November 28, 2005 -
Vertical PCI Express(TM) Card-Edge Connectors support backplane designs based on System Host Board Express(TM) PCIe Specification. Connectors at interface between SHB and backplane are defined as x8 and x16 PCIe connectors. Backplane slots that interface with PCI Express peripherals can be supported with x1, x4, x8, or x16 PCIe connector links. Each serial PCIe lane is comprised of differential transmit and receive signal pairs that support 2.5 Gb/s data rate in each direction.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
ETTERS, Pa. (October 27, 2005) - FCI, a leading supplier of connectors and interconnect systems, has developed a broad range of vertical PCI Express(TM) (PCIe(TM)) card-edge connectors to support manufacturers' backplane designs based on the "SHB Express(TM) System Host Board PCI Express Specification" recently adopted by the PCI Industrial Computer Manufacturers Group (PICMG®) as its PICMG 1.3 specification document. The connectors at the interface between the System Host Board (SHB) and backplane are defined as x8 and x16 PCIe connectors. The backplane slots that are designed to interface with PCI Express peripherals can be supported with x1, x4, x8 or x16 PCIe connector links.
"FCI can supply the complete range of PCI Express connector sizes with either through-hole solder-to-board or press-fit termination options," said David Sideck, FCI regional market manager. "Equipment manufacturers may find press-fit termination to offer processing advantages when backplane thicknesses exceed 2.36mm (0.093")."
Solder and press-fit connectors are available in standard x1, x4, x8, or x16 link widths. Each serial PCI Express lane is comprised of differential transmit and receive signal pairs that support 2.5 Gb/s data rate in each direction. All connectors fully support SHB Express or PCI Express signal and power requirements, as well as the auxiliary signals at the interface between the system board and add-in card.
RoHS-compliant connector versions compatible with lead-free soldering temperatures are also available.
Prices for the card-edge connectors are dependent upon connector configuration but are typically less than $0.01 per contact for 2,000 piece order quantities. Samples are available for delivery, with production lead times from stock to six weeks.
For more information about PCI Express Card-Edge connectors, contact FCI at 825 Old Trail Road, Etters, PA 17319-7883; call 800-237-2374, email at electronics.us@fciconnect.com or visit FCI on the web at www.fciconnect.com/pciexpress.
PCI Express and PCIe(TM) are trademarks of PCI-SIG. PICMG® and SHB Express are trademarks of PICMG.
More about
Created in 1989, FCI rapidly secured its place among the world's top three manufacturers of connectors and interconnect systems. With a turnover of 1.29 billion Euros in 2004, FCI currently operates in 30 countries where it covers the following markets: communications, data, consumer, industrial, automotive and electrical power interconnect. The company employs around 13,000 staff worldwide.
Marketing:
David Sideck Regional Market Manager
USA
Phone: 800-237-2374 E-mail this person Company Information: Name: FCI Electronics Address: 825 Old Trail Rd. City: Etters State: PA ZIP: 17319 9769 Country: USA Phone: 800-237-2374 FAX: 717-938-7609 http://www.fciconnect.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
