Bit Rate Recorders provide IRIG106 Chapter 10 compatibility.
Archive News Story
(Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Bit Rate Recorders provide IRIG106 Chapter 10 compatibility.
March 10, 2006 -
Targeted for airborne DAQ systems such as flight test recorders, Single-box D5000 Series records at rates to 256 Mbit/s and is available with hard drive or solid state media. Cartridges have front mounted IEEE-1394b interfaces allowing rapid post mission verification and download of data. Three signal module slots accommodate any combination of interface modules, including analog, MIL 1553, PCM, ARINC429, Ethernet, voice, serial, parallel, and video.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: February 9, 2006
Heim Data Systems Enhances D5000 Series with IRIG106 Chapter 10 Compatibility
Compact, High Bit Rate Recorders with Modular Signal Interfacing and Choice of Media
Heim Data Systems, Inc., a leading supplier of data acquisition equipment, introduces a new version of the D5000 Series specifically targeting applications requiring compatibility with the IRIG106 Chapter10 standard. This recently introduced standard defines the data formatting, control interfaces and media directories of airborne data acqusistion systems such as flight test recorders. Designed to be extremely compact, lightweight, and rugged, the economical single-box D5000 Series systems can now be utilized for PCM telemetry, avionics bus and sensor data acquisition in applications requiring compliance.
With modular signal interfacing and interchangeable media cartridges, the D5000 Series provides highly flexible, COTS solutions that can easily adapt to the changing requirements of airborne applications. With up to 256 Mbit/s total system data rate, and available with hard drive or solid state media, the cartridges have front mounted IEEE-1394b interfaces allowing rapid post mission verification and download of data. These interfaces allow direct connection between the media cartridge and local or remote ground support equipment, with or without removing the cartridge from the D5000 system. Media can be exchanged in seconds, permitting rapid download and turnround of recording assets with excellent support and security capability. Secure erasure of solid state media is available in line with the standard's requirements.The cartridges also have a high speed SCSI interface that provides output to other Heim IRIG106 Chapter 10 compatible data download and analog replay systems that are fitted with media cartridge receivers. Such systems provide full reconstruction of the original data and digital data transfer as required on the ground.
The D5000 mainframe has three signal module slots that can accommodate any combination of the existing and future D Series signal interface modules, including Analog, MIL 1553, PCM, ARINC429, Ethernet, Voice, Serial, Parallel, Video and others. The D5000 range is further enhanced with new high channel capacity signal modules that can be configured with up to 75 channels in a single mainframe. The user has permanent access to configuration and control functions through front panel controls. The serial remote control and discrete contact interfaces have IRIG106 Chapter 10 compliant protocol and physical connection layout, ensuring that the D5000 can be quickly and reliably connected to compliant ground station systems for configuration, data transfer and media maintenance.
The IRIG106 Chapter 10 standard packet recording system ensures accurate time tagging and consistent channel-to-channel phase relationships. The D5000 Series is complete with integral IRIG time code reader/generator, and can also synchronize to external IRIG and GPS time sources. An external time reference from ground equipment can be uploaded to an independent media cartridge and then transferred to the mainframe when that cartridge is subsequently installed in the mainframe.
The D5000 Series will provide a digital recording replacement for both legacy tape-based video and avionics data acquisition systems, combining both functions into an economical single box solution with greatly enhanced management and correlation of the data during analysis in an IRIG106 Chapter 10 environment.
About Heim Data Systems
Heim Data Systems, Inc., a leading supplier of data acquisition equipment, distributes and supports a wide range of industrial, mobile, portable, airborne and laboratory data acquisition systems. These systems provide high quality, off-the-shelf solutions for stand-alone and computer integrated operation, suitable for flight test, range telemetry and general industrial data acquisition.
The company has supplied data acquisition systems to the US Navy, Air Force and Army for test range and operational applications. Heim Data Systems, Inc. has also equipped the automotive and aerospace industries, including Boeing, Lockheed Martin, Ford, Chrysler and General Motors.
Heim Data Systems, Inc. is part of the Zodiac organization, a global company with interests in the aerospace, marine, telecommunications, electronics and information technology markets.
For more information on Heim Data System's complete product line, contact Ginny Decker, Heim Data Systems, Inc. PO Box N, Belmar, NJ, 07719. Telephone (732) 556-2318, fax (732) 556-2319, visit www.heimdata.com, or email marketing@heimdata.com.
Contacts:
Marketing:
Ginny Decker
USA
Phone: 732-556-2318
FAX: 732-556-2319, E-mail this person
Public Relations:
Gray & Rice Public Relations
Jacquelyn Burbank
USA
Phone: 617-367-0100 ext 155 E-mail this person Company Information: Name: Heim Data Systems, Inc. Address: PO Box N City: Belmar State: NJ ZIP: 07719 Country: USA Phone: 732-556-2318 FAX: 732-556-2319 http://www.heimdata.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
