Non-Contact IR Temperature Sensor is powered via PC.
March 3, 2008 -
Connected directly to PC via included USB cable, PyroUSB operates without requiring any additional hardware interface or power supply. CalexSoft software, also included, lets users define sensor operation, set alarms and recording increments, and display readings. Able to measure temperatures from -40 to +1,000°C, this 106 mm long x 18 mm dia sensor is made of polished stainless steel, sealed to IP65, and available with choice of Germanium lenses.
Calex Launches New PyroUSB Non-Contact Infra-Red Temperature Sensor
Calex is delighted to announce the new PyroUSB Non-Contact Infra-Red Temperature Sensor.
This all-new sensor connects directly to a PC via a USB cable (included) and operates without the need for any additional hardware interface or power supply.
The CalexSoft software (also included) is simple to install and requires no specialist knowledge to set up and use. It displays temperature in numerical format and on a simulated scrolling chart. Users can set the temperature range and emissivity, compensate for reflected energy, apply filtering to fluctuating temperatures and use peak or valley-hold processing to measure hot or cold objects on conveyors. The software may also be used to record measurements at any interval from 1 second to 1 week and pre-programmed to start and finish at any time or date. Audible/visual alarms can be set to warn users that the temperature is either too high or too low. The built-in OPC Server interface allows communication between the sensor and any other equipment with OPC Client capabilities, making systems integration simple and affordable.
In addition to the USB interface, the sensor is equipped with a 2-wire, 4 to 20 mA output, which is linear with temperature. This output can be connected at the same time as the USB interface or independently. The PyroUSB sensor is capable of measuring temperatures accurately and repeatably from -40°C right up to 1000°C. If a smaller range is required this can be set using the CalexSoft software.
The sensor itself is just 106 mm long by 18 mm diameter and made of polished stainless steel, sealed to IP65, making it ideal for food and pharmaceutical applications. It is held in place by a mounting nut (included). Fixed and adjustable brackets are offered to simplify mounting and a laser-sighting tool is available to assist in the sighting of the sensor.
The high-quality Germanium lenses used by Calex produce very well defined optical paths. There are three to choose from; the first provides a field of view with a distance to spot size ratio of 15:1. There is also a lens with a 30:1 ratio and one which focuses on a 5 mm diameter spot at 100 mm distance, which is ideal for small targets such as electrical components.
If the sensor is required to operate in a very high or low ambient temperature (less than 0°C or more than 70°C) it can be ordered with a water/air-cooled jacket built around it. The temperature inside the sensor can also be monitored from the PC to make sure it doesn't exceed the ambient limits. For dusty environments, such as in paper or textile mills, an air-purge collar can be fitted to keep the lens clean.
Built-in adaptive filtering provides a very stable signal without compromising the remarkable 250 ms response time, so there is no need to sacrifice a fast response in order to achieve a stable reading.
PyroUSB sensors are RoHS compliant and conform to EN 61326-1:2006 for EMC. They are designed and built by Calex Electronics in the UK, a company with more than 30 years experience of non-contact infra-red temperature measurement.
For further information, please contact John Alderton by telephone (01525 373178/853800); fax (01525 851319) or e-mail john.alderton@calex.co.uk
Contacts:
General Information:
John Alderton
INTL
Phone: 01525-373178
FAX: 01525-851319 E-mail this person Company Information: Name: Calex Instrumentation Ltd Address: Unit 40-42, Harmill Ind.Est City: Leighton Buzzard Be ZIP: LU7 8TE Country: United Kingdom Phone: 044 (01525)853800 FAX: 044 (01525)851319 http://www.calex.co.uk
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
