Archive News Story
(Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Data Acquisition/Processing Board has 2 GHz sampling rate.
May 31, 2005 - Capable of single- or 2-channel data acquisition, Model 6826 VME A/D converter board utilizes 10-bit Atmel AT84AS008 ADCs and configurable Xilinx Virtex-II Pro FPGA with 11 million gates. It accepts single-ended or differential inputs and digitizes signal bandwidths to 900 MHz. Along with two 64-bit DDR SDRAMs that provide up to 1 Gb of memory, unit features 16 Mb Flash memory, multiple I/O channels, FPDP-II data ports, and serial switched-fabric VXS connections.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: May 16, 2005
Pentek Announces Blazingly Fast Data-Capture and Processing Board with 2 GHz Sampling Rate
Military Embedded Electronics & Computing Conference Hyatt Regency
May 16-17, 2005
· Dual Atmel AT84AS008 10-bit ADCs
· On-Board User-Configurable Xilinx Virtex-II Pro FPGA with 11 Million Gates
· Highly Optimized GateFlow FPGA IP Cores and Design Kit
· Up to 1 GB DDR SDRAM, 16 MB Flash
· Multiple High-Speed FPDP and VXS I/O Ports
· Multiboard Synchronization
LONG BEACH, CA-May 16, 2005-Pentek customers can now boost signal bandwidth by nearly an order of magnitude with the release of the Model 6826 VME A/D Converter board. The Model 6826 features single- or dual-channel data acquisition at a blazing 2 GHz samples/second with 10-bit resolution using the new Atmel AT84AS008 A/D device. The board’s ability to accept either single-ended or differential inputs preserves signal integrity across a variety of analog signal sources.
“For our customers, this product opens up a whole new range of previously unavailable frequencies and applications,” said Rodger Hosking, vice president of Pentek, Inc. “It allows them to directly digitize signal bandwidths up to nearly 900 MHz, so they can capture wideband radar and communication signals as a single channel instead of digitizing several smaller bandwidth slices. The inclusion of the Virtex-II Pro FPGA is essential for processing these large bandwidth signals to extract information and reduce the data rates to a manageable level within the system.”
"We are pleased Pentek has chosen Atmel's new 10-bit 2.2 GHz A/D chip for their new Model 6826," said Ron Duda, North America marketing manager for Atmel's Hi-Rel product line. "The AT84AS008 combines dynamic performance, compactness and ease-of-use, allowing improved system-development speed on Pentek's high-performance VME board."
On-Board Signal Processing
With a density equivalent of more than 11 million system gates, the Xilinx XC2VP100 Virtex-II Pro FPGA offers a powerful signal-processing resource for the formidable stream of data from the A/D converters. On-board logic first de-multiplexes the 2 GHz raw 10-bit A/D samples by a factor of eight, producing 80-bit words at a reduced rate of 250 MHz for successful delivery into the FPGA. The FPGA then performs various standard functions on the data, including memory transfers, formatting, triggering, gating and delivery to FPDP and VMEbus interfaces. It also handles the switched serial fabric VXS interface using the on-chip RocketIO gigabit serial transceivers.
Since most of the logic and DSP resources remain unused for these factory functions, developers can take advantage of these parallel processing structures to implement custom signal-processing algorithms and process captured data in real time. To simplify FPGA development tasks, Pentek offers its GateFlow FPGA Resources, including the GateFlow FPGA Design Kit, GateFlow IP Cores Libraries and GateFlow Factory Installed IP Cores. In addition, Pentek’s ReadyFlow libraries allow the user to control the Model 6826 across the backplane from SBC and DSP boards through high-level C-callable commands.
Extensive Memory Supports Transient Capture and Buffering
The Model 6826 also features extensive memory resources. Dual 64-bit high-speed DDR SDRAMs provide a total of 512 MB or 1 GB of memory to store raw data in transient-capture mode. The memory can also be used as an elastic buffer for storing burst signals like radar pulses in real time and subsequent delivery to the I/O interfaces at a lower continuous rate. Custom FPGA configurations can take advantage of this large memory for more complex applications. Flash memory of 16 MB allows boot code storage for the two IBM 405 PowerPC micro-controller cores within the FPGA.
Wideband Output Interface Options
To support high-bandwidth data capture, the board includes several high-speed I/O channels to move the raw data off-board for storage or processing. Two or four channels of FPDP-II data ports, operating at up to 400 MB/second each, deliver processed and de-multiplexed data through legacy connections to other VME cards. In addition, the board offers two serial switched-fabric VXS connections, each running full-duplex at 1.25 GB/second to support the new Xilinx Aurora, Serial RapidIO and PCI Express protocols. LVDS I/O is also available on either front or rear panel connections.
Pricing & Availability
The single-channel version of the Model 6826 starts at $15,695 US, with availability starting at 14 to 16 weeks ARO. For more information on the Model 6826, visit Pentek’s website at www.pentek.com/whatsnew/WhatsNew.cfm.
About Pentek
Pentek develops, manufactures and markets innovative Digital Signal Processing, Software Radio and Data Acquisition boards and systems to distributors, systems integrators and value-added resellers. Pentek offers powerful VME, VXS, PMC, XMC and cPCI boards and systems featuring Texas Instruments C6000 DSPs, Motorola G4 PowerPCs and Xilinx FPGAs. Pentek's I/O includes A/Ds, D/As, digital receivers and upconverters and more. Pentek equips products with high-performance interfaces including gigabit serial links, RACE++ and FPDP-II and offers strong DSP software support.
Pentek, ReadyFlow and GateFlow are registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; telephone 201-818-5900, ext. 756; fax 201-818-5904; email news@pentek.com, website www.pentek.com.
International Sales Contacts: VSystems SA in France at 13007 0060, VSystems Electronic GmbH in Germany at 89 273 7630, VSystems s.r.l. in
Italy at 11.966 1319, VSystems Scandinavia in Sweden at 8 444 15 50, VSystems UK at 1494 476000, WTI in Israel at 99-563163 and MISH International in Japan at 42-538-7650.
Contacts:
Sales:
Mario Schiavone
USA
Phone: 201-818-5900 ext 756
FAX: 201-818-5904 E-mail this person
Public Relations:
Patterson & Associates
Beverly Wykoff
9549 E. Covey Trail
Scottsdale AZ 85262
USA
Phone: 480-488-6909
FAX: 480-488-8909 E-mail this person Company Information: Name: Pentek Inc. Address: 1 Park Way City: Upper Saddle River State: NJ ZIP: 07458 Country: USA Phone: 201-818-5900 FAX: 201-818-5904 http://www.pentek.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
