Tempco Electric Heater Corporation Designs and Manufactures Heating Elements, Temperature Sensors and Controls, and Turnkey Process Heating Systems. Thousands of products including accessory items are available from stock. Request our 864 page Visionary Solution catalog for product and engineering information.
Black Oxide Finishing System features CNC operation.
January 30, 2008 -
TRU TEMP® CNC non-polluting process uses integrated programmable hoist and tank to automatically process iron and steel components with black oxide finish. Operating as self-controlled unit, repeatable solution employs digital Allen Bradley PLC with manual joystick backup. It is supplied as standard with 110 gal tank line system that has output capacity of 4,000-6,000 lb per 8 hr shift. Process program handles up to 3 loads concurrently, with cycle time of 28 min.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Birchwood Casey Announces New Automated TRU TEMP® CNC Black Oxide Finishing System - Automatically Processes Finished Parts in 28 Minutes without Operator Attention
Eden Prairie, Minnesota: CNC (computer numerical control) has arrived for black oxide finishing using the patented and proven TRU TEMP® low temperature, non-polluting finishing process.
This new TRU TEMP CNC line utilizes an integrated programmable hoist and tank line to automatically process iron and steel components with a high quality black oxide finish. Designed to operate as a self controlled unit that eliminates the labor costs required with manual hoist lines, this CNC system is highly repeatable, eliminates process guesswork and has large output capabilities. A standard, 110 gallon tank line system has an output capacity of 4-6000 pounds per 8 hour shift. The system can be sized and configured to accommodate any volume of work or production circumstances.
Hoist and superstructure have a 500 lb. load capacity and operates by Allen Bradley PLC digital control with a manual joystick backup. Process tanks are extrusion welded, ¾ inch polypropylene with gusset supports under the top rim and perimeter girthing. Tanks have setdown saddles for automatically centering part loads accurately. Tanks can be laid out in two ways; with pickup and drop-off points at opposite ends of the line or with a single load/unload station with the hoist pickup and drop-off at the same point. The process program can handle up to three loads concurrently, for a maximum throughput of five loads an hour.
The TRU TEMP CNC hoist processes parts through the following station sequence: Station 1: Load Pickup; Station 2: Alkaline Soak Clean; Station 3/4: Double Counterflow Rinse; Station 4: Mild Acid Surface Prep; Station 5: Cold Overflow Rinse; Station 6: TRU TEMP Black Oxide; Station 7: Cold Overflow Rinse; Station 8: Rust Preventative Oil; Station 9: Load Dropoff. Process cycle is 28 minutes.
The TRU TEMP finish produces a satin black magnetite coating just 0.5 microns thick (20 millionths) with no effect on part dimension or material hardness. The finish withstands up to 100-200 hours of neutral salt spray (ASTM B 117) or several hundred hours of humidity (ASTMD1748), (verified by independent testing). The high level of corrosion protection is important for both part storage and shipment in corrosive atmospheres including ocean shipment.
Mark Ruhland, Birchwood Casey vice president reports, "CNC part finishing using the unique TRU TEMP process is now possible on any scale, large or small. Without adding labor, this new TRU TEMP system brings the many benefits of automated black oxide finishing to most manufacturers at no more than the cost of a small machining center."
Want more information?
Call 952-937-7931.
See at www.birchwoodcasey.com (http://www.birchwoodcasey.com) Email: info@birchwoodcasey.com
Or write to Birchwood Casey, 7900 Fuller Road, Eden Prairie, Minnesota 55344-9702. Fax: 952-937-7979. Company Information: Name: Birchwood Casey Address: 7900 Fuller Rd. City: Eden Prairie State: MN ZIP: 55344 2138 Country: USA Phone: 952-937-7931 FAX: 952-937-7979 http://www.birchwoodcasey.com/metal
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
