January 8, 2007 -
Available in 5 and 10 kW models, Sens-A-Coil integrates thermistor element into plastic overmolded copper clip that snaps onto 3/8 in. return bends. Sensor is housed in small bulb, which is attached to copper clips, maximizing sensing surface area while allowing sensing element to quickly react to any changes in refrigerant temperature. Sens-A-Coil comes with 10 ft AWG No. 22 PVC-jacketed cable and requires no tools for installation.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
New Easy-to-Install Thermistor Temperature Sensor Provides Fast Response
St. Marys, PA - November 30, 2006 - Spectrum Sensors and Controls introduces the Sens-A-Coil thermistor type sensor for monitoring the refrigerant temperature in condenser and evaporator coils. This patented sensor integrates a fast response thermistor element into a plastic overmolded copper clip specially designed to snap onto 3/8" return bends. Sens-A-Coil features a sensor housed in a small bulb which is attached to the copper clips. This design maximizes sensing surface area allowing the sensing element to quickly react to any changes in the refrigerant temperature and provide excellent thermal tracking.
Previously, a number of "thermowell" or strap-on designs have been used for this function, but they either were difficult/time consuming to install or did not accurately sense the refrigerant temperature. The Sens-A-Coil solves both of these problems and since no tools are needed for installation, time and money can be saved in both production and field service environments.
The Sens-A-Coil is available in 5 and 10 kW models and comes with a 10 ft. AWG#22 PVC jacketed cable. The unit also is well suited for use in HVAC diagnostic equipment and tools. These sensors are priced at approximately $5.50 per 1,000 pieces with a lead time of stock to 4 weeks.
About Spectrum Control
Spectrum Control, an ISO 9001 and QS 9000 certified company, designs, manufactures and markets a broad line of EMI/RFI filters and power components, power management systems, microwave components, and position and temperature sensors and controls.
Spectrum Sensors & Controls Advanced Thermal Products Operation produces temperature sensing probes and assemblies, PTC and NTC thermistors and resistive temperature detectors (RTDs). The company's Precision Positioning Sensors Operation manufactures a variety of precision co-molded conductive plastic potentiometers and position sensors, as well as element segments and cable assemblies. Designs for these potentiometers and position sensors include rotary, motorized, hollow shaft, linear and fader types, as well as custom assemblies.
The Spectrum Control EMI Filters and Components Group produces discrete surface mount EMI filters, resin sealed and hermetically sealed EMI filters, EMI filtered arrays, EMI filtered connectors, ESD/EFT protected connectors, filtered data-com connectors, gaskets and shielding, patch antenna elements, single line filters, filtered terminal blocks, power entry modules, power line filters, military/aerospace multi-section filters, and commercial custom assemblies.
The Power Management Systems Group produces AC and DC power distribution and remote management systems. Products include off-the-shelf SMART start products as well as customized products or systems designed to suit specific user requirements. DC power circuit breaker panels, power outlet strips and data acquisition modules are also offered.
Spectrum Microwave is a wholly owned subsidiary of Spectrum Control, Inc. and produces a wide range of microwave components and systems. Integrated Microwave Systems include switchable filter banks, low noise amplifiers, local oscillator multipliers, microwave synthesizers, digitally tuned oscillators and integrated assemblies. Microwave Filters include bandpass filters and duplexers, lumped element filters, cavity filters, waveguide filters, tubular filters, base station products and resonators. Frequency Control Components include a wide range of amplifiers, mixers, voltage controlled oscillators (VCOs) and dielectric resonator oscillators (DROs).
For further product information, contact, Devin Brock, Spectrum Sensors & Controls, Inc., St Marys, PA 15857. Phone: 814-834-1541 Fax: 814-834-1556, Email: sales@atpsensor.com, Website: www.atpsensor.com
Contacts:
Public Relations:
Altman-Hall Associates
Tim Glass
235 West Seventh Street
Erie PA 16501
USA
Phone: 814-454-0158
FAX: 814-454-3266
General Information:
Devin Brock
USA
Phone: 814-834-1541
FAX: 814-834-1556 E-mail this person Company Information: Name: Spectrum Control, Inc. Address: 8031 Avonia Rd. City: Fairview State: PA ZIP: 16415 Country: USA Phone: 814-474-2207 FAX: 814-474-2208 http://www.spectrumcontrol.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
