Embedded Computer offers various connectivity options.
September 1, 2005 -
Powered by RISC-based, 266 MHz Intel Xscale IXP-422 processor that consumes less than 2 W, front-end UC-7408 has fanless design with 8 digital I/O channels, 8 RS-232/422/485 serial ports, dual 10/100 Mbps LAN ports, and CF expansion slot. Wireless-ready (PCMCIA) product can be used for on/off event handling and comes with pre-configured Linux OS with optimized onboard device drivers. Unit also features on-board 128 Mb RAM and 32 Mb Flash disk.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Taipei, Taiwan, May 6, 2005-The newest member of our "Embedded Computer Force" will be ready to ship in September. UC-7408 is an Intel Xscale RISC based, front-end embedded computer with a robust, fanless, and low power consumption design. UC-7408 features 8 digital input and 8 digital output channels, 8 RS-232/422/485 serial ports, dual 10/100 Mbps Ethernet, PCMCIA, and CF expansion slot.
8-ch digital input / 8-ch digital output
The new DI/DO feature of UC-7408 provides users with the convenience of connecting their digital devices to a front-end embedded computer. UC-7408 can be used for on/off event handling by reading the state change of the digital input signal. Output signals from external digital devices can be imported into UC-7408's DI channels. UC-7408 can be programmed to take immediate action when it detects a change in the signal state.
The DO channels on UC-7408 can connect to devices and trigger digital output signals to control external digital devices. The new DI/DO feature will let Moxa embedded computers support both data acquisition and protocol conversion via the RS-232/422/485 serial ports, and simple I/O control with the DI/DO signal.
UC-7408 is ideally suited for industrial automation, manufacturing, and applications that integrate serial communication and digital I/O signal control.
Linux ready platform
UC-7408 comes with a Linux ready platform that has a pre-configured Linux OS with optimized onboard device drivers. Linux's open software architecture is good for developing application software. Linux provides the system integrator and programmer with the option of developing their own application programs, and software written for desktop PCs can be easily ported to the UC-7408 platform by using a GNU cross compiler, without needing to modify the code.
Powerful and Fanless
The ultra low power consumption CPU (less than 2W) makes UC-7408 a high performance device that won't overheat.
Dual 10/100 Mbps LAN ports
The 2 LAN ports with built-in IXP-422 provide you with a more reliable redundant network application, and hardware encryption (DES, 3DES, AES, etc.) gives your applications better security protection and higher performance.
8 RS-232/422/485 3-in-1 serial ports
The UC-7408 Series comes equipped with 8 RS-232/422/485 3-in-1 software configurable serial ports for various device connections, giving you an ample number of serial ports for any application.
Robust design for harsh environments
UC-7408 uses an on-board flash for storage and CF for storage expansion, and with the RISC IXP-422 CPU, which generates almost no heat, no fan is needed to cool down the system, providing you with a more reliable system.
Wireless Expandability
With UC-7408's wireless-ready design, just add the wireless PCMCIA card to make use of the wireless connection, both 802.11b and 802.11g are supported letting you eliminate the complications of using wired network connections.
Features
· Intel Xscale IXP-422 266 MHz Processor
· On-board 128 MB RAM, 32 MB Flash Disk
· Eight RS-232/422/485 serial ports
· 8-ch digital input, 8-ch digital output (TTL level)
· Dual 10/100 Mbps Ethernet
· Optional PCMCIA/CompactFlash/Wireless LAN expansion
· Linux-ready communication platform
· Wall mounting installation
· Robust fanless design.
Moxa Technologies is part of the Moxa Group, a conglomerate that manufactures device networking products for industrial automation. Information about all Moxa products, which include industrial Ethernet switches, serial device servers, multiport serial cards, and embedded device servers, is available on the Moxa Group's corporate website at www.moxa.com. You may also contact Moxa Technologies directly by email at info@moxa.com.tw, or by phoning +886 (2) 8919-1230.
The MOXA logo is a registered trademark of the Moxa Group. All other trademarks mentioned in this document are the property of their respective owners.
Contacts:
General Information:
Terry Chen
USA
Phone: 886-2-89191230 ext 216 E-mail this person Company Information: Name: Moxa Inc. Address: 3001 Enterprise St. #210 City: Brea State: CA ZIP: 92821 Country: USA Phone: 714-528-6777 FAX: 714-528-6778 http://www.moxa.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
