August 14, 2006 - Intended for computer and telecommunication networks, Compressor SMT MagJack® Series is comprised of 2-tier stacked lineup of 6-, 8-, 12-, and 16-port devices with compressed profile of 0.785 in. Incorporated magnetics provide isolation and EMI suppression necessary for 10/100/1000 Base-T applications into shielded body of connectors. RoHS-compliant units feature 350 µH minimum open-circuit inductance with 8 mA bias current, and operating temperature of -40 to +85°C.

Related categories: Electronic Components and Devices

Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)

Release date: July 11, 2006

New 1 Gigabit MagJack® Connector Series from Bel Stewart Connector

Features a Two-Tier Compressed Profile of Only 0.785" (19.94 mm)

RJ-45 Connectors with Integrated Magnetics and LED Options Engineered for High-Component-Density Networking and Telecom Applications

Glen Rock, PA, July 11, 2006...Released today from Bel Stewart Connector, a subsidiary of Bel Fuse Inc. (NASDAQ: BELFA and BELFB), is the Compressor Series (P/N C85X) of SMT MagJack® connectors for small form factor 1 GHz applications. These new right-angle jacks incorporate the magnetics required to provide the isolation and EMI suppression necessary for 10/100/1000 Base-T applications into the shielded body of a rugged RJ-45 connector, and offer options for 2 LEDs per port. This Series is the latest addition to the Company's comprehensive portfolio of single- and multi-port MagJack Integrated Connector Modules (ICMs) for computer and telecommunication networks. Most notable, the Compressor Series is comprised of a two-tier stacked lineup of 6-, 8- , 12-, and 16-port devices boasting an ultra-low height of only 0.785" (19.94 mm). Specifically engineered to allow EOEMs and OEDs the utmost in system design flexibility as well as reduce their assembly time and cost, the Compressor MagJacks are available with varied internal filter designs to optimize the performance of all the most popular chipsets. Bel Stewart Connectors' 100% RoHS-compliant MagJack product offering meets or exceeds IEEE 802.3ab and ANSI X3.263 standards.

Suitable for CAT 5 and CAT 6 Fast Ethernet cable, the 1 GHz MagJack is ideal for employment in small form factor and chassis applications where space above the PCB is limited. They are uniquely targeted to such ATCA(TM) (Advanced Telecom Computing Architecture) platform rack-mount products as blade servers, and daughter cards, and are widely specified in SOHO (ADSL modems), LAN-on-Motherboard (LOM), hub, and switch applications. Additionally, connectors may be confidently specified for use in NICs (network interface cards), bridges, and routers.

Featuring a full range of magnetic options including transformers, chokes, capacitors, and termination resistors, Bel Stewart Connector's MagJacks have been thoroughly tested to deliver a minimum of 1500 Vrms hipot isolation from EMI and RFI interference. They moreover feature 350 µH minimum OCL (open-circuit inductance) with 8 mA bias current, and an operating temperature range of -40 degrees C to +85 degrees C. Connectors are provided standard with phosphor bronze, gold-plated (30 microinch) contacts to ensure high-cycle life. LED options include yellow, green, red, and bi-colors.

Pricing for Bel Stewart Connectors' Compressor Series (P/N C85X) of MagJacks ranges from $1.75 to $2.25 per port in production quantities. While delivery is 10 weeks ARO, samples are immediately available.

About Bel
Bel (www.belfuse.com) and its subsidiaries, including Stewart Connector, are primarily engaged in the design, manufacture and sale of products used in networking, telecommunications, high speed data transmission, automotive and consumer electronics. Products include magnetics (discrete components, power transformers and MagJack' connectors with integrated magnetics), modules (dc-dc converters, integrated analog front end modules, custom designs), circuit protection (miniature, micro and surface mount fuses) and interconnect devices (passive jacks, plugs and cable assemblies). The Company operates facilities around the world.

Bel Stewart Connector
11118 Susquehanna Trail South
Glen Rock, PA 17327
717-235-7512; Fax: 717-235-4675
Web Site: www.Belstewart.com

Company Information:
Name: Bel Fuse, Inc.
Address: 206 Van Vorst St.
City: Jersey City
State: NJ
ZIP: 07302 4419
Country: USA
Phone: 800-235-3873
FAX: 201-432-9542
http://www.belfuse.com

Story Tools

Go Back |

E-Mail | Print | Post

	View Company Profile at ThomasNet.com
	Company web site
	More news from this company
	Search for suppliers of: RJ-45 Connectors
	Join the forum discussion at: Wired In

Related Stories:
Sep 24, 2008	Ethernet Connector is IP67-rated and ODVA-compliant.
Sep 2, 2008	RJ11/RJ45 Modular Connectors feature protective coating.
Aug 25, 2008	RJ45 Ethernet Connectors offer tool-free installation.
Jul 3, 2008	CAT5 A/B Switch can be controlled manually or remotely.
Jun 13, 2008	Push-Pull Plug Connectors provide IP67 protection.
May 28, 2008	Modular Ethernet Plugs feature metal locking tabs.
May 28, 2008	Communication Interface features safe, direct attachment.
May 22, 2008	Connector is suitable for industrial ethernet applications.
Mar 31, 2008	Magnetic Jacks suit high-speed communications applications.
Mar 25, 2008	Patch Cords suit high-density RJ45 network equipment.
Mar 20, 2008	RJ45 Ethernet Module connects 8 data lines.
Mar 5, 2008	RJ-45 Connector allows tool-free, in-field conductor wiring.
Feb 5, 2008	Connectivity Solutions are built for outdoor applications.
Nov 15, 2007	RJ Connector is designed with optimal wire contact density.
Nov 15, 2007	RJ Connectors deliver Ethernet in harsh environments.
Oct 11, 2007	RJ45 Connector Cordset features overmolded design.
Sep 25, 2007	RJ45 Connector features fully overmolded design.
Aug 17, 2007	Modular Jacks suit fast and gigabit Ethernet applications.
Jun 21, 2007	RJ-45 Coupler suits harsh environments.
Jan 23, 2007	Jack and Plug Connector System helps protect networks.

More New Product News from this company:
Feb 14, 2008	DC-DC Converters feature 4-to-1 input voltage range.
Oct 9, 2007	Half-Brick DC-DC Converters comply with IEEE 802.3af.
Jul 26, 2007	DC/DC Converters suit telecom and datacom applications.
Dec 1, 2006	Modular Connectors meet proposed Category 7a standards.
Nov 28, 2006	Resettable Fuses protect variety of electronic equipment.
Sep 9, 2005	DC/DC Converter features integrated heatsink.
May 2, 2003	Circuit Protection Modules suit Tip and Ring applications.
Oct 15, 2002	Transformers suit high-density PC board applications.
May 20, 2002	DC/DC Converters operate from nominal 3.3 V source.
May 1, 2002	DC/DC Converters power low voltage silicon from 5V source.
Apr 18, 2002	DC/DC Converters provide efficiencies above 90%.
Nov 9, 2001	Transformers are for full rate or ADSL applications.

Brought to you by Thomasnet.com Browse ThomasNet Directory

News provided by ThomasNet Industrial Newsroom^® (TIN). TIN is a comprehensive source of new and timely product information in the industrial marketplace. TIN supplies new product information to the web sites, e-marketplaces and print publications that serve the industrial marketplace. For press release submissions please go to http://news.thomasnet.com/submitpr.html. BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE AGREEMENT.