Archive News Story
(Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Custom Manufacturing Service produces passive devices.
August 14, 2007 -
HighQ(TM) copper on silicon integrated passive device (IPD) manufacturing services are available for those with ready-for-production product and those needing custom product designs. This 8 in. wafer technology, for production of passive devices used in portable and wireless applications, offers thick copper inductors, MIM capacitors (0.62 fF/µm²), and TiN resistors (9 W/square). Products withstand -65 to +150°C temperature cycling and can operate in 150°C for up to 504 hr.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: June 5, 2007
ON Semiconductor Introduces HighQ(TM)Copper on Silicon Integrated Passive Device Process Technology and IPD Product Design Tools
High quality IPD technology is ideal for passives used in portable/wireless applications where high performance and cost competitiveness are a must
INTERNATIONAL MICROWAVE SYMPOSIUM - Honolulu, HI - June 5, 2007 - ON Semiconductor (Nasdaq: ONNN), a global supplier of semiconductor solutions that annually ships over 30 billion devices, has announced the expansion of its advance process technology offerings to include HighQ(TM) copper (Cu) on silicon (Si) integrated passive device (IPD) manufacturing services. This innovative 8-inch wafer technology delivers higher performance than less sophisticated Cu Si processes at a far better cost than expensive, ultra-high performance Gold (Au) on Gallium Arsenide (GaAs) based passive products.
ON Semiconductor's HighQ(TM) IPD process technology is ideal for the production of passive devices - such as baluns, couplers, and filters that are used in portable and wireless applications where higher performance equates to longer battery life.
"Until now, designers have had to sacrifice performance when choosing passive devices for their board designs in order to deliver cost competitive, consumer products," said Rich Carruth, general manager of manufacturing services for ON Semiconductor. "Gold on GaAs passives deliver the preferred performance but are often entirely too cost prohibitive for use in high volume consumer products like cell phones and other wireless devices. Typical Copper on Si passives offer a better cost than GaAs, but performance has lagged. Passive devices based on ON Semiconductor's HighQ(TM) process, provide designers a valuable third option - higher Q than typical Cu Si at a much more competitive price than GaAs."
The Process
The IPD process is run in ON Semiconductor's world class 200 mm manufacturing facility located in the U.S. The facility features best-in-class prototype and production cycle times and features hi-tech yield and failure analysis equipment and systems.
The HighQ(TM) process technology offers thick copper inductors, MIM capacitors (0.62 fF/um2) and TiN resistors (9 ohms/square). It is a proven reliable process that will meet the full suite of reliability evaluations to demonstrate the robustness of the solution.
· Temperature cycling -65°C/150°C
· Full intrinsic reliability on metals, Vias and MIM
· High temperature Op life (150°C, 504 hours)
· ESD Rated: HBM, MM
IPD Products
"ON Semiconductor is offering its HighQ(TM) manufacturing services to customers with ready-for-production product and customers needing custom product designs," said Carruth. "Our rapid prototyping enables a customer to move from design to manufactured silicon in as little as six weeks."
Among the products that can best utilize the HighQ(TM) process technology are baluns, filters, and filter/couplers for portable and wireless applications.
ON Semiconductor is currently developing a line of HighQ(TM), high bandwidth filters for electromagnetic interference (EMI) reduction applications on high speed serial interfaces. Samples will be available this summer with production scheduled to ramp in the fourth quarter of 2007.
IPD Design Tools
ON Semiconductor has a full-featured design kit for the IPD technology, available for the company's manufacturing services customers to use. This design kit enables efficient simulation to actual first silicon results and includes standard Cadence(TM) design tools:
· PCELL Generators, Views, etc.
· Cadence Assura DRC, LVS
· Cadence RFDE environment with Agilent ADS models
· Fully automated conversion from layout to the HFSS simulation environment.
The design kit is a key enabler to the rapid prototyping capabilities ON Semiconductor is offering to potential customers.
For additional technical information visit www.onsemi.com, or contact Frank Myers at frank.myers@onsemi.com.
About ON Semiconductor
With its global logistics network and strong portfolio of power semiconductor devices, ON Semiconductor (Nasdaq: ONNN) is a preferred supplier of power solutions to engineers, purchasing professionals, distributors and contract manufacturers in the power supply, computer, consumer, portable/wireless, automotive and industrial markets. For more information, please visit ON Semiconductor's website at http://www.onsemi.com.
ON Semiconductor and the ON Semiconductor logo are registered trademarks of Semiconductor Components Industries, LLC. All other brand and product names appearing in this document are registered trademarks or trademarks of their respective holders. Although the company references its Web site in this news release, such information on the Web site is not to be incorporated herein.
Contacts
Anne Spitza
Marketing Communications
ON Semiconductor
(602) 244-6398
anne.spitza@onsemi.com
Heather Gaynor
Dix & Eaton on behalf of ON Semiconductor
216.241.3079
Public Relations:
Dix & Eaton
Heather Gaynor
USA
Phone: 216-241-3079
General Information:
Frank Myers
USA E-mail this person Company Information: Name: ON Semiconductor, LLC Address: 5005 E. McDowell Rd. City: Phoenix State: AZ ZIP: 85008 Country: USA Phone: 602-244-6600 http://www.onsemi.com/
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
