Continuous Rotary Mixer features 316 SS sanitary design.
September 25, 2007 -
Designed to blend ingredients in ratios as extreme as 1 ppm with 100% uniformity, Model 16-4SS features capacity range of 85 cu-ft/hr at 1 min residence time to 42 cu-ft/hr at 2 min residence time. Slowly rotating 16 in. x 4 ft cylinder contains mixing flights that impart forward- and reverse-pitch, back flow mixing action that distributes bulk ingredients thoroughly and gently. Drum angle can be adjusted from 0-12° to control product residence time and throughput rate.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
UTICA, NY - A new Model "16-4SS" Sanitary Rotary Continuous Mixer from Munson Machinery blends ingredients in ratios as extreme as one part per million with 100% uniformity regardless of disparities in the bulk densities, particle sizes or flow characteristics of ingredients, which may include liquid additions. Capacity ranges from 85 cu ft/h (2.45 cu m/h) at 1-minute residence time, to 42 cu ft/h (1.19 cu m/h) at 2-minutes residence time.
The slowly rotating 16 in x 4 ft (406 x 1219 mm) cylinder contains proprietary mixing flights that impart a forward- and reverse-pitch, "back flow" mixing action that distributes bulk ingredients thoroughly and gently in short residence times, while eliminating internal restrictions where material could plug or accumulate.
An optional internal stainless steel spray line with spray head allows uniform introduction of a liquid additive to the blended material. The line is suited for spray coating, de-dusting, perfuming, agglomerating and conditioning of materials. The tumbling and cascading effect produced by internal flights achieves 100 percent uniform distribution of liquids with no overspray.
Unlike designs that shift masses of material back and forth and distribute weight unevenly, the steadily rotating cylinder reportedly produces a gentle and consistent mixing action using a smaller drive motor of 0.5 HP (.37 kw). RPM may be adjusted to compensate for angles of repose and densities of different mixtures.
The drum angle can be adjusted from 0° to 12° to control product residence time and throughput rate.
Solid weirs on the discharge end act as a "dam" allowing materials to build a "residence volume" in the machine and overflow the weir.
Dust-tight diaphragms at both the intake and discharge ends are securely retained against the mixing drum and revolving cylinders, preventing the escape of dust or fumes. Material is fully discharged at the end of a run for rapid sanitizing and changeovers.
The mixing drum is supported by heavy-duty Nylon or hardened steel "trunnion rollers" that ride on machined "trunnion rings" for minimum power consumption and rapid maintenance.
Material contact surfaces are of #316 stainless steel finished to sanitary standards. Also available are carbon steel, AR-235, #304 stainless steel and specialized materials such as Duplex stainless and Hastalloy. Liners and special configurations are also available.
The company also offers large-scale Sanitary Rotary Continuous Mixers with up to 20 HP (14.92 kw) in diameters to 60 in (152 cm) and lengths to 15 ft (457 cm), having capacities of 4275 cu ft/h (121 cu m/h) at 1-minute residence time, and 2100 cu ft/h h (59 cu m/h) at 2-minutes residence time.
Other Munson blending equipment includes Rotary Batch Mixers, High Intensity Blenders, Forberg mixers, and Ribbon, Paddle and Plow Blenders. Size reduction equipment produced by the company includes Screen Classifying Cutters, Centrifugal Impact Mills, Rotary De-Clumpers, Attrition Mills, Hammer Mills and Shredders.
For information contact Munson Machinery Company, Inc., 210 Seward Ave., Utica, NY 13503-0855, 800-944-6644, info@munsonmachinery.com, www.munsonmachinery.com.
Contacts:
Public Relations:
Rapp Advertising, Inc.
Paula Jacobs
USA E-mail this person Company Information: Name: Munson Machinery Co., Inc. Address: 210 Seward Ave. City: Utica State: NY ZIP: 13503 Country: USA Phone: 800-944-6644 FAX: 315-797-5582 http://www.munsonmachinery.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
