Connector and Boot simplify twisted pair terminations.
April 21, 2008 -
Model 300668SEZ Category 6 EZ-RJ45(TM) is shielded connector with 1-piece design that enables technicians to slide wire through connector and out front. Technician can pull connector over cable jacket and seat it securely in rear of connector to minimize distance between wire twists and contacts. Designed to prevent cable retraction snags, Model CBX600EZ snaggless boot provides an extended release mechanism for connector and supplementary strain relief.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Bomar Announces New Shielded Category 6 EZ-RJ45(TM) Connectors and Snagless Boots
Parts Simplify Twisted Pair Terminations While Ensuring the Integrity of High-Speed Connections
Ledgewood, NJ, April 14, 2008... Bomar Interconnect Products, Inc., a premier manufacturer and designer of quality connectors and accessories for RF, video and broadcast transmission, today announced the addition of a shielded version of their Category 6 EZ-RJ45(TM) (P/N 300668SEZ) connector, as well as a snaggless boot (P/N CBX600EZ). The EZ Series is comprised of connectors rated for CAT 5, and CAT 5e as well as CAT 6, and is specifically engineered to simplify twisted pair terminations. Its simple, one-piece design has no bars or liners, and enables technicians to simply slide the wire through the connector and out the front, making it easy to visually confirm the wiring pinout prior to crimping. To further optimize electrical performance, the technician is able to firmly pull the connector over the cable jacket and seat it securely in the rear of the connector to minimize the distance between the wire twists and contacts. The EZ Series accepts both solid and stranded wire for faster terminations with reduced scrap.
Bomar's new shielded connector exceeds the CAT 6 performance requirements per TIA/EIA-568-B when used in conjunction with a standard strain relief boot, or the new snagless boot. It is therefore ideally suited for the widest range of high-speed residential, telecommunications, and broadband communications applications where better insertion loss, near end crosstalk (NEXT), return loss and equal level far end crosstalk (ELFEXT) are required. In addition to preventing cable retraction snags, the new snagless boot provides an extended release mechanism for the connector and supplementary strain relief. The boots are installed prior to crimping and become permanently affixed to the connectors. They can be crimped with a standard tool, and then trimmed with a cutter or small utility knife, or with Bomar's crimp tool (P/N BD45000) which crimps and trims the exposed conductors in one operation to make a uniform and positive crimp. The same tool also crimps and trims Bomar's unshielded CAT 5 and CAT 5e EZ-RJ45 connectors in one cycle.
The FCC compliant, UL rated CAT 6 EZ-RJ45 features 50 micro inch gold plate. For more information on Bomar's shielded CAT 6 EZ-RJ45 connectors, visit http://www.bomarinterconnect.com/EZ%2....
Distributor pricing for Bomar's shielded CAT 6 EZ-RJ45 connectors is $2.47 each in quantities of 100; snagless boots are priced at $0.53 each in quantities of 100. Delivery is from stock.
About Bomar
Founded in 1990 Bomar Interconnect Products, Inc. (www.bomarinterconnect.com) is a premier global manufacturer and designer of quality connectors and accessories for RF, video, and broadcast transmission. The Company's significant array of standard and miniature RF connectors and modular components includes full lines of mini, twin and dual BNC, MMCX, N, RCA, SMA, SMB/SMC, TNC, and F connectors. Also offered is the Specialty Broadcast Connector (SBC and HBC) Series, together with such renowned proprietary lines as the panel-grounded X-2(TM) dual BNC Series, and V-Bite(TM) Series of edgeboard connectors. Moreover, Bomar provides extensive custom engineering services. Headquartered in Ledgewood, NJ, the Company markets its products through a worldwide network of representatives and stocking distributors. To locate a distributor, visit http://bomarinterconnect.com/./region2.html.
Contacts:
Public Relations:
A. D. Adams Advertising, Inc.
Connie Adams
USA
Phone: 201-541-3111
FAX: 201-266-0086 E-mail this person
General Information:
Bob Behrent
USA
Phone: 973-347-4040
FAX: 973-347-2111 E-mail this person Company Information: Name: Bomar Interconnect Products Address: 1850 Rte. 46 City: Ledgewood State: NJ ZIP: 07852 Country: USA Phone: 973-347-4040
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
