Archive News Story
(Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Dot Meters capture and adjust images with one button.
May 26, 2005 - Equipped with ccDot engine and graphic display, X-RiteDot portable dot-analysis instruments provide digital screen ruling assessment, on-board video dot magnification, and dot shape analysis on any media. They adjust for plate background image and feature 14,000 dpi optics. This allows measurement of AM amplitude modulated screens from 85–250 LPI as well as FM frequency modulated screens as fine as 20 microns. Models include BASICDOT, PLATEDOT, COMBODOT, and PRINTDOT.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: May 1, 2005
COMBODOT Meter
DOT METERS
X-RiteDot is a line of portable dot-analysis instruments that provide digital screen ruling assessment, on-board video dot magnification, and dot shape analysis on almost any media. X-RiteDot provides operators with the most accurate solution for evaluating dot percent, resulting in quality and consistency in the imaging workflow.
Better dots make better reproductions. And with X-RiteDot™ meters, you can get the most out of your conventional or CTP imaging workflow, with confidence in plates, film and proofs.
Go Beyond Accurate
The X-RiteDot meters go beyond densitometry to provide the industry-certified most accurate solution for evaluating dot percent, resulting in quality and consistency on press.
With the industry-leading ccDot engine, the X-RiteDot lineup brings valued X-Rite service, reputation and strength to the area of dot analysis. Accurate feedback on dot size, digitally-accurate screen ruling assessment, on-board video dot magnification and dot shape analysis yield an unbeatable solution in dot measurement.
Complete Line of Dot Technologies
What if the same accurate dot evaluation used to produce the industry-leading plate dot meter could be used to measure halftone films, or even digital or contact proofs? Well now it can be.
With the X-Rite ComboDot you can accurately analyze the exact screen percentage of any hard-dot or soft-dot film on any light table. And to complete the picture, ComboDot includes a separate density head and transmission base for conventional film density measurements.
X-Rite PrintDot yields accurate physical dot size measurements from comps, proofs, or press prints, further extending the reach of accurate dot validation. Use it to calibrate conventional or digital proofing solutions, to accurately evaluate customer-supplied materials, or to document data and digital pictures that confirm the visual image you see in a magnifying loupe.
Simple To Use
A simple, single button press is all that is required to capture images or make measurements of any dot image, on prints, plates or films. The graphical menu provides easy, quick and simple access to the wide range of enhanced features of the X-RiteDot line—ensuring that any operator is able to make measurements with a minimum of training.
No User Calibration
The X-RiteDot line was engineered with a simple design concept that adjusts for the plate background image automatically. This means that not only are measurements faster but also more accurate—reducing user errors that can be common with competitive solutions. X-RiteDot is simple, just aim and measure.
Easy To Enhance
Users can easily upgrade X-RiteDot models to add more features as their needs grow, all without the need to return it to the factory. Enhancements are made via a simple user entered keycode to unlock features.
Unparalleled Accuracy
The X-RiteDot product line features high-resolution 14,000 dpi optics. This allows measurement of standard (AM amplitude modulated) screens from 85-250 LPI as well as stochastic (FM frequency modulated) screens as fine as 20 microns. In addition, the unique view-through aperture offers the most convenient and accurate placement, ensuring you get a quality measured result.
Advanced Display
X-RiteDot meters offer a large format, easy-to-read, graphic display which offers a variety of information at the touch of a button. Easily view data including percentage dot, screen ruling or screen angle data. Switch to video mode and view real dot shapes and patterns.
You can even magnify the image to view misshapen dots or artifacts—the true alternative to a magnifying loupe. You can also save reference images for later review or for transfer to a computer for further use.
KEY FEATURES:
•Connect Mac/PC to share data/images
•Easy to use, full-size graphic display, graphical user interface, auto-calibrating
•Accurate dot on films, plates and prints
•WYSIWYG viewing for accurate position
•Fully upgradeable – add new features
•Data set storage for press/proof curves
BASICDOT
X-Rite’s entry-level dot meter for evaluating printing plates with blue or green emulsions. Rated most accurate plate measurement solution by GATF - recommended by leading plate and platesetter manufacturers
• Full upgrades via keycode - add FM functionality, film capability and more
• Verify CTP or conventional plates with reliability, ease and accuracy
• Upload data and video images to PC or Macintosh with optional software
INSTRUMENT ATTRIBUTES
Primary Application: Blue, Green Plates
Screen Ruling (min/max): 85 lpi to 250 lpi
Stochastic Capable: No
Minimum Dot Size (microns): NA
PLATEDOT
X-Rite’s accurate meter for evaluating dot size, line ruling and screen angle on printing plates with any color emulsion.
• Standard level solution for simple dot evaluation on any color litho plate
• Auto calibration direct sample viewing
• Send data or video frames to your Macintosh or PC with optional software
• Upgrade to add the stochastic/FM feature or other capabilities
INSTRUMENT ATTRIBUTES
Primary Application: Offset Plates
Screen Ruling (min/max): 85 lpi to 250 lpi
Stochastic Capable: No
Minimum Dot Size (microns): NA
COMBODOT
Accurately evaluates halftone film dot area and density as well as dot size, line ruling and screen angle on printing plates of any color.
• Combined solution for dot and film measurement on any color litho plate
• Quickly and easily evaluate plates and films for dot, screen ruling and angle
• Add capability to measure prints and proofs with an upgrade via key codes
• Calibrate both your platesetter and your imagesetter
• Measure stochastic films and plates with optional FM feature
INSTRUMENT ATTRIBUTES
Primary Application: Plates, HT Films
Also Can Read: Density (D-Max)
Screen Ruling (min/max): 85 lpi to 250 lpi
Stochastic Capable: No
Minimum Dot Size (microns): NA
PRINTDOT
X-Rite’s multi-function dot meter for accurately evaluating dot size on a variety of graphic arts media including prints, film and plates with any emulsion color.
• Measure precise dot area, angle and line screen ruling in your printing process - film, plates, proofs and pressrun
• Simple icon-driven menu and self-calibration feature
• Capture data and video frame images of any media, and upload to PC or Macintosh (optional feature)
• Document plate, proof or print problems to share with management, vendors and customers
• With our best-of-class 14,000 DPI resolution measure FM/stochastic plates and films with our optional FM upgrade
INSTRUMENT ATTRIBUTES
Primary Application: Proof Calibration
Also Can Read: Plates, HT Films
Screen Ruling (min/max): 85 lpi to 250 lpi
Stochastic Capable: No
Minimum Dot Size (microns): NA
ALL MODEL SPECIFICATIONS:
Technology
14,000 dpi CCD array
Optional FM mode for stochastic materials
Aperture Size
1 mm
Optical Range
85 to 250 lpi
Illumination
Transmission base std. on ComboDot
Red LED std. on BasicDot
RGB LED std. on PlateDot, PrintDot and ComboDot
Data Storage
32 values with data option
Measurement Time
2 seconds
Warm-up Time
None
Accuracy
+/- 1% dot
Display
Numeric display
Optional graphic display with image view and zoom
Data Connection
Serial connection
Mini-DIN Mac serial adapter optional
USB adapter optional
Power Source
Rechargeable battery pack
Switching power supply (100V AC to 240V AC)
Charge Time
Up to 14 hours for full charge, first time use
Physical Dimensions
Height: 5.4 cm (2.125 in)
Width: 9.5 cm (3.75 in)
Length: 26 cm (10.25 in)
Weight
540 g (1.2 lbs)
Software
Video option includes ImageLink software for image exchange with PC/Mac
Data option includes KeyMagic software for data exchange with PC/Mac
INCLUDES
12 month warranty
DB9 serial interface cable
Optional annual service contract
Storage case
Complete documentationCompany Information: Name: UV Process Supply, Inc. Address: 1229 W. Cortland City: Chicago State: IL ZIP: 60614-4805 Country: USA Phone: 773-248-0099 FAX: 773-880-6647 http://www.uvprocess.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
