Video Security System offers BS8418-driven features.
May 26, 2005 -
ADPRO FastTrace Multi-Site Video Security System and Video Central CMS software, offers preset on alarm, zone isolation, and total system integrity. It delivers remote access of live events and instant retrieval of images from 120-day video archive of 20 cameras at rate of 1 ips. Image capture programming compensates for time dome takes to move to preset position, while serial poll signal extends ability to detect interference beyond scope of terminal adapter.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Vision Systems Launches ADPRO FastTrace Version 2.0 with Innovative BS8418-Driven Features
(Hemel Hempstead, March 2005). Vision Systems has launched an enhanced version of its award-winning ADPRO FastTrace Multi-Site Video Security System and Video Central CMS software- a secure, cost-effective and reliable remote off-site video transmission and verification solution - in line with BS8418 that sets new rules for remote monitoring stations and installers in relation to the quality of technology deployed in monitored CCTV installations.
The new British Standard provides clear guidance in regards to the correct positioning and configuration of detectors, cameras, lighting and audio equipment, and minimum performance requirements of any technology specified.
New features for the ADPRO FastTrace Version 2.0 including 'Preset on Alarm', 'Zone Isolation', and Total Systems Integrity' have been developed to meet the Standard's strict guidelines in relation to tamper, video integrity, control equipment integrity, communication integrity, and a host of procedures relating to video storage and retrieval.
ADPRO FastTrace Version 2.0 is described as a superior product for evidential quality recording that delivers rapid remote access of live events and instant retrieval of stored images. With intelligent, interactive management software and advanced compression algorithm capability, ADPRO FastTrace provides up to 120 days storage of archived video at 1 ips on up to 20 cameras without compromising image quality.
New features based around 'presets' include 'Preset on Alarm', where for every alarm input, ADPRO FastTrace can now automatically determine which preset/which dome the signal should be sent to. As Jeff Kitching, Sales Manager, for ADPRO explains: "Currently, an installation requires a separate matrix and alarm input board for each dome with all of the additional cabling and wiring that is required, and the commensurate cost. Now it's just a case of programming the ADPRO FastTrace to do it."
"With BS8418 placing greater emphasis on tracing and auditing alarms, this new feature instantly shows which detector is in alarm, from which camera, its position, etc. making the whole process more immediately transparent."
A further feature is the ability to program the device to disable preset event response on a selected camera. "There is the issue at the moment," Jeff Kitching continues, "where an RVRC operator may be looking at an incident from an alarm, and then another preset comes in and is instantly displayed, distracting the operator from the original incident. This new feature puts the operator in control. He is still aware when another preset alarm is activated (it is flagged on screen) but can decide whether to stay with the incident he is already viewing, or go to the next preset."
The ADPRO FastTrace Version 2.0 can also be programmed to capture images clearly by taking into account the time a dome takes to move to its preset position. "If snapshots are taken whilst the camera is moving, the images are obviously blurred," Jeff says. "The new ADPRO FastTrace can be programmed to delay capturing an image for a fraction of a second to allow the camera to be in the correct position and therefore providing clear images from the required event."
In terms of communications, Version 2.0 has been further enhanced with the addition of a secondary back-up channel if the primary signal fails. The introduction of a Serial Poll signal (from the ADPRO FastTrace) extends the ability to detect interference beyond the usual scope of a RedCare line - ie. at the terminal adapter - as Jeff continues: "There is now nothing that can happen on site in terms of communications without the RVRC being aware," he says, "whether there's a power drop-off, a line being cut or the terminal adapter going down, the new ADPRO FastTrace provides Total System Integrity."
As well as providing integrity across ISDN and PSTN, an innovative feature also enables systems using ADSL to remain secure. "For sites using ADSL, FastTrace sends a 'Site Pulse' (in this case a proprietary signal) to the central station at regular intervals (fully configurable dependant upon level of security required). If the pulse is not detected, then the likelihood is that communication may have been lost and the appropriate action can therefore be taken."
Other new enhancements include 'Zone Isolation', allowing the operator to quickly and easily isolate individual zones without having to drill down into a complicated menu. Zones such as alarm inputs, tamper detect, video loss, VMD, contrast, etc. can be easily isolated, with prompts to ensure that zones are re-instated once the underlying site issue is resolved and not overlooked.
Detailed logging of all site actions, including alarm activity, connection attempts, arming/disarming plus many more have all been included. This is in line with the BS8418 requirement that states that a log must be maintained for all activations on site and stored for up to six months. The ADPRO FastTrace will store up to 12 months' worth of alarm activations from a typical site.
Additional features including tamper detection on alarm inputs, entry/exit paths, an event replay capability, dual path signaling, and remote state logging (including monitoring the temperature and operational state of the hard drive) all enhance the operational functionality. ADPRO FastTrace also allows multiple users to a single unit for viewing / review purposes, however alarm activity can be given priority with all communications being over-ridden in the event of an alarm activation in favor of the central station.
The ADPRO FastTrace is specifically designed for a diverse range of high security, multiple site industries that require centralized security and surveillance management, such as banks, utilities, telcos, retail sites, and transportation.
About Vision Systems:
Vision Systems is a global leader in very early warning smoke detection, voice alarm and remote CCTV security surveillance solutions which protects business-critical assets across the world. Vision Systems operates a global network of companies in Australia, Asia, Europe and the Americas. Products include:
Integrated Security and Surveillance Solutions
With advanced remote surveillance and alarm handling functionality including voice integration, ADPRO offers
innovative security solutions ideal for remote CCTV surveillance and perimeter protection.
Aspirating Smoke Detection Systems
Recognized as the global market leader in early warning smoke detection, VESDA's aspirating smoke detection systems is ideal for mission critical applications, high airflow applications, inaccessible areas, large open spaces and offers a unobtrusive detection fora wide range of vertical markets, including telecommunications, transportation, manufacturing, utilities and storage services.
CONTACT: Vision Systems
700 Longwater Drive
Norwell, MA 02061
Caterina R. Tabor
Marketing Manager
781.740.2223
Cathy.Tabor@visionusa.com
Contacts:
Marketing:
Caterina R. Tabor Marketing Manager
USA
Phone: 781-740-2223 E-mail this person Company Information: Name: Xtralis Inc. Address: 700 Longwater Dr. City: Norwell State: MA ZIP: 02061 Country: USA Phone: 781-740-2223 FAX: 781-740-4433 http://www.vision-fs.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
