September 5, 2006 -
Equipment and tooling package enables coating of wafers with die attach materials down to 25 microns thick. It eliminates limitations on chip footprint due to chip fillet formation and resin bleed while allowing uniform deposition of materials with tolerances of ±7 microns using flexible screen printing platform. Solution utilizes Micron-class Galaxy mass imaging system, ultra-flat pallet, die attach stencil or screen, and squeegee.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: August 1, 2006
New Tools from DEK Enable 25 Micron Backside Wafer Coating at High-Speed
Fueled by the need for faster processing times and smaller device footprints, DEK has developed a next-generation equipment and tooling package that enables the coating of wafers with ultra-thin die attach materials down to 25 microns in thickness.
Traditional dispensing methods and paste die attach processes have manufacturing challenges such as the inability to achieve emerging UPH (units per hour) requirements, limitations on chip footprint due to chip fillet formation and resin bleed and inherent quality and reliability issues that result from insufficient or uneven adhesive coverage. DEK's system effectively eliminates these issues, allowing the high-speed, high-accuracy uniform deposition of die attach materials as thin as 25 microns with tolerances of +/- 7 microns using a printing process.
Utilizing a Micron-class Galaxy mass imaging system, a DEK engineered ultra-flat pallet, a die attach stencil or screen and a specially designed squeegee, DEK's backside wafer coating process enables ultra-thin, precise deposits of die attach adhesive at high speed with a highly-accurate and flexible screen printing platform. With this method, bondline thickness can be controlled to customer specifications, fillet control is consistent with that of traditional film products without the 20-30% higher cost, UPH is exponentially higher than that of dispensing and the coated wafer can be pre-manufactured and stored until required. The key enablers that allow the deposition of an ultra-thin, 25 micron coating are the ultra-flat pallet that provides the stability and uniformity required to process wafers as thin as 100 microns and up to 300mm in diameter, and the specially engineered squeegee that delicately applies the adhesive paste to the backside of the wafer.
Other significant advantages to DEK's process include the elimination of the fillet and subsequent reduction of paste adhesive volume (potentially by a factor of ten on die less than 0.5 x 0.5 mm), improved inventory control by concentrating the application of wet adhesive in the facility's dedicated print area and streamlining the supply chain by requiring only one paste formulation for various process needs as opposed to the multiple thicknesses and widths necessary with films. Not only is the DEK process delivering advances in die attach material applications, but can be used for all wafer-level coating processes including epoxy and wafer-level protective backside coatings as well.
Because the process is run on a flexible mass imaging platform, the system can also be easily re-deployed for other packaging applications such as wafer bumping, DirEKt Ball Placement(TM), thermal interface material (TIM) processing and encapsulation.
For more information on DEK's backside wafer coating process or any of the company's advanced packaging solutions, log onto www.dek.com.
About DEK
DEK is a global provider of advanced pre-placement manufacturing solutions and innovative deposition technologies for a wide range of electronic materials. For more information, visit DEK at www.dek.com.
Company Contact
Neil MacRaild
DEK USA
Tel: 408-954-8582
E-mail: nmacraild@dek.com
Internet: www.dek.com
Contacts:
General Information:
Neil MacRaild
USA
Phone: 408-954-8582 E-mail this person Company Information: Name: DEK International GmbH Address: 8 Bartles Corner Road City: Flemington State: NJ ZIP: 08822 Country: USA Phone: 908-782-4140 FAX: 908-782-4774 http://www.dek.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
