|
|
|
|
Industrial Microcontroller features 2 ARM 946E cores.
April 18, 2006 -
Designed for time-critical and motion control applications, SoC Microcontroller DCIC9907(TM) features 2 CAN channels, two 10/100 Mbit Ethernet MACs with HW extension, and motion control logic capability. It includes 16 hardware interrupts controlled via internal VIC with total of 32 interrupts available. Integrating complex-motion control block, product controls and supervises any kind of electronic motor directly from IC and operates up to 128 MHz.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.) |
|
|
| |
| |
|
Advertisement
|
|
|
Newsletters |
Your Gateway to a Fast
Changing World
Product News Alerts |
 |
Receive similar stories and other customized
news to keep you in the know on the products shaping
industry. |
Subscribe Free Today
Subscribe View
Sample |
Industry
Market Trends
Has Got It |
- Latest developments
- Trends
- Best practices
- Opinions & Commentary
|
 |
Get Ahead.
Get IMT.
Subscribe Free Today
Subscribe View
Sample |
|
|
|
|
DUALCORE DCIC9907 Industrial Microcontroller with Two ARM Cores Targeted at Time-critical Industrial Control Applications
Nuernberg, Germany - February 21, 2006 - Dualcore Semiconductor(TM) announces a new, unique industrial SoC (System on Chip) Microcontroller DCIC9907(TM) which contains two ARM 946E cores, two CAN channels, two 10/100 Mbit Ethernet MACs with HW extension for real-time protocols, and a versatile motion control logic capability, specifically designed for time-critical and other industrial control applications. DCIC9907(TM) is destined to be the central digital element of a advanced Servo System Platforms.
Although optimized for motion control applications, DCIC9907(TM)'s key features will find application in a wide variety of industrial communication situations, such as:
Field bus controller node (Can 2.0B, ETHERNET Powerlink)
Field bus to Ethernet Network (bridge/firewall, gateway /TCP/IP, web server, firewall)
Real-Time Ethernet control node (EPL Manager Node[Master] or control node [slave])
Real-Time data acquisition and measurement (precision time/capture and intelligent ADC/DAC interfaces)
DCIC9907(TM) is a highly integrated circuit, which supports many high-level functions for controlling and supervising industrial applications. Additionally, DCIC9907(TM) allows you to control applications under difficult real-time conditions, such as tasks which need accurately predicted time performance under all conditions, even when running in parallel with an operating system. Within DCIC9907(TM), one of the two ARM cores can be used for complex real-time control and the second one for system infrastructure, such as HMI (Human Machine Interface) and the required communication interfaces. For this purpose, the versatile real-time operating system EUROS (www.euros-embedded.com) has been ported to DCIC9907(TM).
The two 10/100 MBit Ethernet MAC ports have hardware extensions which support real time protocols via Ethernet. Because there are few affordable solutions available in the market today with such functionality, the new DCIC9907(TM) is ideally suited to time-critical, cost-conscious control applications. Features incorporated in DCIC9907(TM) are the direct result of feedback from key industrial users; for instance, DCIC9907(TM)'s includes 16 hardware interrupts controlled via the internal VIC (Vector Interrupt Controller) with a total of 32 interrupts available (16 Software + 16 Hardware). An additional unique feature is a complex-motion control block integrated into DCIC9907(TM). This control block has all the built-in features necessary to control and supervise any kind of electronic motor directly from the IC. For example, it is possible to control 3 PWM channels in parallel. DCIC9907(TM) can be clocked up to 128 MHz and provides sufficient performance even for very demanding control applications. With 109 I/O pins, DCIC9907(TM) represents a highly flexible System on Chip (SoC).
DCIC9907(TM) was designed to keep power dissipation as low as possible - so no need for heat sinks or even fans! This means that the form factor of customer products can be reduced to a minimum, system costs are decreased and MTBF (Mean Time between Failure) is increased because critical heat on silicon will not be reached.
DCIC9907(TM) will be available from March 2006 in an industrial temperature range 305-pin BGA package at under $US20 in volume.
Key Features:
Twin ARM 946E · 2 x CANbus channels
2 x 10/100 Mbit Ethernet MACs
HW extension for real-time protocols
Integrated Complex Motion Control Block
32 interrupts (16 Software + 16 Hardware)
Up to 128 MHz operation
Very low power dissipation
109 I/O pins
Company Information
For further information please visit www.dualcore.com or contact us directly.
Dualcore Semiconductor GmbH
Campestrasse 12
90419 Nürnberg/Germany
Tel: +49 911 338 433
E-Fax: +49 721 151 314 835
Email: info@dualcore.com
Company Contacts:
DualCore Semiconductor(TM)
Mr. Hans Carper
Tel: +49 8124 527 441
hans.carper@dualcore.com
Contacts:
General Information:
Hans Carper
INTL
Phone: +49 8124 527 441
 E-mail this person
Company Information:
Name: Dualcore Semiconductor GmbH
Address: Campestrasse 12
City: 90419 Nürnberg
Country: Germany
Phone: +49 911 338 433
FAX: +49 721 151 314 835
|
|
|
|
|
 |
ThomasNet News Advertisers
|
|
|
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
