Drive Adapters replace IDE/SATA HDDs with CF media.
April 25, 2007 -
Offered in 3 versions, CF Hard Drive Adapters enable Compact Flash (CFI/II) media or Micro Drive to be used as direct replacement for 2.5 in. IDE or SATA hard drives (HDDs) in notebook, desktop, or industrial PCs. SATA version has single CF slot, while IDE and embedded 44-pin IDE-CF adapters offer choice of 1 or 2 slots. Once installed, CF card appears as ordinary hard drive to system BIOS and operating system. It can also be configured as boot device.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Addonics Adapters Allow IDE/SATA Hard Drives to be Replaced with Compact Flash Media in Notebook, Desktop or Industrial PCs
SAN JOSE, CA (April 4, 2007) -- Addonics Technologies has announced a family of CF Hard Drive Adapters, which allow users to replace 2.5-inch IDE/SATA hard drives with shock/vibration resistant and less power-hungry Compact Flash (CF) media.
This new family of hard drive to CF adapters enables Compact Flash (CFI/II) media or Micro Drive to be used as a direct replacement for the 2.5" IDE or SATA hard drives for Notebook systems. Addonics is also offering an embedded version for processor boards on industrial PCs. With these new Addonics adapters any equipment, such as a notebook computer, that uses a 2.5" IDE or SATA hard drive can be easily converted to use the more reliable CF media. Once installed, the CF card appears as an ordinary hard drive to the system BIOS and operating system and can also be configured as a boot device. No special device drivers are required. The adapters are compatible with Windows, Mac, Linux and Solaris Operating Systems.
With the increased capacity and lowering costs of flash media, replacing the hard drive with CF as a boot drive is now a viable and advantageous alternative because CF offers lower power and no moving parts.
Replacing a notebook hard drive with CF media for example is a simple procedure. Users just need to locate the 2.5" IDE or SATA drive door and remove the screws; remove the 2.5" IDE or SATA hard drive from the connector; attach the Addonics CF Hard Drive Adapter with CF card onto the same connector matching the key pins; replace the door and the device is ready to use.
The primary products in the Addonics CF adapter family include the IDE - CF Hard Drive Adapter and the SATA - CF Hard Drive Adapter. The IDE version comes with choice of single slot or dual slots to accommodate up to two CFs for more storage capacity. MSRP for the single slot is $24.99 and for the dual slots is $29.99. The SATA version has a single CF slot and is MSRP for $35.99.
The Embedded 44-pin IDE-CF adapter, also with choice of single slot or dual slots, is an ideal solution for industrial PCs, embedded systems or applications that require a simple and economical bootable CF slot. The solution plugs directly into the 44-pin IDE port of any processor board. The small form factor of this adapter can be easily mounted inside any system. MSRP is $24.99 for the single slot and $29.99 for the dual CF slot adapter.
The products will be available in April through the company online store www.shopaddonics.com, major catalog companies, resellers, VARs and distributors, including Amazon.com, PC Connection, CDW, Buy.com, Provantage.com, Insight, and Ingram Micro.
Addonics Technologies Inc. designs, manufactures, and markets a broad line of external and mobile storage products. Addonics is headquartered at 2466 Kruse Drive, San Jose, CA 95131, Phone: 408-433-3899. Visit Addonics at www.addonics.com
All products/company names are either trademarks or trade names of their respective holders. Company Information: Name: Addonics Technologies Corp. Address: 48434 Milmont Drive City: Fremont State: CA ZIP: 94538 Country: USA Phone: 888-593-2718 FAX: 510-438-5236 http://www.addonics.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
