January 22, 2008 -
Part of Layer-2 Edge Architecture/Channel Blanket System, Model BWS-8012 provides IP-packet processing of wireless communications. Sophisticated scheduling algorithms are used dynamically to allocate capacity to clients, allowing same channel to be transmitted from every access point in system without co-channel interference. Switch meets industry standards for WLAN and Ethernet connectivity, and has PoE built-in, eliminating need for midspan or endspan device.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Belden® Now Offers a 12-Port Intelligent WLAN Switch for Added Flexibility When Using the Belden Wireless Solution
RICHMOND, IN - Belden, a world leader in the development of signal transmission solutions for wired and wireless enterprise networks, as well as the industrial, broadcast, residential and security markets, announces the addition of a 12-port Wireless LAN Switch to its existing 8-port and 24-port switch offerings. The WLAN switches are a key component of the Belden Wireless Solution: an innovative Layer-2 Edge Architecture/Channel Blanket System designed to help users achieve a guaranteed and predictable rate of wireless connectivity and Quality of Service.
In the Belden Wireless System, the Switches (Part Nos. BWS-8008, BWS-8012 and BWS-8024) take care of the IP-packet processing of all wireless communications. Unique to the Belden Channel Blanket solution, sophisticated scheduling algorithms are used dynamically to allocate capacity to clients, i.e., allowing the same channel to be transmitted from every Access Point in the system without co-channel interference. The Switches also create multiple Channel Blankets to deploy any number of Belden XtraThin(TM) Access Points (APs). As a result, organizations can tailor the WLAN configuration to support different types of users and applications, all at the same time, without the performance trade-offs typically demanded in traditional wireless LAN installations. In addition, all three versions of the Belden Switch can be used alone - or they can be daisy-chained in a networked configuration to achieve the users' scalability goals.
The Switches meet all applicable industry standards for WLAN (IEEE 802.11 a/b/g) and Ethernet connectivity, and have Power-over-Ethernet (PoE) built-in, eliminating the need for a midspan or endspan device.
About the Belden Wireless Solution
The Belden Wireless Solution offers a robust architecture that is fundamentally different from that of standard WLANs, which use cell-based technologies requiring complex RF Cell Planning to avoid co-channel interference. Belden's Wireless Solution is a Layer-2 Edge solution with a unique Channel Blanket topology to allow each radio channel to be used everywhere, at every Access Point, thereby creating blankets of continuous wireless coverage with no roaming latency or co-channel interference problems. The solution provides for the seamless convergence of data, video and voice (VoWLAN) and is future-proofed for Voice over WiFi. It is exceptionally easy to deploy, configure and maintain and provides consistently high throughput and predictable Quality of Service even when cell traffic is high.
Security concerns are addressed by compliance with IEEE 802.11i (also known as WPA2) for authentication as well as encryption. The system set up also allows for Rogue AP detection. Advanced levels of security are available through Belden eco-system partners such as AirTight® Networks.
For more information on the Belden Wireless Switches and the Belden Wireless Solution, contact Belden, P.O. Box 1980, Richmond, Indiana 47375, or call 1.800.BELDEN.1. FAX: 765.983.5294. Or visit the Web site: www.belden.com.
About Belden
Belden is a leader in the design, manufacture, and marketing of signal transmission solutions for data networking and a wide range of specialty electronics markets including entertainment, industrial, building management and aerospace applications. Belden has manufacturing facilities in North America, Asia and Europe as well as distribution centers in the U.S., Canada, Singapore, Australia and The Netherlands. A majority of Belden's manufacturing, engineering and support functions are registered to the International Organization for Standardization. Company Information: Name: Belden Address: 2200 US Hwy. 27 S. City: Richmond State: IN ZIP: 47375 Country: USA Phone: 800.235.3364 FAX: 765-983-5294 http://www.belden.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
