|
|
|
|
Bit Error Ratio Tester offers jitter tolerance testing.
November 2, 2005 -
Suited for testing serial gigabit devices up to 12.5 Gb/s, Model N4903A provides built-in and calibrated jitter compensation for stressed eye testing of receivers. Automated and compliant jitter-tolerance testing covers all serial bus standards. Unpredictable traffic can be analyzed with bit recovery mode, enabling realistic test scenarios. Unit includes built-in CDR, subrate clock outputs, and spread-spectrum clocking that facilitates clock setup.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.) |
|
|
|
Agilent Technologies Introduces Industry's First High-Performance Serial BERT for Complete Jitter-Tolerance Test
Agilent Technologies Inc. (NYSE: A) today announced the industry's first high-performance serial bit error ratio tester with advanced jitter generation capabilities for jitter-tolerance testing (J-BERT) of serial gigabit devices up to 12.5 Gb/s. The new Agilent N4903A provides the only complete jitter-tolerance test solution for fast, high-quality characterization of next-generation serial devices.
The next generation of high-speed serial bus standards with data rates of 5 Gb/s and beyond is expected by 2006. The increasing speed will cause significant signal integrity and jitter issues during the design and test of next-generation serial bus devices. In addition, new transmission techniques, such as spread spectrum clocking, make device performance characterization more difficult and time-consuming. The Agilent N4903A provides calibrated jitter composition and automated jitter characterization in a single box and is compliant with the latest serial bus standards.
The N4903A provides complete built-in and calibrated jitter composition for stressed eye testing of receivers. Automated and compliant jitter-tolerance testing covers all popular serial bus standards, such as PCI Express, SATA, Fibre Channel, FB-DIMM, CEI, Gigabit Ethernet and XFP.
"Jitter-tolerance testing is the most complex and time-consuming measurement that design teams of next-generation serial devices have to deal with," said Siegfried Gross, vice president and general manager of Agilent's Digital Verification Solutions division. "With the introduction of the first and only complete, one-box jitter-tolerance test solution, Agilent continues to demonstrate its leadership in providing innovative physical layer testers for the computer, storage and networking markets."
The Agilent N4903A high-performance serial BERT includes the following benefits:
-Built-in, calibrated, automated and compliant jitter-tolerance testing with sources for PJ, RJ, BUJ, ISI and sinusoidal interference. This enables fast, high-precision stressed eye testing with more than 50 percent eye closure.
-Fully supports complex data patterns of serial bus interfaces. Unpredictable traffic can be analyzed with the bit recovery mode, enabling more realistic test scenarios. Complex training sequences can be set up with the new pattern sequencer easily, simplifying the test development process.
-Built-in CDR, new subrate clock outputs and spread-spectrum clocking (SSC), which significantly simplify the clock setup.
-Accurate characterization with the cleanest eyes, 20 ps transition times and 50 mV analyzer sensitivity.
U.S Pricing and Availability
The Agilent N4903A high-performance serial BERT is available for order now. Prices start at $120,000 for the 7 Gb/s version and $160,000 for the 12.5 Gb/s version.
More information about the Agilent N4903A is available at www.agilent.com/find/n4903. Photos of the product are available at www.agilent.com/find/n4903_images.
About Agilent Technologies
Agilent Technologies Inc. (NYSE: A) is the world's premier measurement company and a technology leader in communications, electronics, life sciences and chemical analysis. The company's 28,000 employees serve customers in more than 110 countries. Agilent had net revenue of $7.2 billion in fiscal year 2004. Information about Agilent is available on the Web at www.agilent.com.
Contact:
Janet Smith, Agilent
+1 970 679 5397
janet_smith@agilent.com
Contacts:
Public Relations:
Weber Shandwick
Johanna Vallecillo
USA
Phone: 408-530-8400 ext 2232
 E-mail this person
General Information:
Janet Smith
USA
Phone: 970-679-5397
E-mail this person
Company Information:
Name: Agilent Technologies, Inc.
Address: 395 Page Mill Rd., P.O. Box 10395
City: Palo Alto
State: CA
ZIP: 94303
Country: USA
Phone: 877-424-4536
FAX: 650-752-5300
http://www.agilent.com/
|
|
|
|
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
