy control loop calibration and measurement tasks - from handheld field instruments for multi or single signals to laboratory reference level bench top instruments.
JOFRA / JF Marine Instruments
A complete range of calibration equipment for temperature, pressure and signal, approved for marine use.
FP Temperature Sensors
A complete range of temperature sensors for industrial and marine use.
M&G Pressure Testers
Pneumatic floating-ball or hydraulic piston deadweight testers - easy-to-use with accuracies to 0.015% of reading.
...because calibration is a matter of confidence Company Information: Name: AMETEK Test & Calibration Instruments Address: 8600 Somerset Dr. City: Largo State: FL ZIP: 33773 Country: USA Phone: 800-527-9999 FAX: 727-539-6882 http://www.chatillon.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
