Archive News Story
(Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Golf Car utilizes 1.8 kW alkaline fuel cell generator.
December 24, 2004 - Freedom II, powered by Model E7 AFC Generator, runs smoothly and silently and can be refueled in minutes. Generator is fueled by 33 L carbon fiber cylinder of compressed hydrogen and can operate for over 3 days between refills. Emission-free generator contains two 900 W POWERSTACK MC250 alkaline fuel cell stacks and can deliver 20% overload factor for acceleration and hill climbing. With curb weight of 760 lb, car has cruising speed of 17–19 mph.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: December 16, 2004
Astris Energi Doubles Golf Car Power with New E7 Alkaline Fuel Cell Generator
MISSISSAUGA, ONTARIO, CANADA, December 16, 2004 -- Astris Energi Inc. (OTC Bulletin Board - ASRNF), the world's leading alkaline fuel cell (AFC) technology company, announced today that it had completed work on Freedom II, its second-generation golf car. The new, faster golf car is powered by Astris' recently completed 1.8kW, Model E7 AFC Generator, which gives Freedom II double the power and double the acceleration of the original model which was the world's first alkaline fuel cell powered golf car using hydrogen.
Freedom II has a curb weight of 345 kg (760 lbs.), approximately 20% lighter than an equivalent electric battery model. It has the best characteristics of existing golf car technology with none of the disadvantages. It runs smoothly and silently, like an electric golf car, and can be refuelled in minutes, just like a gasoline model. Freedom II's E7 Generator is fuelled by a 33-litre, carbon fibre cylinder of compressed hydrogen. Under typical usage, Freedom II can operate for over three days between refills. The new, silent running, emission-free E7 Generator contains two 900W Astris' POWERSTACK MC250 alkaline fuel cell stacks giving the unit 1.8kW nominal power. With the capability to deliver a 20% overload factor provides more than sufficient power for peak loads such as acceleration and hill climbing. The E7 Generator gives Freedom II a cruising speed of approximately 27-31 kph (17-19 mph) and since alkaline fuel cells keep the voltage supply at a constant level there is no "fading away", a familiar and unwanted characteristic of battery-powered golf cars.
Astris will be demonstrating Freedom II and its E7 AFC Generator to a variety of potential end users. As well as being a marketable product in its own right, Freedom II provides a practical demonstration of the capabilities of the Model E7, which was developed as a direct replacement for existing traction batteries. Thus the E7 can be used not only in golf cars, but also in a wide variety of mobile applications such as neighbourhood electric vehicles, boats, and forklifts.
"The installation of our E7 Generator in Freedom II is a good example of the practicality of our AFC technology," said Jiri K. Nor, President and CEO. "We've taken an existing piece of hardware - a standard golf car - and with installation of our leading E7 power unit, turned it into a high performing, efficient vehicle capable of years of reliable service."
About Astris Energi Inc.
Astris is a late-stage development company committed to becoming the leading provider of affordable fuel cells and fuel cell generators internationally. Over the past 21 years, more than $17 million has been spent to develop Astris' alkaline fuel cell for commercial applications. Astris is commencing pilot production of its POWERSTACK MC250 technology in 2004. Astris is the only publicly traded company in North America focused exclusively on the alkaline fuel cell. Additional information is also available at the company's website at www.astris.ca. Company Information: Name: Astris Energi Inc. Address: 2175-6 dunwin drive City: mississauga ZIP: L5L1X2 Country: Canada Phone: 905-608-2000 FAX: 908-608-8222 http:///www.astrisfuelcell.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
