Evaluation Kit enables customization of RFID solutions.
April 23, 2007 -
With 125 kHz ATA2270-EK1 Demo Kit, users can evaluate and prototype LF IDICŪs, which are used in broad range of RFID applications, including access control, industrial automation, loyalty cards, anti-counterfeiting, and animal identification. Kit includes IDIC transponders, reader unit, ATmega128 AVRŪ Flash microcontroller, antenna, and power supply. On-board joystick, LCD, and control buttons enable user interaction with RFID system without additional connected PC.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Atmel Introduces Advanced Stand-alone AVR ATmega128-Based 125-kHz RFID Evaluation Kit
HEILBRONN, Germany, March 28 /- Atmel(R) (NASDAQ:ATML) announced today the availability of the ATA2270-EK1125-kHz RFID demo kit. This new kit enables the evaluation and prototyping of Atmel's wide portfolio of LF IDIC(R)s, which are used in a broad range of RFID applications including access control, industrial automation, loyalty cards, anti-counterfeiting, and animal identification. This stand-alone kit is ideal for the evaluation and customization of RFID solutions without requiring advanced knowledge of RF engineering.
Atmel's ATA2270-EK1 provides a completely self-contained means to begin using RFID systems. The kit includes several IDIC transponder samples such as the ATA5567 and ATA5570 read/write ISO card devices for contactless identification, the TK5530 read-only transponder, the ATA5567 coin tag, and other read/write IDIC micromodules. A reader unit using Atmel's read/write base station IC, the U2270B, in conjunction with Atmel's ATmega128 AVR(R) Flash microcontroller, an antenna, and a power supply with international adapters complete the kit. An on-board joystick, LCD, and control buttons enable easy user interaction with the RFID system without requiring an additional connected PC.
The ATA2270-EK1 offers an easy way to test the capabilities and characteristics of Atmel's LF RFID tags and thus allows engineers effective identification of the most suitable RFID solution. The kit supports both read-only and read-write IDICs, including the e5530/TK5530, T5551/TK5551, ATA5567 (T5557), ATA5570, ATA5577, and ATA5558 from Atmel. The convenient LCD displays the data content of the IDICs, and routines included in the AVR software can be used to test the features of Atmel's chips. This kit is also suitable for evaluation of animal tagging and tracking applications. By exchanging the antenna tuning components, the kit can be tuned to 134.2 kHz, which is required for animal tagging analysis. A special routine included in the AVR software enables data to be read and written in accordance with ISO standards 11784 and 11785. The ATA2270-EK1 will also support Atmel's next generation of IDIC products.
Thanks to the inclusion of unrestricted source code and Gerber schematics, the ATA2270-EK1 provides a unique prototyping environment for low-cost turnkey solutions, allowing users to develop, implement, and test system-level designs. The ATA2270-EK1 is supported by all the standard AVR development tools such as AVR Studio(R), STK(R)500, JTAGICE mkII, etc.
Availability and Pricing
Samples of the new LF IDIC evaluation kit ATA2270-EK1 are available now. Pricing starts at US $299 per unit.
About Atmel
Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions. Focused on consumer, industrial, security, communications, computing and automotive markets, Atmel ICs can be found Everywhere You Are(R).
NOTE: Atmel(R), logo and combinations thereof, IDIC(R), AVR(R), AVR Studio(R), STK(R), Everywhere You Are(R) and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
Information
Information on the ATA2270-EK1 demo kit may be retrieved at http://www.atmel.com/dyn/products/too... Identification&tool_id=3956
CONTACT: Dr. Susanne van Clewe, Marcom Manager Communications and Automotive Products, +49 7131 67-2081, or susanne.van-clewe@hno.atmel.com, or Helen Perlegos, Public Relations - USA and Asia Pacific Rim, +1-408-487-2963, or hperlegos@atmel.com, or Veronique Sablereau, Corporate Communications Manager - Europe, +33 1 30 60 70 68, or fax, +49 7131 67-2423, or veronique.sablereau@atmel.com
Marketing:
Susanne van Clewe Marcom Manager Communications and Automotive Products
INTL
Phone: +49 7131 67-2081 E-mail this person
General Information:
Helen Perlegos
USA
Phone: 408-487-2963 E-mail this person Company Information: Name: Atmel Corp. Address: 2325 Orchard Pkwy. City: San Jose State: CA ZIP: 95131 Country: USA Phone: 408-441-0311 FAX: 408-436-4200 http://www.atmel.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
