Archive News Story
(Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Plate Compactors offer thumb-tip operation.
May 24, 2002 - Model BPR65/52D-3 delivers 14,625 lbs of centrifugal force at 4,380 vibrations per minute. Powered by 10.2 HP, air-cooled Hatz 1D50 diesel engine, it reaches working speeds of 78.7 ft/min. Model BPR75/60HD-3 provides 13,950 lbs of centrifugal force at 2,280 vibrations per minute. Powered by 14.3 HP, air-cooled Hatz 1D81Z diesel engine, it reaches working speeds of 82 ft/min. Both reversible plate compactors are available with hydraulic travel control.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: May 2, 2002
BOMAG Introduces New Reversible Plate Compactors with Hydraulic Travel Control and Exclusive Thumb-Tip Operation
KEWANEE, Ill. - BOMAG Light Equipment introduces two new reversible plate compactors with hydraulic travel control and exclusive thumb-tip travel operation.
The new BOMAG BPR65/52D-3 and BPR75/60HD-3 reversible plate compactors feature a hydraulic travel control system that ensures a smooth, easy transition from forward to reverse travel modes. An exclusive thumb-tip operated travel lever makes it easy to change direction or to hold the plate in a neutral position.
The 1,146-pound BPR65/52D-3 delivers 14,625 pounds of centrifugal force at 4,380 vibrations per minute. The unit is powered by a 10.2-horsepower, air-cooled Hatz 1D50 diesel engine and can reach working speeds of 78.7 feet per minute. Standard wear strips increase operating width from 20.5 to 26.1 inches. Optional plate extensions increase operating width to 32.3 inches.
The 1,638-pound BPR75/60HD-3 provides 13,950 pounds of centrifugal force at 2,280 vibrations per minute. It is powered by a 14.3-horsepower, air-cooled Hatz 1D81Z diesel engine and can reach working speeds of 82 feet per minute. With standard wear strips, operating width is increased from 22.8 to 28 inches. Optional plate extensions increase operating width to 35.4 inches.
Both new models are designed to deliver optimum results on both granular and mixed soil compaction applications such as construction backfill and trenches. With the addition of higher amplitude and increased travel speeds, the BPR75/60HD-3 also works well in high moisture and cohesive-content materials.
Built to withstand the rigors of any job site, the base plates on both units are constructed of high-grade cast iron and feature reinforced sides to increase strength. An open, self-cleaning design minimizes the build-up of dirt and debris.
Further enhancing durability, the rugged frame protects the engine from abusive job-site conditions while totally enclosed v-belts extend the service life. A travel-lever pressure relief valve prevents pressure spikes from damaging seals in the event that control levers are inadvertently contacted by other on-site equipment.
Built-in buffers on the steering bow reduce hand/arm vibration and increase operator comfort. For improved operator safety, the plates are equipped with a safety button that engages forward travel in the event the operator falls or backs into an obstacle while traveling in reverse. The steering handle adjusts to different working heights to accommodate any operator.
For added convenience, the ignition switch on both units is mounted on the control handle. Though both engines include electric starters, a backup starting crank is included if needed. To prevent accidental engine damage, an automatic shutdown mechanism engages in the event of low oil level.
A single, balanced foldable lifting point makes loading and unloading easy.
For more information concerning the BOMAG BPR65/52D-3 and BPR75/60HD-3 reversible vibratory plate compactors or the complete BOMAG Light Equipment product line, including vibratory tampers, single-direction and reversible vibratory plate compactors, trench compactors, single- and double-drum walk-behind vibratory rollers, and single-drum and tandem ride-on vibratory rollers, contact Compaction America, Inc. 2000 Kentville Road, Kewanee, IL 61443, call 309-853-3571, fax 309-853-1319, e-mail info@compactionamerica.com or visit the BOMAG web site at www.bomag-americas.com.
General Information:
Doug Zoerb
USA
Phone: 309-852-6115 E-mail this person Company Information: Name: Compaction America, Inc. Address: 2000 Kentville Rd. City: Kewanee State: IL ZIP: 61443 1714 Country: USA Phone: 309-853-3571 FAX: 309-852-0350 http://www.bomag-americas.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
