Archive News Story
(Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Software provides flowmeter programming.
October 4, 2005 -
Designed for turbine flowmeters employing LinearLink® and LinearLink® Temperature Compensated Interface, VisualLink(TM) eliminates need for manual calibration data entry.
With Windows® 2000/XP-based VisualLink software, flow rate data points from FTI .SAV flowmeter calibration files can be uploaded directly to the LinearLink and LinearLink TCI systems. Software also helps users arrange units of measure and header information when programming flow measurement system.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: September 14, 2005
Flow Technology Introduces Visual Link Flowmeter Programing Software
Window®-based solution eliminates manual entry of meter calibration data
PHOENIX, Ariz., Sept. 14, 2005 - Flow Technology, Inc. (FTI), a leading manufacturer of precision flow measurement instruments, systems and calibrators, today announced the release of the VisualLink(TM) flowmeter programming software. Designed for turbine flowmeters employing FTI's high-performance LinearLink® and LinearLink® Temperature Compensated Interface (TCI), the new software simplifies flowmeter programming and eliminates the need for manual calibration data entry.
With the Windows® 2000/XP-based VisualLink software, flow rate data points from FTI .SAV flowmeter calibration files can be uploaded directly to the LinearLink and LinearLink TCI systems. Users are relieved of typing complex calibration information into a personal computer (PC), and then downloading the data to their flowmeter electronics. The software also makes it easy to arrange units of measure and header information when programming a flow measurement system.
According to Flow Technology's product manager, Rex Mann, VisualLink is a valuable, timesaving tool for users of the advanced LinearLink and LinearLink TCI solutions. "The VisualLink software provides greater flexibility for configuring a turbine meter-based system, and does away with programming errors resulting from manual entry of calibration data," said Mann. "On request, Flow Technology customers can receive an electronic .SAV file of their flowmeter calibration data for use with the VisualLink software to program the LinearLink or TCI units. Future plans are to allow customers access to download their flowmeter calibration files directly from
our website. Unlike other manufacturers' programming software, with VisualLink, there's no need to type in a long list of calibration datan points."
Designed for use with all types of turbine flowmeters, the LinearLink is a high-performance system that redefines the methodology for optimum linearization. Based on measuring the time between turbine rotor blades, the LinearLink can output "real-time" corrected K-factor flow data in 10 mS, with an accuracy of +0.1% of reading over the full repeatable range of the flowmeter. This wide turndown is made possible by a unique approach that enhances resolution in the low flow range of the turbine flowmeter where linearization is critical.
The LinearLink TCI represents a new, sophisticated electronics platform for flow meter linearization and viscosity/density correction. Intended to meet the demanding requirements of the aerospace, automotive and process manufacturing industries, the LinearLink TCI provides significant improvements to flowmeter accuracy - even under extreme temperature conditions. Its unique design combines, in a single instrument, temperature compensation with linearization, signal conditioning, user-selectable
outputs and a wide input power voltage range.
The VisualLink flowmeter programming software can be downloaded free of charge from the Flow Technology website (www.ftimeters.com) until April 1, 2006. The software will be available for $100.00 USD following the introductory period.
For more information, go to www.ftimeters.com or call 1-800-356-9328.
About Flow Technology, Inc.
With 50+ years of flow measurement experience, Flow Technology, Inc. maintains the highest standards of quality in its design, manufacturing and service. Its product line includes a wide range of turbine and positive displacement flowmeters, flow calibrators, flow controllers and ancillary electronics. Typical applications are found in the aerospace, automotive, industrial, metrology, oil & gas and sanitary fields. In addition, the company maintains one of the world's largest primary standard flowmeter calibration laboratories, and provides complete flowmeter calibration, service and repair. Flow Technology, Inc. is registered to ISO 9001, and has calibration conformance to MIL-STD-45662A and ANSI Z 540. Visit them at www.ftimeters.com.
Contacts:
Public Relations:
Industrysource
Dave Campbell
1660 S. Alma School Rd, Suite 212
Mesa AZ 85210
USA
Phone: 480-966-7276
FAX: 480-377-6373
General Information:
Ralph Duffill
USA
Phone: 602-437-1315 Company Information: Name: Flow Technology, Inc. Address: 4250 East Broadway Road City: Phoenix State: AZ ZIP: 85040 Country: USA Phone: 602-437-1315 http://www.ftimeters.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
.gif)
