Archive News Story
(Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Processor Blade supports AdvancedTCA platforms.
October 28, 2003 - Suited for carrier-grade solutions, ATC-4130 is based on Intel® E7501 Chipset with 400 MHz front-side bus, utilizes 2.0 GHz LV Intel Xeon® Processor, and is compliant with PICMG® 3.0/3.1 specifications for AdvancedTCA platforms. System memory of up to 4 GB is supported via 2 ECC-protected DDR SDRAM modules. Unit uses Pigeon Point's management architecture, and offers 10/100 Ethernet, serial, USB, and IDE ports.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: October 14, 2003
DTI Introduces AdvancedTCA Processor Blade to Support Next Generation Networks
ATC-4130 Processor Blade available for Telco Equipment Manufacturers developing AdvancedTCA (ATCA) Platforms
RIDGELAND, MS - October 14, 2003 - Diversified Technology, Inc. announced today the release of the ATC-4130 Processor Blade for carrier grade solutions. The ATC-4130 Processor Blade is based on the Intel® E7501 Chipset and utilizes the LV Intel® Xeon® Processor. The board is compliant with the PICMG® 3.0/3.1 specifications for AdvancedTCA platforms.
"DTI's commitment to the Telco market is reflected in the early adoption of the ATCA standard and delivering a high-end processing solution based on Intel® embedded silicon," commented Joe McDevitt, DTI's Hardware Engineering Manager. "TEMS now have the ability to focus on their applications with DTI's ATCA processing solution addressing the processing, power management and shelf management for the core hardware portion."
DTI is also scheduled to release three additional ATCA boards supporting the processing, switch and storage requirements of an ATCA-based telecom system. The ATC-4130 / NAS Blade, and ATS-1136 GigE and Switch Blade are also targeted for a second quarter 2004 release.
About the ATC-4130
The ATC-4130 features Intel's low voltage, high performance Xeon Processor with speeds up to 2.0 GHz; and Intel's E7501 Chipset, providing a 400MHz front side bus. System memory of up to 4GB is supported via two ECC-protected double-date-rate (DDR) SDRAM memory modules. Onboard integration features two 64-bit/66Mhz PMC sites with PCI-X compliancy, two Gigabyte Ethernet base channels, Gigabyte Ethernet Expansion Fabric (ATCA 3.1, Option 1) front panel 10/100 Ethernet port for debug, front panel serial port, two USB ports and five IDE Ports supporting up to 400GB of storage.
The ATC-4130 Processor Blade uses Pigeon Point's management architecture; which has been very successfully tested at the PICMG ATCA Alpha Interoperability Workshops.
Availability
Production shipments begin in Q2/2004. Development units will be available through DTI's beta program in December 2003.
About Diversified Technology, Inc.
Diversified Technology, Inc., an Ergon Company, was founded in 1971 and is a leading designer and manufacturer of standard and custom single board computers, platforms and systems for the embedded market. A silver member of Intel's Communications Alliance, DTI is an ISO 9001 certified company. DTI is a leader in the development and manufacture of IBM compatible computer boards, systems, and products for next generation Internet/Intranet, communications, industrial automation, medical, military/aerospace, and transaction terminal applications.
Diversified Technology is an Associate Member with the Intel® Communications Alliance, a community of communications and embedded developers and solution providers. For more information, please visit www.intel.com/go/ica.Company Information: Name: Diversified Technology Inc. Address: 476 Highland Colony Pkwy. City: Ridgeland State: MS ZIP: 39157 Country: USA Phone: 601-856-4121 FAX: 601-898-4185
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
