Hermetically Sealed LVDT Sensors provide 4-20 mA I/O.
January 4, 2007 -
For mechanical position measurement where hard connection can be made to test piece, blind-bore HSI 750 and through-bore HSIR 750 Series of free-core LVDTs provide 4-20 mA current loop output. Units are ¾ in. in dia and are available in full ranges from 0.10-20 in. For applications where hard mechanical connection cannot be made between sensor's moving core and test piece, GHSI 750 and GHSIR 750 Series of spring-loaded LVDTs are available in full ranges of 0.10-4 in.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Hermetically-Sealed LVDT Sensors Feature 4-20 mA I/O In Both 2-Wire or 3-Wire Configurations
For Simplified Field Integration
Pennsauken, NJ, January 2, 2007... Macro Sensors, (www.macrosensors.com), specialists in the manufacture of LVDT-based linear position sensors and gaging probes, offers a new family of rugged, hermetically sealed LVDTs that provide 4-20 mA input/output for easy field integration with PLCs, digital indicators, host computer-based data processing, and QC data collection systems. Units can be configured for either loop powered two-wire or externally powered three-wire sourcing output to address different I/O requirements in various applications.
Offered in both hard-connected and spring-loaded versions, Macro Sensors' 4-20 mA current loop output LVDTs are hermetically sealed against dirt, water, steam, solvents, and other corrosive elements, that enables their installation in hostile environments while the loop wiring connects to remote indicators and/or controllers located in environments safe from hostile conditions. These units offer precise output with a maximum linearity error of only 0.1% of full range output using a statistically best-fit straight line.
For mechanical position measurement where a hard connection can be made to the test piece, Macro Sensors offers the HSI 750 and HSIR 750 Series of free-core LVDTs that provide a 4-20mA current loop output. Available in full ranges from 0.10 inches (2.5 mm) to 20 inches (500 mm), these ¾-inch (19mm) diameter LVDTs are available as either blind bore units (HSI 750 Series) terminated in a glass-sealed axial connector that prevents the core from passing completely through the coil assembly or in a through-bore design (HSIR 750 Series) with the connector mounted radially to facilitate easy access to either end of the LVDT's core for better mechanical support and core guidance, as well as easier cleanout in dusty or gritty environments. The radial connector also allows a shorter installed length to the sensor compared to units of the same range with axial connectors.
For applications where a hard mechanical connection cannot be made between the sensor's moving core and the test piece, Macro Sensors offers the GHSI 750 and GHSIR 750 Series of spring-loaded LVDTs. This style of sensor consists of a spring-loaded shaft connected to the core of the LVDT that runs in a precision sleeve bearing. The probe shaft is extended by a spring exerting a nominal force of 6 to 20 ounces depending upon total range. These sensors feature a measurement repeatability of 0.0001 inches (2.5 µm) or better.
Available in full ranges of 0.10 inches (2.5 mm) to 4 inches (100 mm), the GHSI 750 and GHSIR 750 Series are ideal for the use in machine tool controls, go/no-go inspection, and statistical quality control (SQC) systems or as part of a closed-loop control system. For simplified mounting, both series have a 1/2-20 UNF-2A threaded front end of the housing, permitting the user to install the LVDT in a mating threaded part or by using the two hex nuts furnished with the sensor. This results in a ready-to-use package for position measurements and long range gaging applications. Units are also available with a radial connector version(GHSIR) that allows a shorter installed length, and in air-extend/spring-retract versions for custom gaging systems used with transfer lines and automated test stands.
A mating connector plug is supplied with all HSI, HSIR, GHSI, and GHSIR 750 Series sensors. For more information about Macro Sensors' lines of 4-20 mA LVDT transmitters, visit our web site at www.macrosensors.com or contact us at sales@macrosensors.com
About Macro Sensors
Macro Sensors' extensive line of LVDT-based linear and rotary sensors are used for linear position measurement and feedback in a variety of industrial applications including factory automation, motion control systems, metal fabricating, automotive assembly as well as power plants, gas/steam turbines. Incorporated in 1994, the Company offers more than 200 years of cumulative design and manufacturing experience by its key staff in serving its OEM and end-user international customer base. On June 1, 2005, Macro Sensors was acquired by AST, manufacturer of state-of-the-art Micro-Electro- Mechanical- Structures (MEMS) based pressure sensors, transducers, and transmitters. Common applications of AST sensor products are in industrial OEM, hydraulic systems, fuel cells, medical gases, HVAC/R, refrigeration, oil & gas exploration/production, and off-road vehicles. For more information on AST products and technology, visit the AST website at www.astsensors.com.
U.S. Route 130 North, Bldg. 22, Pennsauken, NJ 08110-1541
Tel: 856-662-8000 Fax: 856-317-1005 Company Information: Name: Macro Sensors Address: 7300 US Route 130 North, Bldg. 22 City: Pennsauken State: NJ ZIP: 08110 1334 Country: USA Phone: 856-662-8000 FAX: 856-317-1005 http://www.macrosensors.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
