Archive News Story
(Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Three-Piece Couplings feature keyways as standard.
February 7, 2007 -
Oldham couplings and zero-backlash jaw couplings come standard with keyways, which promote torque capacity by creating positive drive and ensuring precise positioning of coupling hub. Both styles, comprised of 2 aluminum hubs with mating center section for torgue transmission, allow for mixing of hubs with different bores. While oldham coupling hubs have drive tenons that do not overlap when combined with mating center disc, zero-backlash jaw couplings have jaws that do overlap.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: February 5, 2007
New from Ruland! Oldham Couplings and Jaw Couplings with Standard Keyways
Marlborough, Massachusetts, February 2007. Ruland Manufacturing Co., Inc. now offers oldham couplings and zero-backlash jaw couplings with standard keyways as a stock item. Keyways increase the torque capacity of the coupling by creating a positive drive while also ensuring precise positioning of the coupling hub. The added torque capacity provided by the keyway may be needed in applications with shock loads due to sudden starts and stops or reversals, when the bore is small relative to the coupling OD, when the shaft may be undersized, or when temperature changes may alter the size of the shaft or the bore in application. Precise positioning of the coupling hub may be needed in applications where phasing of the shafts is important for timing.
Oldham couplings and jaw couplings are each three piece coupling assemblies comprised of two aluminum hubs with a mating center section for transmission of torque. The three piece design has several advantages over single piece couplings including ease of assembly and the ability to conveniently mix and match hubs with different bores, even inch to metric combinations.
Where oldham and jaw couplings differ markedly is in performance. Oldham coupling hubs have drive tenons that do not overlap when combined with the mating center disc. This design allows for easy sliding to accommodate misalignment with very light bearing loads since the only resistance caused by misalignment is frictional. The couplings also operate as a mechanical fuse since the hubs will spin freely if the center disc fails, and have the advantages of electrical isolation all at a relatively low cost. Oldham couplings offer zero backlash and high torque capacity. They accommodate angular and axial misalignment, but are especially useful in applications where parallel misalignment is present.
In contrast, zero-backlash jaw couplings have "jaws" that overlap when combined with their mating center spider. The couplings are thus fail safe in that the jaws will stay engaged even if the spider fails. Spiders are made of an advanced polyurethane material and available in three different hardness levels to provide varied levels of shock absorption. Ruland jaw couplings have a curved jaw profile and press fit to provide zero-backlash. Standoffs, located on the spider "limbs", assist in angular misalignment capabilities, as well as electrical isolation. Jaw couplings are ideal for many servo applications with reversing torque since shock absorption, vibration dampening, and zero backlash are often required.
Ruland oldham couplings and jaw couplings are offered from stock in a choice of six outside diameters from 1/2" (13 mm) to 2 ¼" (57 mm) in both set screw style and clamp style. A large variety of inch and metric bore sizes starting at 1/8" (3 mm) is available with keyways offered on 3/8" (8 mm) and larger bores.
Oldham couplings and jaw couplings are part of Ruland's complete product line which includes three additional types of zero-backlash motion control couplings: beam couplings, bellows couplings and miniature disc couplings, as well as shaft collars and rigid couplings.
Company Information:
Ruland Manufacturing Co., Inc. has been a precision manufacturer since 1937, making a variety of products including the valve that pressurized the spacesuit of the first American to walk in space. Ruland's focus for the past 40 years has been on high performing shaft collars and couplings. The complete line of products includes shaft collars and rigid couplings, and a full line of motion control couplings: beam couplings, bellows couplings, oldham couplings, miniature disc couplings and zero backlash jaw couplings.
Contact:
Ruland Manufacturing Co., Inc.
6 Hayes Memorial Drive
Marlborough, MA 01752
Phone 508 485 1000
Fax 508 485 9000
E-mail marketing@ruland.com
Internet www.ruland.com
TPR International appreciates a copy of the magazine with this article. Thank you in advance!
Contacts:
Public Relations:
TPR International
Christiane Tupac-Yupanqui
Hermann-Lons-Weg 57
Sandhausen D-69207
INTL
Phone: 0049-6224-172751
FAX: 0049-6224-172752 E-mail this person Company Information: Name: Ruland Mfg. Co., Inc. Address: 6 Hayes Memorial Dr. City: Marlborough State: MA ZIP: 01752 Country: USA Phone: 800-225-4234 FAX: 508-485-9000 http://www.ruland.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
