Digital Input Boards offer analog input capability.
March 28, 2008 -
Compatible with Cube and RACKtangle I/O chassis, Guardian Series(TM) DNA-DIO-448 and DNR-DIO-448 read all 48 bits at sustained rates in excess of 1 kS/sec. Input switching levels are software selectable from 0-28 Vdc with 25 mV resolution. Diagnostic input mode measures analog voltage at each input, allowing detection of short and open circuits as well as identifying marginal or failing drive circuitry. Analog input capability also offers installation, diagnostic, and data acquisition tool.
48-bit Digital Input Board for UEI's Cube and RACKtangle(TM) Series
Walpole, MA (March 20, 2007) - United Electronic Industries (UEI) is pleased to announce the release of the Guardian Series(TM) DNx-DIO-448 high density digital input boards. The DNA-DIO-448 and DNR-DIO-448 are compatible with UEI's popular "Cube" and RACKtangle I/O chassis respectively. The board reads all 48 bits at sustained rates in excess of 1 kS/second. Input switching levels, ( and hysterisishysteresis) are software selectable from 0 - 28 VDC with 25 mV resolution. As part of UEI's Guardian Series, the board uses an innovative A/D input approach allowing offeringthat offers incredible input flexibility. A diagnostic input mode measures the analog voltage at each input, allowing quick and accurate detection of short and open circuits as well identifying marginal or failing drive circuitry. The analog input capability is also a powerful installation, diagnostic and data acquisition tool.
Software for the DNA-DIO-448 is provided in the UEIDAQ Framework. The Framework provides a comprehensive, easy to use API that supports all popular programming and operating systems including Windows, Vista, Linux and most real-time operating systems (e.g. QNX, RTX, RT Linux). The board is fully supported by LabVIEW, MATLAB/Simulink, DASYLab or any application supporting ActiveX, OPC or Modbus TCP control.
"The DNA-DIO-448 board will allow large digital I/O systems to fit in an amazingly small package", according to UEI President Shaun Miller, "However, it's the input flexibility and diagnostic capabilities of the board that make it a truly unique product."
Pricing
DNA-DIO-448 For "Cube" chassis $1200
DNR-DIO-448 For RACKtangle chassis $1350
Delivery is 1-2 weeks
About the "Cube"
UEI's powerful "Cube" architecture is a compact (4 x 4 x 4" or 4 x 4 x 5.8") Ethernet based I/O platform. It may be deployed in five configurations: 1) Ethernet I/O slaved to a host PC, 2) Stand alone Data Logger/Recorder, 3) Linux-based Programmable Automation Controller (PAC), or 4) Simulink / RTW target, 5) Modbus TCP based I/O slave. Each Cube consists of a core module (with processor and network interface) and three or six open I/O slots. Users select the deployment option and I/O boards that meet their system requirements. With over 30 I/O boards available, there's sure to be a configuration to meet any application requirement. The six slot Cube provides up to: 150 analog inputs, 192 analog outputs, 288 digital I/O, 48 counter or quadrature channels, 72 ARINC-429 channels and/or 24 Serial or CAN-bus ports. A full description of "Cube" is available at http://www.ueidaq.com/
About the RACKtangle
The RACKtangle I/O chassis offers a similar capability as the cube, but in a more conventional, 3U rack form factor with easily replaced front-loading I/O boards. In addition, it offers 12 I/O slots and supports up to 300 A/D, 394 D/A, 576 DIO, 144 ARINC-429 or 96 CAN or Serial I/O ports. The Gigabit interface also provides two independent ports, one used for primary system control and the second used for real-time diagnostics.
About UEI
Founded in 1990, UEI is a leader in the PC/Ethernet data acquisition and control, Data Logger/Recorder and Programmable Automation Controller (PAC) markets. UEI's I/O "Cube" and RACKtangle I/O chassis are compact, rugged platforms, ideal for DAQ, Logging and control applications in the a wide assortment of applications and industries including automotive, aerospace/aviation, unmanned vehicles, appliance test, simulator control, in-vehicle test, wind and solar power system control, semiconductor manufacturing, medical equipment and more. UEI offers both COTS and customer products to OEMs, end-users and systems integrators worldwide. With analog, digital, counter, CAN-bus, Serial I/O, ARINC-429 I/O and more, UEI will have the interface you need. UEI supports all popular Windows, Vista, Linux and Real-time operating systems, programming languages and applications packages including LabVIEW, MATLAB and DASYLab.
Contacts:
General Information:
Bob Judd
USA
Phone: 508-921-4557 E-mail this person Company Information: Name: United Electronic Industries Address: 611 Neponset St. City: Canton State: MA ZIP: 02021 Country: USA Phone: 781-821-2800 FAX: 781-821-2891 http://www.ueidaq.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
