Archive News Story
(Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Cartesian Robots designed for multi-axis applications.
December 19, 2003 - CMS Cartesian Motion System consists of pre-configured Cartesian Robots in 1, 2, or 3 axes. It handles payloads up to 25 kg, speeds to 1.0 m/s, and acceleration rates up to 15 m/s². Depending on chosen axis combination and size, motion system can execute strokes up to 1000 mm in X axis, 700 mm in Y axis, and 800 mm in Z axis. Compact modules are driven by ECODRIVE Cs servo drives with power rating of 400 and/or 750 W. System is suited for pick-and-place applications.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: December 17, 2003
CMS Cartesian Motion System Simplifies Multi-axis Applications
Pre-configured Cartesian Motion Systems save time and money
Company to display its CMS Cartesian Motion System at the 2003
Assembly Technology Exposition, September 23-25, 2003, at the Donald E. Stephens Convention Center in Chicago, Booth #s 18005 and 18017.
The new CMS Cartesian Motion System from Rexroth cuts specification, design and installation time in pick-and-place and
other handling applications.
Charlotte, NC-To help integrators, OEMs and end users reduce the time required to specify, design and install multi-axis systems, Bosch Rexroth has introduced its new Cartesian Motion System (CMS): pre-configured Cartesian Robots in 1, 2, or 3 axes. The new CMS offering uses standard Compact Modules and servo drives from Rexroth, and can be ordered completely pre-assembled or as a ready-to-assemble kit.
Comprising up to three axes, the CMS is designed for payloads up to 25 kg, speeds up to 1.0 m/s, and acceleration rates up to 15 m/s². Depending on the chosen axis combination and size, the motion system can execute strokes up to 1000 mm in the X axis, 700 mm in the Y axis, and 800 mm in the Z axis. The range of motion provided makes the new system ideal for pick-and-place applications in assembly cells and at transfer stations, as well as for packaging and other handling applications.
Rexroth's CMS combines Compact Modules with mounting brackets, servomotors, controllers, cables, cable management and other necessary components to form a complete, ready-to-install handling system with a variety of communication interfaces. The system is pre-parameterized, so it is ready to "plug and play" into the customer's application, resulting in considerable installation and debugging time reductions. To save additional time in the project engineering and design phase, Rexroth also offers a new 3D CAD Generator.
The customer simply chooses the desired configuration and the preferred file format, and a link to the 3-D CMS drawing is provided immediately, so the customer can download it at his convenience.
Internal Rexroth Linear Motion Components ensure optimum performance
Compact Modules and their accessories have proven themselves in the field as low-maintenance technology offering excellent performance characteristics. The CKK Compact Modules used in the CMS consist of an extremely compact frame made of precision extruded aluminum with an aluminum cover and a polyurethane sealing strip to protect the internal components. Two integrated Ball Rail* systems, a high-precision ball screw with large screw diameters and leads, as well as double floating bearings have been tested for long service life and offer the dual benefit of high travel speeds and precision.
Servo drives with a variety of field bus connections
The Compact Modules are driven by Rexroth ECODRIVE Cs servo drives with a power rating of 400 and/or 750 W. These economical drives will operate from 1 and 3-phase supply networks with an input power of up to 230 V. The maintenance-free, highly dynamic motors are available in two frame sizes. The high power density within a compact envelope - short overall length and minimized motor mount dimensions - is optimally matched to the Rexroth Compact Modules. The high IP65 protection rating allows the motors to be used in widely varying process conditions. Equipped with command communication modules like the SERCOS interface, Profibus DP, CANopen or DeviceNet, the Rexroth controllers integrate easily into different automation concepts. Thanks to their open interfaces and UL certification for the U.S. market, the drives can be used anywvhere in the world. Rexroth's global presence guarantees local support for all users.
Bosch Rexroth Corporation, a merger of Bosch Automation Technology and Rexroth, is a wholly owned subsidiary of Robert Bosch GmbH. In the year 2002, Bosch Rexroth AG had total revenues of approximately $3.89 billion (3.62 billion Euros) and a worldwide total of around 26,000 employees. In the Americas, Bosch Rexroth had total revenues of $795 million and about 3,000 employees in 2002.
Business units include Industrial Hydraulics, Electric Drives and Controls, Linear Motion and Assembly Technologies, Pneumatics, Service Automation and Mobile Hydraulics. Bosch Rexroth, The Drive & Control Company, offers comprehensive solutions for drives and motion control in 80 countries around the world.
Bosch Rexroth Corporation
Kevin Gingerich
14001 South Lakes Drive
Charlotte, NC 28273
Telephone (800) 438-5983
Fax (704) 583-0523
kevin.gingerich@boschrexroth-us.com
Contacts:
Public Relations:
Godfrey Public Relations
J. Leigh Brown
40 N. Christian St.
Lancaster PA 17602
USA
Phone: 717-393-3831
FAX: 717-393-1403 E-mail this person
General Information:
Bosch Rexroth Corporation
Kevin Gingerich
14001 South Lakes Drive
Charlotte NC 28273
USA
Phone: 800-438-5983
FAX: 704-583-0523 E-mail this person Company Information: Name: Bosch Rexroth Corp., Pneumatics Div. Address: 1953 Mercer Rd. City: Lexington State: KY ZIP: 40511 Country: USA Phone: 859-254-8031 FAX: 859-281-3491 http://www.us.rexroth.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
